u-boot/include/phy.h
Matt Porter f485c8a35b phy: add support for ET1011C phys
Adds an ET1011C PHY driver which is derived from the
Linux kernel PHY driver (drivers/net/phy/et1011c.c)
from the v3.9-rc2 tag. Note that an errata workaround
config option is implemented to allow for TX_CLK to be
enabled even when gigabit mode is negotiated. This
workaround is used on the PG1.0 TI814X EVM.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
2013-05-10 08:25:54 -04:00

239 lines
6.4 KiB
C

/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Andy Fleming <afleming@freescale.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h
*/
#ifndef _PHY_H
#define _PHY_H
#include <linux/list.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/mdio.h>
#define PHY_MAX_ADDR 32
#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
SUPPORTED_10baseT_Full | \
SUPPORTED_100baseT_Half | \
SUPPORTED_100baseT_Full | \
SUPPORTED_Autoneg | \
SUPPORTED_TP | \
SUPPORTED_MII)
#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
SUPPORTED_1000baseT_Half | \
SUPPORTED_1000baseT_Full)
#define PHY_10G_FEATURES (PHY_GBIT_FEATURES | \
SUPPORTED_10000baseT_Full)
#define PHY_ANEG_TIMEOUT 4000
typedef enum {
PHY_INTERFACE_MODE_MII,
PHY_INTERFACE_MODE_GMII,
PHY_INTERFACE_MODE_SGMII,
PHY_INTERFACE_MODE_TBI,
PHY_INTERFACE_MODE_RMII,
PHY_INTERFACE_MODE_RGMII,
PHY_INTERFACE_MODE_RGMII_ID,
PHY_INTERFACE_MODE_RGMII_RXID,
PHY_INTERFACE_MODE_RGMII_TXID,
PHY_INTERFACE_MODE_RTBI,
PHY_INTERFACE_MODE_XGMII,
PHY_INTERFACE_MODE_NONE /* Must be last */
} phy_interface_t;
static const char *phy_interface_strings[] = {
[PHY_INTERFACE_MODE_MII] = "mii",
[PHY_INTERFACE_MODE_GMII] = "gmii",
[PHY_INTERFACE_MODE_SGMII] = "sgmii",
[PHY_INTERFACE_MODE_TBI] = "tbi",
[PHY_INTERFACE_MODE_RMII] = "rmii",
[PHY_INTERFACE_MODE_RGMII] = "rgmii",
[PHY_INTERFACE_MODE_RGMII_ID] = "rgmii-id",
[PHY_INTERFACE_MODE_RGMII_RXID] = "rgmii-rxid",
[PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid",
[PHY_INTERFACE_MODE_RTBI] = "rtbi",
[PHY_INTERFACE_MODE_XGMII] = "xgmii",
[PHY_INTERFACE_MODE_NONE] = "",
};
static inline const char *phy_string_for_interface(phy_interface_t i)
{
/* Default to unknown */
if (i > PHY_INTERFACE_MODE_NONE)
i = PHY_INTERFACE_MODE_NONE;
return phy_interface_strings[i];
}
struct phy_device;
#define MDIO_NAME_LEN 32
struct mii_dev {
struct list_head link;
char name[MDIO_NAME_LEN];
void *priv;
int (*read)(struct mii_dev *bus, int addr, int devad, int reg);
int (*write)(struct mii_dev *bus, int addr, int devad, int reg,
u16 val);
int (*reset)(struct mii_dev *bus);
struct phy_device *phymap[PHY_MAX_ADDR];
u32 phy_mask;
};
/* struct phy_driver: a structure which defines PHY behavior
*
* uid will contain a number which represents the PHY. During
* startup, the driver will poll the PHY to find out what its
* UID--as defined by registers 2 and 3--is. The 32-bit result
* gotten from the PHY will be masked to
* discard any bits which may change based on revision numbers
* unimportant to functionality
*
*/
struct phy_driver {
char *name;
unsigned int uid;
unsigned int mask;
unsigned int mmds;
u32 features;
/* Called to do any driver startup necessities */
/* Will be called during phy_connect */
int (*probe)(struct phy_device *phydev);
/* Called to configure the PHY, and modify the controller
* based on the results. Should be called after phy_connect */
int (*config)(struct phy_device *phydev);
/* Called when starting up the controller */
int (*startup)(struct phy_device *phydev);
/* Called when bringing down the controller */
int (*shutdown)(struct phy_device *phydev);
struct list_head list;
};
struct phy_device {
/* Information about the PHY type */
/* And management functions */
struct mii_dev *bus;
struct phy_driver *drv;
void *priv;
struct eth_device *dev;
/* forced speed & duplex (no autoneg)
* partner speed & duplex & pause (autoneg)
*/
int speed;
int duplex;
/* The most recently read link state */
int link;
int port;
phy_interface_t interface;
u32 advertising;
u32 supported;
u32 mmds;
int autoneg;
int addr;
int pause;
int asym_pause;
u32 phy_id;
u32 flags;
};
static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
{
struct mii_dev *bus = phydev->bus;
return bus->read(bus, phydev->addr, devad, regnum);
}
static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
u16 val)
{
struct mii_dev *bus = phydev->bus;
return bus->write(bus, phydev->addr, devad, regnum, val);
}
#ifdef CONFIG_PHYLIB_10G
extern struct phy_driver gen10g_driver;
/* For now, XGMII is the only 10G interface */
static inline int is_10g_interface(phy_interface_t interface)
{
return interface == PHY_INTERFACE_MODE_XGMII;
}
#endif
int phy_init(void);
int phy_reset(struct phy_device *phydev);
struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask,
phy_interface_t interface);
void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev);
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
struct eth_device *dev,
phy_interface_t interface);
int phy_startup(struct phy_device *phydev);
int phy_config(struct phy_device *phydev);
int phy_shutdown(struct phy_device *phydev);
int phy_register(struct phy_driver *drv);
int genphy_config_aneg(struct phy_device *phydev);
int genphy_restart_aneg(struct phy_device *phydev);
int genphy_update_link(struct phy_device *phydev);
int genphy_config(struct phy_device *phydev);
int genphy_startup(struct phy_device *phydev);
int genphy_shutdown(struct phy_device *phydev);
int gen10g_config(struct phy_device *phydev);
int gen10g_startup(struct phy_device *phydev);
int gen10g_shutdown(struct phy_device *phydev);
int gen10g_discover_mmds(struct phy_device *phydev);
int phy_atheros_init(void);
int phy_broadcom_init(void);
int phy_davicom_init(void);
int phy_et1011c_init(void);
int phy_lxt_init(void);
int phy_marvell_init(void);
int phy_micrel_init(void);
int phy_natsemi_init(void);
int phy_realtek_init(void);
int phy_smsc_init(void);
int phy_teranetics_init(void);
int phy_vitesse_init(void);
/* PHY UIDs for various PHYs that are referenced in external code */
#define PHY_UID_TN2020 0x00a19410
#endif