u-boot/cpu/at32ap/hsmc3.h
Haavard Skinnemoen df548d3c3e AVR32: Resource management rewrite
Rewrite the resource management code (i.e. I/O memory, clock gating,
gpio) so it doesn't depend on any global state. This is necessary
because this code is heavily used before relocation to RAM, so we
can't write to any global variables.

As an added bonus, this makes u-boot's memory footprint a bit smaller,
although some functionality has been left out; all clocks are enabled
all the time, and there's no checking for gpio line conflicts.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-04-14 15:20:27 +02:00

126 lines
3.6 KiB
C

/*
* Register definitions for Static Memory Controller
*/
#ifndef __CPU_AT32AP_HSMC3_H__
#define __CPU_AT32AP_HSMC3_H__
/* HSMC3 register offsets */
#define HSMC3_SETUP0 0x0000
#define HSMC3_PULSE0 0x0004
#define HSMC3_CYCLE0 0x0008
#define HSMC3_MODE0 0x000c
#define HSMC3_SETUP1 0x0010
#define HSMC3_PULSE1 0x0014
#define HSMC3_CYCLE1 0x0018
#define HSMC3_MODE1 0x001c
#define HSMC3_SETUP2 0x0020
#define HSMC3_PULSE2 0x0024
#define HSMC3_CYCLE2 0x0028
#define HSMC3_MODE2 0x002c
#define HSMC3_SETUP3 0x0030
#define HSMC3_PULSE3 0x0034
#define HSMC3_CYCLE3 0x0038
#define HSMC3_MODE3 0x003c
#define HSMC3_SETUP4 0x0040
#define HSMC3_PULSE4 0x0044
#define HSMC3_CYCLE4 0x0048
#define HSMC3_MODE4 0x004c
#define HSMC3_SETUP5 0x0050
#define HSMC3_PULSE5 0x0054
#define HSMC3_CYCLE5 0x0058
#define HSMC3_MODE5 0x005c
/* Bitfields in SETUP0 */
#define HSMC3_NWE_SETUP_OFFSET 0
#define HSMC3_NWE_SETUP_SIZE 6
#define HSMC3_NCS_WR_SETUP_OFFSET 8
#define HSMC3_NCS_WR_SETUP_SIZE 6
#define HSMC3_NRD_SETUP_OFFSET 16
#define HSMC3_NRD_SETUP_SIZE 6
#define HSMC3_NCS_RD_SETUP_OFFSET 24
#define HSMC3_NCS_RD_SETUP_SIZE 6
/* Bitfields in PULSE0 */
#define HSMC3_NWE_PULSE_OFFSET 0
#define HSMC3_NWE_PULSE_SIZE 7
#define HSMC3_NCS_WR_PULSE_OFFSET 8
#define HSMC3_NCS_WR_PULSE_SIZE 7
#define HSMC3_NRD_PULSE_OFFSET 16
#define HSMC3_NRD_PULSE_SIZE 7
#define HSMC3_NCS_RD_PULSE_OFFSET 24
#define HSMC3_NCS_RD_PULSE_SIZE 7
/* Bitfields in CYCLE0 */
#define HSMC3_NWE_CYCLE_OFFSET 0
#define HSMC3_NWE_CYCLE_SIZE 9
#define HSMC3_NRD_CYCLE_OFFSET 16
#define HSMC3_NRD_CYCLE_SIZE 9
/* Bitfields in MODE0 */
#define HSMC3_READ_MODE_OFFSET 0
#define HSMC3_READ_MODE_SIZE 1
#define HSMC3_WRITE_MODE_OFFSET 1
#define HSMC3_WRITE_MODE_SIZE 1
#define HSMC3_EXNW_MODE_OFFSET 4
#define HSMC3_EXNW_MODE_SIZE 2
#define HSMC3_BAT_OFFSET 8
#define HSMC3_BAT_SIZE 1
#define HSMC3_DBW_OFFSET 12
#define HSMC3_DBW_SIZE 2
#define HSMC3_TDF_CYCLES_OFFSET 16
#define HSMC3_TDF_CYCLES_SIZE 4
#define HSMC3_TDF_MODE_OFFSET 20
#define HSMC3_TDF_MODE_SIZE 1
#define HSMC3_PMEN_OFFSET 24
#define HSMC3_PMEN_SIZE 1
#define HSMC3_PS_OFFSET 28
#define HSMC3_PS_SIZE 2
/* Bitfields in MODE1 */
#define HSMC3_PD_OFFSET 28
#define HSMC3_PD_SIZE 2
/* Constants for READ_MODE */
#define HSMC3_READ_MODE_NCS_CONTROLLED 0
#define HSMC3_READ_MODE_NRD_CONTROLLED 1
/* Constants for WRITE_MODE */
#define HSMC3_WRITE_MODE_NCS_CONTROLLED 0
#define HSMC3_WRITE_MODE_NWE_CONTROLLED 1
/* Constants for EXNW_MODE */
#define HSMC3_EXNW_MODE_DISABLED 0
#define HSMC3_EXNW_MODE_RESERVED 1
#define HSMC3_EXNW_MODE_FROZEN 2
#define HSMC3_EXNW_MODE_READY 3
/* Constants for BAT */
#define HSMC3_BAT_BYTE_SELECT 0
#define HSMC3_BAT_BYTE_WRITE 1
/* Constants for DBW */
#define HSMC3_DBW_8_BITS 0
#define HSMC3_DBW_16_BITS 1
#define HSMC3_DBW_32_BITS 2
/* Bit manipulation macros */
#define HSMC3_BIT(name) \
(1 << HSMC3_##name##_OFFSET)
#define HSMC3_BF(name,value) \
(((value) & ((1 << HSMC3_##name##_SIZE) - 1)) \
<< HSMC3_##name##_OFFSET)
#define HSMC3_BFEXT(name,value) \
(((value) >> HSMC3_##name##_OFFSET) \
& ((1 << HSMC3_##name##_SIZE) - 1))
#define HSMC3_BFINS(name,value,old)\
(((old) & ~(((1 << HSMC3_##name##_SIZE) - 1) \
<< HSMC3_##name##_OFFSET)) \
| HSMC3_BF(name,value))
/* Register access macros */
#define hsmc3_readl(reg) \
readl((void *)HSMC_BASE + HSMC3_##reg)
#define hsmc3_writel(reg,value) \
writel((value), (void *)HSMC_BASE + HSMC3_##reg)
#endif /* __CPU_AT32AP_HSMC3_H__ */