u-boot/drivers/phy/allwinner/phy-sun4i-usb.c
Simon Glass caa4daa2ae dm: treewide: Rename 'platdata' variables to just 'plat'
We use 'priv' for private data but often use 'platdata' for platform data.
We can't really use 'pdata' since that is ambiguous (it could mean private
or platform data).

Rename some of the latter variables to end with 'plat' for consistency.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:08 -07:00

651 lines
16 KiB
C

/*
* Allwinner sun4i USB PHY driver
*
* Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
* Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
*
* Modelled arch/arm/mach-sunxi/usb_phy.c to compatible with generic-phy.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <log.h>
#include <dm/device.h>
#include <generic-phy.h>
#include <phy-sun4i-usb.h>
#include <reset.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <dm/device_compat.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/err.h>
#define REG_ISCR 0x00
#define REG_PHYCTL_A10 0x04
#define REG_PHYBIST 0x08
#define REG_PHYTUNE 0x0c
#define REG_PHYCTL_A33 0x10
#define REG_PHY_OTGCTL 0x20
#define REG_PMU_UNK1 0x10
/* Common Control Bits for Both PHYs */
#define PHY_PLL_BW 0x03
#define PHY_RES45_CAL_EN 0x0c
/* Private Control Bits for Each PHY */
#define PHY_TX_AMPLITUDE_TUNE 0x20
#define PHY_TX_SLEWRATE_TUNE 0x22
#define PHY_DISCON_TH_SEL 0x2a
#define PHY_SQUELCH_DETECT 0x3c
#define PHYCTL_DATA BIT(7)
#define OTGCTL_ROUTE_MUSB BIT(0)
#define PHY_TX_RATE BIT(4)
#define PHY_TX_MAGNITUDE BIT(2)
#define PHY_TX_AMPLITUDE_LEN 5
#define PHY_RES45_CAL_DATA BIT(0)
#define PHY_RES45_CAL_LEN 1
#define PHY_DISCON_TH_LEN 2
#define SUNXI_AHB_ICHR8_EN BIT(10)
#define SUNXI_AHB_INCR4_BURST_EN BIT(9)
#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8)
#define SUNXI_ULPI_BYPASS_EN BIT(0)
/* A83T specific control bits for PHY0 */
#define PHY_CTL_VBUSVLDEXT BIT(5)
#define PHY_CTL_SIDDQ BIT(3)
/* A83T specific control bits for PHY2 HSIC */
#define SUNXI_EHCI_HS_FORCE BIT(20)
#define SUNXI_HSIC_CONNECT_INT BIT(16)
#define SUNXI_HSIC BIT(1)
#define MAX_PHYS 4
enum sun4i_usb_phy_type {
sun4i_a10_phy,
sun6i_a31_phy,
sun8i_a33_phy,
sun8i_a83t_phy,
sun8i_h3_phy,
sun8i_r40_phy,
sun8i_v3s_phy,
sun50i_a64_phy,
sun50i_h6_phy,
};
struct sun4i_usb_phy_cfg {
int num_phys;
enum sun4i_usb_phy_type type;
u32 disc_thresh;
u8 phyctl_offset;
bool dedicated_clocks;
bool enable_pmu_unk1;
bool phy0_dual_route;
int missing_phys;
};
struct sun4i_usb_phy_info {
const char *gpio_vbus;
const char *gpio_vbus_det;
const char *gpio_id_det;
} phy_info[] = {
{
.gpio_vbus = CONFIG_USB0_VBUS_PIN,
.gpio_vbus_det = CONFIG_USB0_VBUS_DET,
.gpio_id_det = CONFIG_USB0_ID_DET,
},
{
.gpio_vbus = CONFIG_USB1_VBUS_PIN,
.gpio_vbus_det = NULL,
.gpio_id_det = NULL,
},
{
.gpio_vbus = CONFIG_USB2_VBUS_PIN,
.gpio_vbus_det = NULL,
.gpio_id_det = NULL,
},
{
.gpio_vbus = CONFIG_USB3_VBUS_PIN,
.gpio_vbus_det = NULL,
.gpio_id_det = NULL,
},
};
struct sun4i_usb_phy_plat {
void __iomem *pmu;
int power_on_count;
int gpio_vbus;
int gpio_vbus_det;
int gpio_id_det;
struct clk clocks;
struct reset_ctl resets;
int id;
};
struct sun4i_usb_phy_data {
void __iomem *base;
const struct sun4i_usb_phy_cfg *cfg;
struct sun4i_usb_phy_plat *usb_phy;
};
static int initial_usb_scan_delay = CONFIG_INITIAL_USB_SCAN_DELAY;
static void sun4i_usb_phy_write(struct phy *phy, u32 addr, u32 data, int len)
{
struct sun4i_usb_phy_data *phy_data = dev_get_priv(phy->dev);
struct sun4i_usb_phy_plat *usb_phy = &phy_data->usb_phy[phy->id];
u32 temp, usbc_bit = BIT(usb_phy->id * 2);
void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
int i;
if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
/* SoCs newer than A33 need us to set phyctl to 0 explicitly */
writel(0, phyctl);
}
for (i = 0; i < len; i++) {
temp = readl(phyctl);
/* clear the address portion */
temp &= ~(0xff << 8);
/* set the address */
temp |= ((addr + i) << 8);
writel(temp, phyctl);
/* set the data bit and clear usbc bit*/
temp = readb(phyctl);
if (data & 0x1)
temp |= PHYCTL_DATA;
else
temp &= ~PHYCTL_DATA;
temp &= ~usbc_bit;
writeb(temp, phyctl);
/* pulse usbc_bit */
temp = readb(phyctl);
temp |= usbc_bit;
writeb(temp, phyctl);
temp = readb(phyctl);
temp &= ~usbc_bit;
writeb(temp, phyctl);
data >>= 1;
}
}
static void sun4i_usb_phy_passby(struct phy *phy, bool enable)
{
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
u32 bits, reg_value;
if (!usb_phy->pmu)
return;
bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
/* A83T USB2 is HSIC */
if (data->cfg->type == sun8i_a83t_phy && usb_phy->id == 2)
bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT |
SUNXI_HSIC;
reg_value = readl(usb_phy->pmu);
if (enable)
reg_value |= bits;
else
reg_value &= ~bits;
writel(reg_value, usb_phy->pmu);
}
static int sun4i_usb_phy_power_on(struct phy *phy)
{
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
if (initial_usb_scan_delay) {
mdelay(initial_usb_scan_delay);
initial_usb_scan_delay = 0;
}
usb_phy->power_on_count++;
if (usb_phy->power_on_count != 1)
return 0;
if (usb_phy->gpio_vbus >= 0)
gpio_set_value(usb_phy->gpio_vbus, SUNXI_GPIO_PULL_UP);
return 0;
}
static int sun4i_usb_phy_power_off(struct phy *phy)
{
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
usb_phy->power_on_count--;
if (usb_phy->power_on_count != 0)
return 0;
if (usb_phy->gpio_vbus >= 0)
gpio_set_value(usb_phy->gpio_vbus, SUNXI_GPIO_PULL_DISABLE);
return 0;
}
static void sun4i_usb_phy0_reroute(struct sun4i_usb_phy_data *data, bool id_det)
{
u32 regval;
regval = readl(data->base + REG_PHY_OTGCTL);
if (!id_det) {
/* Host mode. Route phy0 to EHCI/OHCI */
regval &= ~OTGCTL_ROUTE_MUSB;
} else {
/* Peripheral mode. Route phy0 to MUSB */
regval |= OTGCTL_ROUTE_MUSB;
}
writel(regval, data->base + REG_PHY_OTGCTL);
}
static int sun4i_usb_phy_init(struct phy *phy)
{
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
u32 val;
int ret;
ret = clk_enable(&usb_phy->clocks);
if (ret) {
dev_err(phy->dev, "failed to enable usb_%ldphy clock\n",
phy->id);
return ret;
}
ret = reset_deassert(&usb_phy->resets);
if (ret) {
dev_err(phy->dev, "failed to deassert usb_%ldreset reset\n",
phy->id);
return ret;
}
if (data->cfg->type == sun8i_a83t_phy ||
data->cfg->type == sun50i_h6_phy) {
if (phy->id == 0) {
val = readl(data->base + data->cfg->phyctl_offset);
val |= PHY_CTL_VBUSVLDEXT;
val &= ~PHY_CTL_SIDDQ;
writel(val, data->base + data->cfg->phyctl_offset);
}
} else {
if (usb_phy->pmu && data->cfg->enable_pmu_unk1) {
val = readl(usb_phy->pmu + REG_PMU_UNK1);
writel(val & ~2, usb_phy->pmu + REG_PMU_UNK1);
}
if (usb_phy->id == 0)
sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN,
PHY_RES45_CAL_DATA,
PHY_RES45_CAL_LEN);
/* Adjust PHY's magnitude and rate */
sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE,
PHY_TX_MAGNITUDE | PHY_TX_RATE,
PHY_TX_AMPLITUDE_LEN);
/* Disconnect threshold adjustment */
sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
data->cfg->disc_thresh, PHY_DISCON_TH_LEN);
}
sun4i_usb_phy_passby(phy, true);
sun4i_usb_phy0_reroute(data, true);
return 0;
}
static int sun4i_usb_phy_exit(struct phy *phy)
{
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
int ret;
if (phy->id == 0) {
if (data->cfg->type == sun8i_a83t_phy ||
data->cfg->type == sun50i_h6_phy) {
void __iomem *phyctl = data->base +
data->cfg->phyctl_offset;
writel(readl(phyctl) | PHY_CTL_SIDDQ, phyctl);
}
}
sun4i_usb_phy_passby(phy, false);
ret = clk_disable(&usb_phy->clocks);
if (ret) {
dev_err(phy->dev, "failed to disable usb_%ldphy clock\n",
phy->id);
return ret;
}
ret = reset_assert(&usb_phy->resets);
if (ret) {
dev_err(phy->dev, "failed to assert usb_%ldreset reset\n",
phy->id);
return ret;
}
return 0;
}
static int sun4i_usb_phy_xlate(struct phy *phy,
struct ofnode_phandle_args *args)
{
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
if (args->args_count >= data->cfg->num_phys)
return -EINVAL;
if (data->cfg->missing_phys & BIT(args->args[0]))
return -ENODEV;
if (args->args_count)
phy->id = args->args[0];
else
phy->id = 0;
debug("%s: phy_id = %ld\n", __func__, phy->id);
return 0;
}
int sun4i_usb_phy_vbus_detect(struct phy *phy)
{
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
int err, retries = 3;
debug("%s: id_det = %d\n", __func__, usb_phy->gpio_id_det);
if (usb_phy->gpio_vbus_det < 0)
return usb_phy->gpio_vbus_det;
err = gpio_get_value(usb_phy->gpio_vbus_det);
/*
* Vbus may have been provided by the board and just been turned of
* some milliseconds ago on reset, what we're measuring then is a
* residual charge on Vbus, sleep a bit and try again.
*/
while (err > 0 && retries--) {
mdelay(100);
err = gpio_get_value(usb_phy->gpio_vbus_det);
}
return err;
}
int sun4i_usb_phy_id_detect(struct phy *phy)
{
struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
debug("%s: id_det = %d\n", __func__, usb_phy->gpio_id_det);
if (usb_phy->gpio_id_det < 0)
return usb_phy->gpio_id_det;
return gpio_get_value(usb_phy->gpio_id_det);
}
void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled)
{
sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
}
static struct phy_ops sun4i_usb_phy_ops = {
.of_xlate = sun4i_usb_phy_xlate,
.init = sun4i_usb_phy_init,
.power_on = sun4i_usb_phy_power_on,
.power_off = sun4i_usb_phy_power_off,
.exit = sun4i_usb_phy_exit,
};
static int sun4i_usb_phy_probe(struct udevice *dev)
{
struct sun4i_usb_phy_plat *plat = dev_get_platdata(dev);
struct sun4i_usb_phy_data *data = dev_get_priv(dev);
int i, ret;
data->cfg = (const struct sun4i_usb_phy_cfg *)dev_get_driver_data(dev);
if (!data->cfg)
return -EINVAL;
data->base = (void __iomem *)devfdt_get_addr_name(dev, "phy_ctrl");
if (IS_ERR(data->base))
return PTR_ERR(data->base);
data->usb_phy = plat;
for (i = 0; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy_plat *phy = &plat[i];
struct sun4i_usb_phy_info *info = &phy_info[i];
char name[16];
if (data->cfg->missing_phys & BIT(i))
continue;
phy->gpio_vbus = sunxi_name_to_gpio(info->gpio_vbus);
if (phy->gpio_vbus >= 0) {
ret = gpio_request(phy->gpio_vbus, "usb_vbus");
if (ret)
return ret;
ret = gpio_direction_output(phy->gpio_vbus, 0);
if (ret)
return ret;
}
phy->gpio_vbus_det = sunxi_name_to_gpio(info->gpio_vbus_det);
if (phy->gpio_vbus_det >= 0) {
ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
if (ret)
return ret;
ret = gpio_direction_input(phy->gpio_vbus_det);
if (ret)
return ret;
}
phy->gpio_id_det = sunxi_name_to_gpio(info->gpio_id_det);
if (phy->gpio_id_det >= 0) {
ret = gpio_request(phy->gpio_id_det, "usb_id_det");
if (ret)
return ret;
ret = gpio_direction_input(phy->gpio_id_det);
if (ret)
return ret;
sunxi_gpio_set_pull(phy->gpio_id_det, SUNXI_GPIO_PULL_UP);
}
if (data->cfg->dedicated_clocks)
snprintf(name, sizeof(name), "usb%d_phy", i);
else
strlcpy(name, "usb_phy", sizeof(name));
ret = clk_get_by_name(dev, name, &phy->clocks);
if (ret) {
dev_err(dev, "failed to get usb%d_phy clock phandle\n", i);
return ret;
}
snprintf(name, sizeof(name), "usb%d_reset", i);
ret = reset_get_by_name(dev, name, &phy->resets);
if (ret) {
dev_err(dev, "failed to get usb%d_reset reset phandle\n", i);
return ret;
}
if (i || data->cfg->phy0_dual_route) {
snprintf(name, sizeof(name), "pmu%d", i);
phy->pmu = (void __iomem *)devfdt_get_addr_name(dev, name);
if (IS_ERR(phy->pmu))
return PTR_ERR(phy->pmu);
}
phy->id = i;
};
debug("Allwinner Sun4I USB PHY driver loaded\n");
return 0;
}
static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.num_phys = 3,
.type = sun4i_a10_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.num_phys = 2,
.type = sun4i_a10_phy,
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.num_phys = 3,
.type = sun6i_a31_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.num_phys = 3,
.type = sun4i_a10_phy,
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.num_phys = 2,
.type = sun4i_a10_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.num_phys = 2,
.type = sun8i_a33_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
.num_phys = 3,
.type = sun8i_a83t_phy,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
};
static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.num_phys = 4,
.type = sun8i_h3_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = true,
.phy0_dual_route = true,
};
static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
.num_phys = 3,
.type = sun8i_r40_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = true,
.phy0_dual_route = true,
};
static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
.num_phys = 1,
.type = sun8i_v3s_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = true,
.phy0_dual_route = true,
};
static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.num_phys = 2,
.type = sun50i_a64_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = true,
.phy0_dual_route = true,
};
static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
.num_phys = 4,
.type = sun50i_h6_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = true,
.phy0_dual_route = true,
.missing_phys = BIT(1) | BIT(2),
};
static const struct udevice_id sun4i_usb_phy_ids[] = {
{ .compatible = "allwinner,sun4i-a10-usb-phy", .data = (ulong)&sun4i_a10_cfg },
{ .compatible = "allwinner,sun5i-a13-usb-phy", .data = (ulong)&sun5i_a13_cfg },
{ .compatible = "allwinner,sun6i-a31-usb-phy", .data = (ulong)&sun6i_a31_cfg },
{ .compatible = "allwinner,sun7i-a20-usb-phy", .data = (ulong)&sun7i_a20_cfg },
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = (ulong)&sun8i_a23_cfg },
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = (ulong)&sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-a83t-usb-phy", .data = (ulong)&sun8i_a83t_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = (ulong)&sun8i_h3_cfg },
{ .compatible = "allwinner,sun8i-r40-usb-phy", .data = (ulong)&sun8i_r40_cfg },
{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = (ulong)&sun8i_v3s_cfg },
{ .compatible = "allwinner,sun50i-a64-usb-phy", .data = (ulong)&sun50i_a64_cfg},
{ .compatible = "allwinner,sun50i-h6-usb-phy", .data = (ulong)&sun50i_h6_cfg},
{ }
};
U_BOOT_DRIVER(sun4i_usb_phy) = {
.name = "sun4i_usb_phy",
.id = UCLASS_PHY,
.of_match = sun4i_usb_phy_ids,
.ops = &sun4i_usb_phy_ops,
.probe = sun4i_usb_phy_probe,
.plat_auto = sizeof(struct sun4i_usb_phy_plat[MAX_PHYS]),
.priv_auto = sizeof(struct sun4i_usb_phy_data),
};