mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 23:51:33 +00:00
817e153fe5
When running against RC_OSC_32k, the watchdog may suffer from running faster than expected, expiring earlier. The Linux kernel adds a 10% margin to the timeout calculation by slowing down the read clock rate accordingly. Do the same here, also to have comparable preset values for both drivers. Along this, fix the name of the local var holding to frequency - in Hz, not kHz. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Roese <sr@denx.de>
219 lines
4.5 KiB
C
219 lines
4.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) Siemens AG, 2020
|
|
*
|
|
* Authors:
|
|
* Jan Kiszka <jan.kiszka@siemens.com>
|
|
*
|
|
* Derived from linux/drivers/watchdog/rti_wdt.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <power-domain.h>
|
|
#include <wdt.h>
|
|
#include <asm/io.h>
|
|
#include <remoteproc.h>
|
|
|
|
/* Timer register set definition */
|
|
#define RTIDWDCTRL 0x90
|
|
#define RTIDWDPRLD 0x94
|
|
#define RTIWDSTATUS 0x98
|
|
#define RTIWDKEY 0x9c
|
|
#define RTIDWDCNTR 0xa0
|
|
#define RTIWWDRXCTRL 0xa4
|
|
#define RTIWWDSIZECTRL 0xa8
|
|
|
|
#define RTIWWDRX_NMI 0xa
|
|
|
|
#define RTIWWDSIZE_50P 0x50
|
|
|
|
#define WDENABLE_KEY 0xa98559da
|
|
|
|
#define WDKEY_SEQ0 0xe51a
|
|
#define WDKEY_SEQ1 0xa35c
|
|
|
|
#define WDT_PRELOAD_SHIFT 13
|
|
|
|
#define WDT_PRELOAD_MAX 0xfff
|
|
|
|
struct rti_wdt_priv {
|
|
phys_addr_t regs;
|
|
unsigned int clk_hz;
|
|
};
|
|
|
|
#ifdef CONFIG_WDT_K3_RTI_LOAD_FW
|
|
#define RTI_WDT_FIT_PATH "/fit-images/k3-rti-wdt-firmware"
|
|
|
|
static int rti_wdt_load_fw(struct udevice *dev)
|
|
{
|
|
struct udevice *rproc_dev;
|
|
int primary_core, ret;
|
|
u32 cluster_mode;
|
|
ofnode node;
|
|
u64 rti_wdt_fw;
|
|
u32 rti_wdt_fw_size;
|
|
|
|
node = ofnode_path(RTI_WDT_FIT_PATH);
|
|
if (!ofnode_valid(node))
|
|
goto fit_error;
|
|
|
|
ret = ofnode_read_u64(node, "load", &rti_wdt_fw);
|
|
if (ret)
|
|
goto fit_error;
|
|
ret = ofnode_read_u32(node, "size", &rti_wdt_fw_size);
|
|
if (ret)
|
|
goto fit_error;
|
|
|
|
node = ofnode_by_compatible(ofnode_null(), "ti,am654-r5fss");
|
|
if (!ofnode_valid(node))
|
|
goto dt_error;
|
|
|
|
ret = ofnode_read_u32(node, "ti,cluster-mode", &cluster_mode);
|
|
if (ret)
|
|
cluster_mode = 1;
|
|
|
|
node = ofnode_by_compatible(node, "ti,am654-r5f");
|
|
if (!ofnode_valid(node))
|
|
goto dt_error;
|
|
|
|
ret = uclass_get_device_by_ofnode(UCLASS_REMOTEPROC, node, &rproc_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
primary_core = dev_seq(rproc_dev);
|
|
|
|
ret = rproc_dev_init(primary_core);
|
|
if (ret)
|
|
goto fw_error;
|
|
|
|
if (cluster_mode == 1) {
|
|
ret = rproc_dev_init(primary_core + 1);
|
|
if (ret)
|
|
goto fw_error;
|
|
}
|
|
|
|
ret = rproc_load(primary_core, (ulong)rti_wdt_fw,
|
|
rti_wdt_fw_size);
|
|
if (ret)
|
|
goto fw_error;
|
|
|
|
ret = rproc_start(primary_core);
|
|
if (ret)
|
|
goto fw_error;
|
|
|
|
return 0;
|
|
|
|
fit_error:
|
|
dev_err(dev, "No loadable firmware found under %s\n", RTI_WDT_FIT_PATH);
|
|
return -ENOENT;
|
|
|
|
dt_error:
|
|
dev_err(dev, "No compatible firmware target processor found\n");
|
|
return -ENODEV;
|
|
|
|
fw_error:
|
|
dev_err(dev, "Failed to load watchdog firmware into remote processor %d\n",
|
|
primary_core);
|
|
return ret;
|
|
}
|
|
#else
|
|
static inline int rti_wdt_load_fw(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
|
|
{
|
|
struct rti_wdt_priv *priv = dev_get_priv(dev);
|
|
u32 timer_margin;
|
|
int ret;
|
|
|
|
if (readl(priv->regs + RTIDWDCTRL) == WDENABLE_KEY)
|
|
return -EBUSY;
|
|
|
|
ret = rti_wdt_load_fw(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
timer_margin = timeout_ms * priv->clk_hz / 1000;
|
|
timer_margin >>= WDT_PRELOAD_SHIFT;
|
|
if (timer_margin > WDT_PRELOAD_MAX)
|
|
timer_margin = WDT_PRELOAD_MAX;
|
|
|
|
writel(timer_margin, priv->regs + RTIDWDPRLD);
|
|
writel(RTIWWDRX_NMI, priv->regs + RTIWWDRXCTRL);
|
|
writel(RTIWWDSIZE_50P, priv->regs + RTIWWDSIZECTRL);
|
|
|
|
readl(priv->regs + RTIWWDSIZECTRL);
|
|
|
|
writel(WDENABLE_KEY, priv->regs + RTIDWDCTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rti_wdt_reset(struct udevice *dev)
|
|
{
|
|
struct rti_wdt_priv *priv = dev_get_priv(dev);
|
|
u32 prld;
|
|
|
|
/* Make sure we do not reset too early */
|
|
prld = readl(priv->regs + RTIDWDPRLD) << WDT_PRELOAD_SHIFT;
|
|
if (readl(priv->regs + RTIDWDCNTR) >= prld / 2)
|
|
return -EPERM;
|
|
|
|
writel(WDKEY_SEQ0, priv->regs + RTIWDKEY);
|
|
writel(WDKEY_SEQ1, priv->regs + RTIWDKEY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rti_wdt_probe(struct udevice *dev)
|
|
{
|
|
struct rti_wdt_priv *priv = dev_get_priv(dev);
|
|
struct clk clk;
|
|
int ret;
|
|
|
|
priv->regs = devfdt_get_addr(dev);
|
|
if (!priv->regs)
|
|
return -EINVAL;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->clk_hz = clk_get_rate(&clk);
|
|
|
|
/*
|
|
* If watchdog is running at 32k clock, it is not accurate.
|
|
* Adjust frequency down in this case so that it does not expire
|
|
* earlier than expected.
|
|
*/
|
|
if (priv->clk_hz < 32768)
|
|
priv->clk_hz = priv->clk_hz * 9 / 10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct wdt_ops rti_wdt_ops = {
|
|
.start = rti_wdt_start,
|
|
.reset = rti_wdt_reset,
|
|
};
|
|
|
|
static const struct udevice_id rti_wdt_ids[] = {
|
|
{ .compatible = "ti,j7-rti-wdt" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rti_wdt) = {
|
|
.name = "rti_wdt",
|
|
.id = UCLASS_WDT,
|
|
.of_match = rti_wdt_ids,
|
|
.ops = &rti_wdt_ops,
|
|
.probe = rti_wdt_probe,
|
|
.priv_auto = sizeof(struct rti_wdt_priv),
|
|
.flags = DM_FLAG_LEAVE_PD_ON,
|
|
};
|