Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-30 16:39:35 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/mpc8xx_fec.c
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header 
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

856 lines
22 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#include <common.h>
#include <command.h>
#include <hang.h>
#include <malloc.h>
#include <net.h>
#include <netdev.h>
#include <asm/cpm_8xx.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <linux/delay.h>
#include <phy.h>
#include <linux/mii.h>
DECLARE_GLOBAL_DATA_PTR;
/* define WANT_MII when MII support is required */
#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
#define WANT_MII
#else
#undef WANT_MII
#endif
#if defined(WANT_MII)
#include <miiphy.h>
#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
#error "CONFIG_MII has to be defined!"
#endif
#endif
#if defined(CONFIG_RMII) && !defined(WANT_MII)
#error RMII support is unusable without a working PHY.
#endif
#ifdef CONFIG_SYS_DISCOVER_PHY
static int mii_discover_phy(struct eth_device *dev);
#endif
int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg);
int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
u16 value);
static struct ether_fcc_info_s
{
int ether_index;
int fecp_offset;
int phy_addr;
int actual_phy_addr;
int initialized;
}
ether_fcc_info[] = {
#if defined(CONFIG_ETHER_ON_FEC1)
{
0,
offsetof(immap_t, im_cpm.cp_fec1),
CONFIG_FEC1_PHY,
-1,
0,
},
#endif
#if defined(CONFIG_ETHER_ON_FEC2)
{
1,
offsetof(immap_t, im_cpm.cp_fec2),
CONFIG_FEC2_PHY,
-1,
0,
},
#endif
};
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
#define TX_BUF_CNT 2
#define TOUT_LOOP 100
#define PKT_MAXBUF_SIZE 1518
#define PKT_MINBUF_SIZE 64
#define PKT_MAXBLR_SIZE 1520
#ifdef __GNUC__
static char txbuf[DBUF_LENGTH] __aligned(8);
#else
#error txbuf must be aligned.
#endif
static uint rxIdx; /* index of the current RX buffer */
static uint txIdx; /* index of the current TX buffer */
/*
* FEC Ethernet Tx and Rx buffer descriptors allocated at the
* immr->udata_bd address on Dual-Port RAM
* Provide for Double Buffering
*/
struct common_buf_desc {
cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
};
static struct common_buf_desc __iomem *rtx;
static int fec_send(struct eth_device *dev, void *packet, int length);
static int fec_recv(struct eth_device *dev);
static int fec_init(struct eth_device *dev, struct bd_info *bd);
static void fec_halt(struct eth_device *dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
static void __mii_init(void);
#endif
int fec_initialize(struct bd_info *bis)
{
struct eth_device *dev;
struct ether_fcc_info_s *efis;
int i;
for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++) {
dev = malloc(sizeof(*dev));
if (dev == NULL)
hang();
memset(dev, 0, sizeof(*dev));
/* for FEC1 make sure that the name of the interface is the same
as the old one for compatibility reasons */
if (i == 0)
strcpy(dev->name, "FEC");
else
sprintf(dev->name, "FEC%d",
ether_fcc_info[i].ether_index + 1);
efis = &ether_fcc_info[i];
/*
* reset actual phy addr
*/
efis->actual_phy_addr = -1;
dev->priv = efis;
dev->init = fec_init;
dev->halt = fec_halt;
dev->send = fec_send;
dev->recv = fec_recv;
eth_register(dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
int retval;
struct mii_dev *mdiodev = mdio_alloc();
if (!mdiodev)
return -ENOMEM;
strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
mdiodev->read = fec8xx_miiphy_read;
mdiodev->write = fec8xx_miiphy_write;
retval = mdio_register(mdiodev);
if (retval < 0)
return retval;
#endif
}
return 1;
}
static int fec_send(struct eth_device *dev, void *packet, int length)
{
int j, rc;
struct ether_fcc_info_s *efis = dev->priv;
fec_t __iomem *fecp =
(fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
/* section 16.9.23.3
* Wait for ready
*/
j = 0;
while ((in_be16(&rtx->txbd[txIdx].cbd_sc) & BD_ENET_TX_READY) &&
(j < TOUT_LOOP)) {
udelay(1);
j++;
}
if (j >= TOUT_LOOP)
printf("TX not ready\n");
out_be32(&rtx->txbd[txIdx].cbd_bufaddr, (uint)packet);
out_be16(&rtx->txbd[txIdx].cbd_datlen, length);
setbits_be16(&rtx->txbd[txIdx].cbd_sc,
BD_ENET_TX_READY | BD_ENET_TX_LAST);
/* Activate transmit Buffer Descriptor polling */
/* Descriptor polling active */
out_be32(&fecp->fec_x_des_active, 0x01000000);
j = 0;
while ((in_be16(&rtx->txbd[txIdx].cbd_sc) & BD_ENET_TX_READY) &&
(j < TOUT_LOOP)) {
udelay(1);
j++;
}
if (j >= TOUT_LOOP)
printf("TX timeout\n");
/* return only status bits */;
rc = in_be16(&rtx->txbd[txIdx].cbd_sc) & BD_ENET_TX_STATS;
txIdx = (txIdx + 1) % TX_BUF_CNT;
return rc;
}
static int fec_recv(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
fec_t __iomem *fecp =
(fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
int length;
for (;;) {
/* section 16.9.23.2 */
if (in_be16(&rtx->rxbd[rxIdx].cbd_sc) & BD_ENET_RX_EMPTY) {
length = -1;
break; /* nothing received - leave for() loop */
}
length = in_be16(&rtx->rxbd[rxIdx].cbd_datlen);
if (!(in_be16(&rtx->rxbd[rxIdx].cbd_sc) & 0x003f)) {
uchar *rx = net_rx_packets[rxIdx];
length -= 4;
#if defined(CONFIG_CMD_CDP)
if ((rx[0] & 1) != 0 &&
memcmp((uchar *)rx, net_bcast_ethaddr, 6) != 0 &&
!is_cdp_packet((uchar *)rx))
rx = NULL;
#endif
/*
* Pass the packet up to the protocol layers.
*/
if (rx != NULL)
net_process_received_packet(rx, length);
}
/* Give the buffer back to the FEC. */
out_be16(&rtx->rxbd[rxIdx].cbd_datlen, 0);
/* wrap around buffer index when necessary */
if ((rxIdx + 1) >= PKTBUFSRX) {
out_be16(&rtx->rxbd[PKTBUFSRX - 1].cbd_sc,
BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
rxIdx = 0;
} else {
out_be16(&rtx->rxbd[rxIdx].cbd_sc, BD_ENET_RX_EMPTY);
rxIdx++;
}
/* Try to fill Buffer Descriptors */
/* Descriptor polling active */
out_be32(&fecp->fec_r_des_active, 0x01000000);
}
return length;
}
/**************************************************************
*
* FEC Ethernet Initialization Routine
*
*************************************************************/
#define FEC_ECNTRL_PINMUX 0x00000004
#define FEC_ECNTRL_ETHER_EN 0x00000002
#define FEC_ECNTRL_RESET 0x00000001
#define FEC_RCNTRL_BC_REJ 0x00000010
#define FEC_RCNTRL_PROM 0x00000008
#define FEC_RCNTRL_MII_MODE 0x00000004
#define FEC_RCNTRL_DRT 0x00000002
#define FEC_RCNTRL_LOOP 0x00000001
#define FEC_TCNTRL_FDEN 0x00000004
#define FEC_TCNTRL_HBC 0x00000002
#define FEC_TCNTRL_GTS 0x00000001
#define FEC_RESET_DELAY 50
#if defined(CONFIG_RMII)
static inline void fec_10Mbps(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
int fecidx = efis->ether_index;
uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
if ((unsigned int)fecidx >= 2)
hang();
setbits_be32(&immr->im_cpm.cp_cptr, mask);
}
static inline void fec_100Mbps(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
int fecidx = efis->ether_index;
uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
if ((unsigned int)fecidx >= 2)
hang();
clrbits_be32(&immr->im_cpm.cp_cptr, mask);
}
#endif
static inline void fec_full_duplex(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
fec_t __iomem *fecp =
(fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
clrbits_be32(&fecp->fec_r_cntrl, FEC_RCNTRL_DRT);
setbits_be32(&fecp->fec_x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */
}
static inline void fec_half_duplex(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
fec_t __iomem *fecp =
(fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
setbits_be32(&fecp->fec_r_cntrl, FEC_RCNTRL_DRT);
clrbits_be32(&fecp->fec_x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
}
static void fec_pin_init(int fecidx)
{
struct bd_info *bd = gd->bd;
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
/*
* Set MII speed to 2.5 MHz or slightly below.
*
* According to the MPC860T (Rev. D) Fast ethernet controller user
* manual (6.2.14),
* the MII management interface clock must be less than or equal
* to 2.5 MHz.
* This MDC frequency is equal to system clock / (2 * MII_SPEED).
* Then MII_SPEED = system_clock / 2 * 2,5 MHz.
*
* All MII configuration is done via FEC1 registers:
*/
out_be32(&immr->im_cpm.cp_fec1.fec_mii_speed,
((bd->bi_intfreq + 4999999) / 5000000) << 1);
#if defined(CONFIG_MPC885) && defined(WANT_MII)
/* use MDC for MII */
setbits_be16(&immr->im_ioport.iop_pdpar, 0x0080);
clrbits_be16(&immr->im_ioport.iop_pddir, 0x0080);
#endif
if (fecidx == 0) {
#if defined(CONFIG_ETHER_ON_FEC1)
#if defined(CONFIG_MPC885) /* MPC87x/88x have got 2 FECs and different pinout */
#if !defined(CONFIG_RMII)
setbits_be16(&immr->im_ioport.iop_papar, 0xf830);
setbits_be16(&immr->im_ioport.iop_padir, 0x0830);
clrbits_be16(&immr->im_ioport.iop_padir, 0xf000);
setbits_be32(&immr->im_cpm.cp_pbpar, 0x00001001);
clrbits_be32(&immr->im_cpm.cp_pbdir, 0x00001001);
setbits_be16(&immr->im_ioport.iop_pcpar, 0x000c);
clrbits_be16(&immr->im_ioport.iop_pcdir, 0x000c);
setbits_be32(&immr->im_cpm.cp_pepar, 0x00000003);
setbits_be32(&immr->im_cpm.cp_pedir, 0x00000003);
clrbits_be32(&immr->im_cpm.cp_peso, 0x00000003);
clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000100);
#else
#if !defined(CONFIG_FEC1_PHY_NORXERR)
setbits_be16(&immr->im_ioport.iop_papar, 0x1000);
clrbits_be16(&immr->im_ioport.iop_padir, 0x1000);
#endif
setbits_be16(&immr->im_ioport.iop_papar, 0xe810);
setbits_be16(&immr->im_ioport.iop_padir, 0x0810);
clrbits_be16(&immr->im_ioport.iop_padir, 0xe000);
setbits_be32(&immr->im_cpm.cp_pbpar, 0x00000001);
clrbits_be32(&immr->im_cpm.cp_pbdir, 0x00000001);
setbits_be32(&immr->im_cpm.cp_cptr, 0x00000100);
clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000050);
#endif /* !CONFIG_RMII */
#else
/*
* Configure all of port D for MII.
*/
out_be16(&immr->im_ioport.iop_pdpar, 0x1fff);
out_be16(&immr->im_ioport.iop_pddir, 0x1fff);
#if defined(CONFIG_TARGET_MCR3000)
out_be16(&immr->im_ioport.iop_papar, 0xBBFF);
out_be16(&immr->im_ioport.iop_padir, 0x04F0);
out_be16(&immr->im_ioport.iop_paodr, 0x0000);
out_be32(&immr->im_cpm.cp_pbpar, 0x000133FF);
out_be32(&immr->im_cpm.cp_pbdir, 0x0003BF0F);
out_be16(&immr->im_cpm.cp_pbodr, 0x0000);
out_be16(&immr->im_ioport.iop_pcpar, 0x0400);
out_be16(&immr->im_ioport.iop_pcdir, 0x0080);
out_be16(&immr->im_ioport.iop_pcso , 0x0D53);
out_be16(&immr->im_ioport.iop_pcint, 0x0000);
out_be16(&immr->im_ioport.iop_pdpar, 0x03FE);
out_be16(&immr->im_ioport.iop_pddir, 0x1C09);
setbits_be32(&immr->im_ioport.utmode, 0x80);
#endif
#endif
#endif /* CONFIG_ETHER_ON_FEC1 */
} else if (fecidx == 1) {
#if defined(CONFIG_ETHER_ON_FEC2)
#if defined(CONFIG_MPC885) /* MPC87x/88x have got 2 FECs and different pinout */
#if !defined(CONFIG_RMII)
setbits_be32(&immr->im_cpm.cp_pepar, 0x0003fffc);
setbits_be32(&immr->im_cpm.cp_pedir, 0x0003fffc);
clrbits_be32(&immr->im_cpm.cp_peso, 0x000087fc);
setbits_be32(&immr->im_cpm.cp_peso, 0x00037800);
clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000080);
#else
#if !defined(CONFIG_FEC2_PHY_NORXERR)
setbits_be32(&immr->im_cpm.cp_pepar, 0x00000010);
setbits_be32(&immr->im_cpm.cp_pedir, 0x00000010);
clrbits_be32(&immr->im_cpm.cp_peso, 0x00000010);
#endif
setbits_be32(&immr->im_cpm.cp_pepar, 0x00039620);
setbits_be32(&immr->im_cpm.cp_pedir, 0x00039620);
setbits_be32(&immr->im_cpm.cp_peso, 0x00031000);
clrbits_be32(&immr->im_cpm.cp_peso, 0x00008620);
setbits_be32(&immr->im_cpm.cp_cptr, 0x00000080);
clrbits_be32(&immr->im_cpm.cp_cptr, 0x00000028);
#endif /* CONFIG_RMII */
#endif /* CONFIG_MPC885 */
#endif /* CONFIG_ETHER_ON_FEC2 */
}
}
static int fec_reset(fec_t __iomem *fecp)
{
int i;
/* Whack a reset.
* A delay is required between a reset of the FEC block and
* initialization of other FEC registers because the reset takes
* some time to complete. If you don't delay, subsequent writes
* to FEC registers might get killed by the reset routine which is
* still in progress.
*/
out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
for (i = 0; (in_be32(&fecp->fec_ecntrl) & FEC_ECNTRL_RESET) &&
(i < FEC_RESET_DELAY); ++i)
udelay(1);
if (i == FEC_RESET_DELAY)
return -1;
return 0;
}
static int fec_init(struct eth_device *dev, struct bd_info *bd)
{
struct ether_fcc_info_s *efis = dev->priv;
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
fec_t __iomem *fecp =
(fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
int i;
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
/* the MII interface is connected to FEC1
* so for the miiphy_xxx function to work we must
* call mii_init since fec_halt messes the thing up
*/
if (efis->ether_index != 0)
__mii_init();
#endif
if (fec_reset(fecp) < 0)
printf("FEC_RESET_DELAY timeout\n");
/* We use strictly polling mode only
*/
out_be32(&fecp->fec_imask, 0);
/* Clear any pending interrupt
*/
out_be32(&fecp->fec_ievent, 0xffc0);
/* No need to set the IVEC register */
/* Set station address
*/
#define ea dev->enetaddr
out_be32(&fecp->fec_addr_low, (ea[0] << 24) | (ea[1] << 16) |
(ea[2] << 8) | ea[3]);
out_be16(&fecp->fec_addr_high, (ea[4] << 8) | ea[5]);
#undef ea
#if defined(CONFIG_CMD_CDP)
/*
* Turn on multicast address hash table
*/
out_be32(&fecp->fec_hash_table_high, 0xffffffff);
out_be32(&fecp->fec_hash_table_low, 0xffffffff);
#else
/* Clear multicast address hash table
*/
out_be32(&fecp->fec_hash_table_high, 0);
out_be32(&fecp->fec_hash_table_low, 0);
#endif
/* Set maximum receive buffer size.
*/
out_be32(&fecp->fec_r_buff_size, PKT_MAXBLR_SIZE);
/* Set maximum frame length
*/
out_be32(&fecp->fec_r_hash, PKT_MAXBUF_SIZE);
/*
* Setup Buffers and Buffer Descriptors
*/
rxIdx = 0;
txIdx = 0;
if (!rtx)
rtx = (struct common_buf_desc __iomem *)
(immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
/*
* Setup Receiver Buffer Descriptors (13.14.24.18)
* Settings:
* Empty, Wrap
*/
for (i = 0; i < PKTBUFSRX; i++) {
out_be16(&rtx->rxbd[i].cbd_sc, BD_ENET_RX_EMPTY);
out_be16(&rtx->rxbd[i].cbd_datlen, 0); /* Reset */
out_be32(&rtx->rxbd[i].cbd_bufaddr, (uint)net_rx_packets[i]);
}
setbits_be16(&rtx->rxbd[PKTBUFSRX - 1].cbd_sc, BD_ENET_RX_WRAP);
/*
* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
* Settings:
* Last, Tx CRC
*/
for (i = 0; i < TX_BUF_CNT; i++) {
out_be16(&rtx->txbd[i].cbd_sc, BD_ENET_TX_LAST | BD_ENET_TX_TC);
out_be16(&rtx->txbd[i].cbd_datlen, 0); /* Reset */
out_be32(&rtx->txbd[i].cbd_bufaddr, (uint)txbuf);
}
setbits_be16(&rtx->txbd[TX_BUF_CNT - 1].cbd_sc, BD_ENET_TX_WRAP);
/* Set receive and transmit descriptor base
*/
out_be32(&fecp->fec_r_des_start, (__force unsigned int)rtx->rxbd);
out_be32(&fecp->fec_x_des_start, (__force unsigned int)rtx->txbd);
/* Enable MII mode
*/
/* Half duplex mode */
out_be32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT);
out_be32(&fecp->fec_x_cntrl, 0);
/* Enable big endian and don't care about SDMA FC.
*/
out_be32(&fecp->fec_fun_code, 0x78000000);
/*
* Setup the pin configuration of the FEC
*/
fec_pin_init(efis->ether_index);
rxIdx = 0;
txIdx = 0;
/*
* Now enable the transmit and receive processing
*/
out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
if (efis->phy_addr == -1) {
#ifdef CONFIG_SYS_DISCOVER_PHY
/*
* wait for the PHY to wake up after reset
*/
efis->actual_phy_addr = mii_discover_phy(dev);
if (efis->actual_phy_addr == -1) {
printf("Unable to discover phy!\n");
return -1;
}
#else
efis->actual_phy_addr = -1;
#endif
} else {
efis->actual_phy_addr = efis->phy_addr;
}
#if defined(CONFIG_MII) && defined(CONFIG_RMII)
/*
* adapt the RMII speed to the speed of the phy
*/
if (miiphy_speed(dev->name, efis->actual_phy_addr) == _100BASET)
fec_100Mbps(dev);
else
fec_10Mbps(dev);
#endif
#if defined(CONFIG_MII)
/*
* adapt to the half/full speed settings
*/
if (miiphy_duplex(dev->name, efis->actual_phy_addr) == FULL)
fec_full_duplex(dev);
else
fec_half_duplex(dev);
#endif
/* And last, try to fill Rx Buffer Descriptors */
/* Descriptor polling active */
out_be32(&fecp->fec_r_des_active, 0x01000000);
efis->initialized = 1;
return 0;
}
static void fec_halt(struct eth_device *dev)
{
struct ether_fcc_info_s *efis = dev->priv;
fec_t __iomem *fecp =
(fec_t __iomem *)(CONFIG_SYS_IMMR + efis->fecp_offset);
int i;
/* avoid halt if initialized; mii gets stuck otherwise */
if (!efis->initialized)
return;
/* Whack a reset.
* A delay is required between a reset of the FEC block and
* initialization of other FEC registers because the reset takes
* some time to complete. If you don't delay, subsequent writes
* to FEC registers might get killed by the reset routine which is
* still in progress.
*/
out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
for (i = 0; (in_be32(&fecp->fec_ecntrl) & FEC_ECNTRL_RESET) &&
(i < FEC_RESET_DELAY); ++i)
udelay(1);
if (i == FEC_RESET_DELAY) {
printf("FEC_RESET_DELAY timeout\n");
return;
}
efis->initialized = 0;
}
#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
/* Make MII read/write commands for the FEC.
*/
#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
(REG & 0x1f) << 18))
#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
(REG & 0x1f) << 18) | \
(VAL & 0xffff))
/* Interrupt events/masks.
*/
#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
/* send command to phy using mii, wait for result */
static uint
mii_send(uint mii_cmd)
{
uint mii_reply;
fec_t __iomem *ep;
int cnt;
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
ep = &immr->im_cpm.cp_fec;
out_be32(&ep->fec_mii_data, mii_cmd); /* command to phy */
/* wait for mii complete */
cnt = 0;
while (!(in_be32(&ep->fec_ievent) & FEC_ENET_MII)) {
if (++cnt > 1000) {
printf("mii_send STUCK!\n");
break;
}
}
mii_reply = in_be32(&ep->fec_mii_data); /* result from phy */
out_be32(&ep->fec_ievent, FEC_ENET_MII); /* clear MII complete */
return mii_reply & 0xffff; /* data read from phy */
}
#endif
#if defined(CONFIG_SYS_DISCOVER_PHY)
static int mii_discover_phy(struct eth_device *dev)
{
#define MAX_PHY_PASSES 11
uint phyno;
int pass;
uint phytype;
int phyaddr;
phyaddr = -1; /* didn't find a PHY yet */
for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
if (pass > 1) {
/* PHY may need more time to recover from reset.
* The LXT970 needs 50ms typical, no maximum is
* specified, so wait 10ms before try again.
* With 11 passes this gives it 100ms to wake up.
*/
udelay(10000); /* wait 10ms */
}
for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
phytype = mii_send(mk_mii_read(phyno, MII_PHYSID2));
if (phytype != 0xffff) {
phyaddr = phyno;
phytype |= mii_send(mk_mii_read(phyno,
MII_PHYSID1)) << 16;
}
}
}
if (phyaddr < 0)
printf("No PHY device found.\n");
return phyaddr;
}
#endif /* CONFIG_SYS_DISCOVER_PHY */
#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
/****************************************************************************
* mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
* This function is a subset of eth_init
****************************************************************************
*/
static void __mii_init(void)
{
immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
fec_t __iomem *fecp = &immr->im_cpm.cp_fec;
if (fec_reset(fecp) < 0)
printf("FEC_RESET_DELAY timeout\n");
/* We use strictly polling mode only
*/
out_be32(&fecp->fec_imask, 0);
/* Clear any pending interrupt
*/
out_be32(&fecp->fec_ievent, 0xffc0);
/* Now enable the transmit and receive processing
*/
out_be32(&fecp->fec_ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
}
void mii_init(void)
{
int i;
__mii_init();
/* Setup the pin configuration of the FEC(s)
*/
for (i = 0; i < ARRAY_SIZE(ether_fcc_info); i++)
fec_pin_init(ether_fcc_info[i].ether_index);
}
/*****************************************************************************
* Read and write a MII PHY register, routines used by MII Utilities
*
* FIXME: These routines are expected to return 0 on success, but mii_send
* does _not_ return an error code. Maybe 0xFFFF means error, i.e.
* no PHY connected...
* For now always return 0.
* FIXME: These routines only work after calling eth_init() at least once!
* Otherwise they hang in mii_send() !!! Sorry!
*****************************************************************************/
int fec8xx_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
{
unsigned short value = 0;
short rdreg; /* register working value */
rdreg = mii_send(mk_mii_read(addr, reg));
value = rdreg;
return value;
}
int fec8xx_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
u16 value)
{
(void)mii_send(mk_mii_write(addr, reg, value));
return 0;
}
#endif
Reference in a new issue View git blame Copy permalink