u-boot/arch/arm/cpu/armv7/sunxi/usb_phy.c
Hans de Goede c9f8947e66 sunxi: usb-phy: Never power off the usb ports
USB devices are not really designed to get the power bounced off and on
at them. Esp. USB powered harddisks do not like this.

Currently we power off the USB ports both on a "usb reset" and when
booting the kernel, causing the usb-power to bounce off and then back
on again.

This patch removes the powering off calls, fixing the undesirable power
bouncing.

Note this requires some special handling for the OTG port:
1) We must skip the external vbus check if we've already enabled our own
vbus to avoid false positives
2) If on an usb reset we no longer detect that the id-pin is grounded, turn
off vbus as that means an external vbus may be present now

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-08 16:26:19 +02:00

343 lines
7.2 KiB
C

/*
* Sunxi usb-phy code
*
* Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
*
* Based on code from
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/usb_phy.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <errno.h>
#ifdef CONFIG_AXP152_POWER
#include <axp152.h>
#endif
#ifdef CONFIG_AXP209_POWER
#include <axp209.h>
#endif
#ifdef CONFIG_AXP221_POWER
#include <axp221.h>
#endif
#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
#ifdef CONFIG_MACH_SUN8I_A33
#define SUNXI_USB_CSR 0x410
#else
#define SUNXI_USB_CSR 0x404
#endif
#define SUNXI_USB_PASSBY_EN 1
#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
static struct sunxi_usb_phy {
int usb_rst_mask;
int gpio_vbus;
int gpio_vbus_det;
int gpio_id_det;
int id;
int init_count;
int power_on_count;
} sunxi_usb_phy[] = {
{
.usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
.id = 0,
},
{
.usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
.id = 1,
},
#if CONFIG_SUNXI_USB_PHYS >= 3
{
.usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
.id = 2,
}
#endif
};
static int get_vbus_gpio(int index)
{
switch (index) {
case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
}
return -EINVAL;
}
static int get_vbus_detect_gpio(int index)
{
switch (index) {
case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
}
return -EINVAL;
}
static int get_id_detect_gpio(int index)
{
switch (index) {
case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET);
}
return -EINVAL;
}
static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
int data, int len)
{
int j = 0, usbc_bit = 0;
void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
#ifdef CONFIG_MACH_SUN8I_A33
/* CSR needs to be explicitly initialized to 0 on A33 */
writel(0, dest);
#endif
usbc_bit = 1 << (phy->id * 2);
for (j = 0; j < len; j++) {
/* set the bit address to be written */
clrbits_le32(dest, 0xff << 8);
setbits_le32(dest, (addr + j) << 8);
clrbits_le32(dest, usbc_bit);
/* set data bit */
if (data & 0x1)
setbits_le32(dest, 1 << 7);
else
clrbits_le32(dest, 1 << 7);
setbits_le32(dest, usbc_bit);
clrbits_le32(dest, usbc_bit);
data >>= 1;
}
}
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
/* The following comments are machine
* translated from Chinese, you have been warned!
*/
/* Regulation 45 ohms */
if (phy->id == 0)
usb_phy_write(phy, 0x0c, 0x01, 1);
/* adjust PHY's magnitude and rate */
usb_phy_write(phy, 0x20, 0x14, 5);
/* threshold adjustment disconnect */
#if defined CONFIG_MACH_SUN5I || defined CONFIG_MACH_SUN7I
usb_phy_write(phy, 0x2a, 2, 2);
#else
usb_phy_write(phy, 0x2a, 3, 2);
#endif
return;
}
static void sunxi_usb_phy_passby(int index, int enable)
{
unsigned long bits = 0;
void *addr;
if (index == 1)
addr = (void *)SUNXI_USB1_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
else
addr = (void *)SUNXI_USB2_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
bits = SUNXI_EHCI_AHB_ICHR8_EN |
SUNXI_EHCI_AHB_INCR4_BURST_EN |
SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
SUNXI_EHCI_ULPI_BYPASS_EN;
if (enable)
setbits_le32(addr, bits);
else
clrbits_le32(addr, bits);
return;
}
void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
}
void sunxi_usb_phy_init(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
phy->init_count++;
if (phy->init_count != 1)
return;
setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
sunxi_usb_phy_config(phy);
if (phy->id != 0)
sunxi_usb_phy_passby(index, SUNXI_USB_PASSBY_EN);
}
void sunxi_usb_phy_exit(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
phy->init_count--;
if (phy->init_count != 0)
return;
if (phy->id != 0)
sunxi_usb_phy_passby(index, !SUNXI_USB_PASSBY_EN);
clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
}
void sunxi_usb_phy_power_on(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
phy->power_on_count++;
if (phy->power_on_count != 1)
return;
if (phy->gpio_vbus >= 0)
gpio_set_value(phy->gpio_vbus, 1);
}
void sunxi_usb_phy_power_off(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
phy->power_on_count--;
if (phy->power_on_count != 0)
return;
if (phy->gpio_vbus >= 0)
gpio_set_value(phy->gpio_vbus, 0);
}
int sunxi_usb_phy_power_is_on(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
return phy->power_on_count > 0;
}
int sunxi_usb_phy_vbus_detect(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
int err, retries = 3;
if (phy->gpio_vbus_det < 0)
return phy->gpio_vbus_det;
err = gpio_get_value(phy->gpio_vbus_det);
/*
* Vbus may have been provided by the board and just been turned of
* some milliseconds ago on reset, what we're measuring then is a
* residual charge on Vbus, sleep a bit and try again.
*/
while (err > 0 && retries--) {
mdelay(100);
err = gpio_get_value(phy->gpio_vbus_det);
}
return err;
}
int sunxi_usb_phy_id_detect(int index)
{
struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
if (phy->gpio_id_det < 0)
return phy->gpio_id_det;
return gpio_get_value(phy->gpio_id_det);
}
int sunxi_usb_phy_probe(void)
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_usb_phy *phy;
int i, ret = 0;
for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
phy = &sunxi_usb_phy[i];
phy->gpio_vbus = get_vbus_gpio(i);
if (phy->gpio_vbus >= 0) {
ret = gpio_request(phy->gpio_vbus, "usb_vbus");
if (ret)
return ret;
ret = gpio_direction_output(phy->gpio_vbus, 0);
if (ret)
return ret;
}
phy->gpio_vbus_det = get_vbus_detect_gpio(i);
if (phy->gpio_vbus_det >= 0) {
ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
if (ret)
return ret;
ret = gpio_direction_input(phy->gpio_vbus_det);
if (ret)
return ret;
}
phy->gpio_id_det = get_id_detect_gpio(i);
if (phy->gpio_id_det >= 0) {
ret = gpio_request(phy->gpio_id_det, "usb_id_det");
if (ret)
return ret;
ret = gpio_direction_input(phy->gpio_id_det);
if (ret)
return ret;
sunxi_gpio_set_pull(phy->gpio_id_det,
SUNXI_GPIO_PULL_UP);
}
}
setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
return 0;
}
int sunxi_usb_phy_remove(void)
{
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_usb_phy *phy;
int i;
clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
phy = &sunxi_usb_phy[i];
if (phy->gpio_vbus >= 0)
gpio_free(phy->gpio_vbus);
if (phy->gpio_vbus_det >= 0)
gpio_free(phy->gpio_vbus_det);
if (phy->gpio_id_det >= 0)
gpio_free(phy->gpio_id_det);
}
return 0;
}