mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 14:40:41 +00:00
45dbb4dd23
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
341 lines
13 KiB
ReStructuredText
341 lines
13 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
Compiled-in Device Tree / Platform Data
|
|
=======================================
|
|
|
|
|
|
Introduction
|
|
------------
|
|
|
|
Device tree is the standard configuration method in U-Boot. It is used to
|
|
define what devices are in the system and provide configuration information
|
|
to these devices.
|
|
|
|
The overhead of adding device tree access to U-Boot is fairly modest,
|
|
approximately 3KB on Thumb 2 (plus the size of the DT itself). This means
|
|
that in most cases it is best to use device tree for configuration.
|
|
|
|
However there are some very constrained environments where U-Boot needs to
|
|
work. These include SPL with severe memory limitations. For example, some
|
|
SoCs require a 16KB SPL image which must include a full MMC stack. In this
|
|
case the overhead of device tree access may be too great.
|
|
|
|
It is possible to create platform data manually by defining C structures
|
|
for it, and reference that data in a U_BOOT_DEVICE() declaration. This
|
|
bypasses the use of device tree completely, effectively creating a parallel
|
|
configuration mechanism. But it is an available option for SPL.
|
|
|
|
As an alternative, a new 'of-platdata' feature is provided. This converts the
|
|
device tree contents into C code which can be compiled into the SPL binary.
|
|
This saves the 3KB of code overhead and perhaps a few hundred more bytes due
|
|
to more efficient storage of the data.
|
|
|
|
Note: Quite a bit of thought has gone into the design of this feature.
|
|
However it still has many rough edges and comments and suggestions are
|
|
strongly encouraged! Quite possibly there is a much better approach.
|
|
|
|
|
|
Caveats
|
|
-------
|
|
|
|
There are many problems with this features. It should only be used when
|
|
strictly necessary. Notable problems include:
|
|
|
|
- Device tree does not describe data types. But the C code must define a
|
|
type for each property. These are guessed using heuristics which
|
|
are wrong in several fairly common cases. For example an 8-byte value
|
|
is considered to be a 2-item integer array, and is byte-swapped. A
|
|
boolean value that is not present means 'false', but cannot be
|
|
included in the structures since there is generally no mention of it
|
|
in the device tree file.
|
|
|
|
- Naming of nodes and properties is automatic. This means that they follow
|
|
the naming in the device tree, which may result in C identifiers that
|
|
look a bit strange.
|
|
|
|
- It is not possible to find a value given a property name. Code must use
|
|
the associated C member variable directly in the code. This makes
|
|
the code less robust in the face of device-tree changes. It also
|
|
makes it very unlikely that your driver code will be useful for more
|
|
than one SoC. Even if the code is common, each SoC will end up with
|
|
a different C struct name, and a likely a different format for the
|
|
platform data.
|
|
|
|
- The platform data is provided to drivers as a C structure. The driver
|
|
must use the same structure to access the data. Since a driver
|
|
normally also supports device tree it must use #ifdef to separate
|
|
out this code, since the structures are only available in SPL.
|
|
|
|
- Correct relations between nodes are not implemented. This means that
|
|
parent/child relations (like bus device iteration) do not work yet.
|
|
Some phandles (those that are recognised as such) are converted into
|
|
a pointer to platform data. This pointer can potentially be used to
|
|
access the referenced device (by searching for the pointer value).
|
|
This feature is not yet implemented, however.
|
|
|
|
|
|
How it works
|
|
------------
|
|
|
|
The feature is enabled by CONFIG OF_PLATDATA. This is only available in
|
|
SPL/TPL and should be tested with:
|
|
|
|
.. code-block:: c
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
|
|
A new tool called 'dtoc' converts a device tree file either into a set of
|
|
struct declarations, one for each compatible node, and a set of
|
|
U_BOOT_DEVICE() declarations along with the actual platform data for each
|
|
device. As an example, consider this MMC node:
|
|
|
|
.. code-block:: none
|
|
|
|
sdmmc: dwmmc@ff0c0000 {
|
|
compatible = "rockchip,rk3288-dw-mshc";
|
|
clock-freq-min-max = <400000 150000000>;
|
|
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
|
|
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
|
|
fifo-depth = <0x100>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xff0c0000 0x4000>;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
card-detect-delay = <200>;
|
|
disable-wp;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
|
|
vmmc-supply = <&vcc_sd>;
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
|
|
Some of these properties are dropped by U-Boot under control of the
|
|
CONFIG_OF_SPL_REMOVE_PROPS option. The rest are processed. This will produce
|
|
the following C struct declaration:
|
|
|
|
.. code-block:: c
|
|
|
|
struct dtd_rockchip_rk3288_dw_mshc {
|
|
fdt32_t bus_width;
|
|
bool cap_mmc_highspeed;
|
|
bool cap_sd_highspeed;
|
|
fdt32_t card_detect_delay;
|
|
fdt32_t clock_freq_min_max[2];
|
|
struct phandle_1_arg clocks[4];
|
|
bool disable_wp;
|
|
fdt32_t fifo_depth;
|
|
fdt32_t interrupts[3];
|
|
fdt32_t num_slots;
|
|
fdt32_t reg[2];
|
|
fdt32_t vmmc_supply;
|
|
};
|
|
|
|
and the following device declaration:
|
|
|
|
.. code-block:: c
|
|
|
|
static struct dtd_rockchip_rk3288_dw_mshc dtv_dwmmc_at_ff0c0000 = {
|
|
.fifo_depth = 0x100,
|
|
.cap_sd_highspeed = true,
|
|
.interrupts = {0x0, 0x20, 0x4},
|
|
.clock_freq_min_max = {0x61a80, 0x8f0d180},
|
|
.vmmc_supply = 0xb,
|
|
.num_slots = 0x1,
|
|
.clocks = {{&dtv_clock_controller_at_ff760000, 456},
|
|
{&dtv_clock_controller_at_ff760000, 68},
|
|
{&dtv_clock_controller_at_ff760000, 114},
|
|
{&dtv_clock_controller_at_ff760000, 118}},
|
|
.cap_mmc_highspeed = true,
|
|
.disable_wp = true,
|
|
.bus_width = 0x4,
|
|
.u_boot_dm_pre_reloc = true,
|
|
.reg = {0xff0c0000, 0x4000},
|
|
.card_detect_delay = 0xc8,
|
|
};
|
|
|
|
U_BOOT_DEVICE(dwmmc_at_ff0c0000) = {
|
|
.name = "rockchip_rk3288_dw_mshc",
|
|
.platdata = &dtv_dwmmc_at_ff0c0000,
|
|
.platdata_size = sizeof(dtv_dwmmc_at_ff0c0000),
|
|
};
|
|
|
|
The device is then instantiated at run-time and the platform data can be
|
|
accessed using:
|
|
|
|
.. code-block:: c
|
|
|
|
struct udevice *dev;
|
|
struct dtd_rockchip_rk3288_dw_mshc *plat = dev_get_platdata(dev);
|
|
|
|
This avoids the code overhead of converting the device tree data to
|
|
platform data in the driver. The ofdata_to_platdata() method should
|
|
therefore do nothing in such a driver.
|
|
|
|
Note that for the platform data to be matched with a driver, the 'name'
|
|
property of the U_BOOT_DEVICE() declaration has to match a driver declared
|
|
via U_BOOT_DRIVER(). This effectively means that a U_BOOT_DRIVER() with a
|
|
'name' corresponding to the devicetree 'compatible' string (after converting
|
|
it to a valid name for C) is needed, so a dedicated driver is required for
|
|
each 'compatible' string.
|
|
|
|
Where a node has multiple compatible strings, a #define is used to make them
|
|
equivalent, e.g.:
|
|
|
|
.. code-block:: c
|
|
|
|
#define dtd_rockchip_rk3299_dw_mshc dtd_rockchip_rk3288_dw_mshc
|
|
|
|
|
|
Converting of-platdata to a useful form
|
|
---------------------------------------
|
|
|
|
Of course it would be possible to use the of-platdata directly in your driver
|
|
whenever configuration information is required. However this means that the
|
|
driver will not be able to support device tree, since the of-platdata
|
|
structure is not available when device tree is used. It would make no sense
|
|
to use this structure if device tree were available, since the structure has
|
|
all the limitations metioned in caveats above.
|
|
|
|
Therefore it is recommended that the of-platdata structure should be used
|
|
only in the probe() method of your driver. It cannot be used in the
|
|
ofdata_to_platdata() method since this is not called when platform data is
|
|
already present.
|
|
|
|
|
|
How to structure your driver
|
|
----------------------------
|
|
|
|
Drivers should always support device tree as an option. The of-platdata
|
|
feature is intended as a add-on to existing drivers.
|
|
|
|
Your driver should convert the platdata struct in its probe() method. The
|
|
existing device tree decoding logic should be kept in the
|
|
ofdata_to_platdata() method and wrapped with #if.
|
|
|
|
For example:
|
|
|
|
.. code-block:: c
|
|
|
|
#include <dt-structs.h>
|
|
|
|
struct mmc_platdata {
|
|
#if CONFIG_IS_ENABLED(SPL_OF_PLATDATA)
|
|
/* Put this first since driver model will copy the data here */
|
|
struct dtd_mmc dtplat;
|
|
#endif
|
|
/*
|
|
* Other fields can go here, to be filled in by decoding from
|
|
* the device tree (or the C structures when of-platdata is used).
|
|
*/
|
|
int fifo_depth;
|
|
};
|
|
|
|
static int mmc_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
#if !CONFIG_IS_ENABLED(SPL_OF_PLATDATA)
|
|
/* Decode the device tree data */
|
|
struct mmc_platdata *plat = dev_get_platdata(dev);
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
|
|
plat->fifo_depth = fdtdec_get_int(blob, node, "fifo-depth", 0);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_probe(struct udevice *dev)
|
|
{
|
|
struct mmc_platdata *plat = dev_get_platdata(dev);
|
|
|
|
#if CONFIG_IS_ENABLED(SPL_OF_PLATDATA)
|
|
/* Decode the of-platdata from the C structures */
|
|
struct dtd_mmc *dtplat = &plat->dtplat;
|
|
|
|
plat->fifo_depth = dtplat->fifo_depth;
|
|
#endif
|
|
/* Set up the device from the plat data */
|
|
writel(plat->fifo_depth, ...)
|
|
}
|
|
|
|
static const struct udevice_id mmc_ids[] = {
|
|
{ .compatible = "vendor,mmc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mmc_drv) = {
|
|
.name = "mmc",
|
|
.id = UCLASS_MMC,
|
|
.of_match = mmc_ids,
|
|
.ofdata_to_platdata = mmc_ofdata_to_platdata,
|
|
.probe = mmc_probe,
|
|
.priv_auto_alloc_size = sizeof(struct mmc_priv),
|
|
.platdata_auto_alloc_size = sizeof(struct mmc_platdata),
|
|
};
|
|
|
|
|
|
In the case where SPL_OF_PLATDATA is enabled, platdata_auto_alloc_size is
|
|
still used to allocate space for the platform data. This is different from
|
|
the normal behaviour and is triggered by the use of of-platdata (strictly
|
|
speaking it is a non-zero platdata_size which triggers this).
|
|
|
|
The of-platdata struct contents is copied from the C structure data to the
|
|
start of the newly allocated area. In the case where device tree is used,
|
|
the platform data is allocated, and starts zeroed. In this case the
|
|
ofdata_to_platdata() method should still set up the platform data (and the
|
|
of-platdata struct will not be present).
|
|
|
|
SPL must use either of-platdata or device tree. Drivers cannot use both at
|
|
the same time, but they must support device tree. Supporting of-platdata is
|
|
optional.
|
|
|
|
The device tree becomes in accessible when CONFIG_SPL_OF_PLATDATA is enabled,
|
|
since the device-tree access code is not compiled in. A corollary is that
|
|
a board can only move to using of-platdata if all the drivers it uses support
|
|
it. There would be little point in having some drivers require the device
|
|
tree data, since then libfdt would still be needed for those drivers and
|
|
there would be no code-size benefit.
|
|
|
|
Internals
|
|
---------
|
|
|
|
The dt-structs.h file includes the generated file
|
|
(include/generated//dt-structs.h) if CONFIG_SPL_OF_PLATDATA is enabled.
|
|
Otherwise (such as in U-Boot proper) these structs are not available. This
|
|
prevents them being used inadvertently. All usage must be bracketed with
|
|
#if CONFIG_IS_ENABLED(SPL_OF_PLATDATA).
|
|
|
|
The dt-platdata.c file contains the device declarations and is is built in
|
|
spl/dt-platdata.c.
|
|
|
|
The beginnings of a libfdt Python module are provided. So far this only
|
|
implements a subset of the features.
|
|
|
|
The 'swig' tool is needed to build the libfdt Python module. If this is not
|
|
found then the Python model is not used and a fallback is used instead, which
|
|
makes use of fdtget.
|
|
|
|
|
|
Credits
|
|
-------
|
|
|
|
This is an implementation of an idea by Tom Rini <trini@konsulko.com>.
|
|
|
|
|
|
Future work
|
|
-----------
|
|
- Consider programmatically reading binding files instead of device tree
|
|
contents
|
|
- Complete the phandle feature
|
|
- Move to using a full Python libfdt module
|
|
|
|
|
|
.. Simon Glass <sjg@chromium.org>
|
|
.. Google, Inc
|
|
.. 6/6/16
|
|
.. Updated Independence Day 2016
|