mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
2b758cad8d
The following warning was produced, fix it: mcfmii.c: In function 'mcffec_miiphy_write': mcfmii.c:318:8: warning: variable 'rdreg' set but not used [-Wunused-but-set-variable] Signed-off-by: Marek Vasut <marex@denx.de> Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com> Cc: Jason Jin <jason.jin@freescale.com>
331 lines
8.1 KiB
C
331 lines
8.1 KiB
C
/*
|
|
* Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
|
|
#ifdef CONFIG_MCF547x_8x
|
|
#include <asm/fsl_mcdmafec.h>
|
|
#else
|
|
#include <asm/fec.h>
|
|
#endif
|
|
#include <asm/immap.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
#undef MII_DEBUG
|
|
#undef ET_DEBUG
|
|
|
|
/*extern int fecpin_setclear(struct eth_device *dev, int setclear);*/
|
|
|
|
#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
|
|
#include <miiphy.h>
|
|
|
|
/* Make MII read/write commands for the FEC. */
|
|
#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
|
|
(REG & 0x1f) << 18))
|
|
#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
|
|
(REG & 0x1f) << 18) | (VAL & 0xffff))
|
|
|
|
#ifndef CONFIG_SYS_UNSPEC_PHYID
|
|
# define CONFIG_SYS_UNSPEC_PHYID 0
|
|
#endif
|
|
#ifndef CONFIG_SYS_UNSPEC_STRID
|
|
# define CONFIG_SYS_UNSPEC_STRID 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_MCF547x_8x
|
|
typedef struct fec_info_dma FEC_INFO_T;
|
|
#define FEC_T fecdma_t
|
|
#else
|
|
typedef struct fec_info_s FEC_INFO_T;
|
|
#define FEC_T fec_t
|
|
#endif
|
|
|
|
typedef struct phy_info_struct {
|
|
u32 phyid;
|
|
char *strid;
|
|
} phy_info_t;
|
|
|
|
phy_info_t phyinfo[] = {
|
|
{0x0022561B, "AMD79C784VC"}, /* AMD 79C784VC */
|
|
{0x00406322, "BCM5222"}, /* Broadcom 5222 */
|
|
{0x02a80150, "Intel82555"}, /* Intel 82555 */
|
|
{0x0016f870, "LSI80225"}, /* LSI 80225 */
|
|
{0x0016f880, "LSI80225/B"}, /* LSI 80225/B */
|
|
{0x78100000, "LXT970"}, /* LXT970 */
|
|
{0x001378e0, "LXT971"}, /* LXT971 and 972 */
|
|
{0x00221619, "KS8721BL"}, /* Micrel KS8721BL/SL */
|
|
{0x00221512, "KSZ8041NL"}, /* Micrel KSZ8041NL */
|
|
{0x20005CE1, "N83640"}, /* National 83640 */
|
|
{0x20005C90, "N83848"}, /* National 83848 */
|
|
{0x20005CA2, "N83849"}, /* National 83849 */
|
|
{0x01814400, "QS6612"}, /* QS6612 */
|
|
#if defined(CONFIG_SYS_UNSPEC_PHYID) && defined(CONFIG_SYS_UNSPEC_STRID)
|
|
{CONFIG_SYS_UNSPEC_PHYID, CONFIG_SYS_UNSPEC_STRID},
|
|
#endif
|
|
{0, 0}
|
|
};
|
|
|
|
/*
|
|
* mii_init -- Initialize the MII for MII command without ethernet
|
|
* This function is a subset of eth_init
|
|
*/
|
|
void mii_reset(FEC_INFO_T *info)
|
|
{
|
|
volatile FEC_T *fecp = (FEC_T *) (info->miibase);
|
|
int i;
|
|
|
|
fecp->ecr = FEC_ECR_RESET;
|
|
|
|
for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
|
|
udelay(1);
|
|
}
|
|
if (i == FEC_RESET_DELAY)
|
|
printf("FEC_RESET_DELAY timeout\n");
|
|
}
|
|
|
|
/* send command to phy using mii, wait for result */
|
|
uint mii_send(uint mii_cmd)
|
|
{
|
|
FEC_INFO_T *info;
|
|
volatile FEC_T *ep;
|
|
struct eth_device *dev;
|
|
uint mii_reply;
|
|
int j = 0;
|
|
|
|
/* retrieve from register structure */
|
|
dev = eth_get_dev();
|
|
info = dev->priv;
|
|
|
|
ep = (FEC_T *) info->miibase;
|
|
|
|
ep->mmfr = mii_cmd; /* command to phy */
|
|
|
|
/* wait for mii complete */
|
|
while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
|
|
udelay(1);
|
|
j++;
|
|
}
|
|
if (j >= MCFFEC_TOUT_LOOP) {
|
|
printf("MII not complete\n");
|
|
return -1;
|
|
}
|
|
|
|
mii_reply = ep->mmfr; /* result from phy */
|
|
ep->eir = FEC_EIR_MII; /* clear MII complete */
|
|
#ifdef ET_DEBUG
|
|
printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
|
|
__FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
|
|
#endif
|
|
|
|
return (mii_reply & 0xffff); /* data read from phy */
|
|
}
|
|
#endif /* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */
|
|
|
|
#if defined(CONFIG_SYS_DISCOVER_PHY)
|
|
int mii_discover_phy(struct eth_device *dev)
|
|
{
|
|
#define MAX_PHY_PASSES 11
|
|
FEC_INFO_T *info = dev->priv;
|
|
int phyaddr, pass;
|
|
uint phyno, phytype;
|
|
int i, found = 0;
|
|
|
|
if (info->phyname_init)
|
|
return info->phy_addr;
|
|
|
|
phyaddr = -1; /* didn't find a PHY yet */
|
|
for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
|
|
if (pass > 1) {
|
|
/* PHY may need more time to recover from reset.
|
|
* The LXT970 needs 50ms typical, no maximum is
|
|
* specified, so wait 10ms before try again.
|
|
* With 11 passes this gives it 100ms to wake up.
|
|
*/
|
|
udelay(10000); /* wait 10ms */
|
|
}
|
|
|
|
for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
|
|
|
|
phytype = mii_send(mk_mii_read(phyno, MII_PHYSID1));
|
|
#ifdef ET_DEBUG
|
|
printf("PHY type 0x%x pass %d type\n", phytype, pass);
|
|
#endif
|
|
if (phytype == 0xffff)
|
|
continue;
|
|
phyaddr = phyno;
|
|
phytype <<= 16;
|
|
phytype |=
|
|
mii_send(mk_mii_read(phyno, MII_PHYSID2));
|
|
|
|
#ifdef ET_DEBUG
|
|
printf("PHY @ 0x%x pass %d\n", phyno, pass);
|
|
#endif
|
|
|
|
for (i = 0; (i < (sizeof(phyinfo) / sizeof(phy_info_t)))
|
|
&& (phyinfo[i].phyid != 0); i++) {
|
|
if (phyinfo[i].phyid == phytype) {
|
|
#ifdef ET_DEBUG
|
|
printf("phyid %x - %s\n",
|
|
phyinfo[i].phyid,
|
|
phyinfo[i].strid);
|
|
#endif
|
|
strcpy(info->phy_name, phyinfo[i].strid);
|
|
info->phyname_init = 1;
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found) {
|
|
#ifdef ET_DEBUG
|
|
printf("0x%08x\n", phytype);
|
|
#endif
|
|
strcpy(info->phy_name, "unknown");
|
|
info->phyname_init = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (phyaddr < 0)
|
|
printf("No PHY device found.\n");
|
|
|
|
return phyaddr;
|
|
}
|
|
#endif /* CONFIG_SYS_DISCOVER_PHY */
|
|
|
|
void mii_init(void) __attribute__((weak,alias("__mii_init")));
|
|
|
|
void __mii_init(void)
|
|
{
|
|
FEC_INFO_T *info;
|
|
volatile FEC_T *fecp;
|
|
struct eth_device *dev;
|
|
int miispd = 0, i = 0;
|
|
u16 status = 0;
|
|
u16 linkgood = 0;
|
|
|
|
/* retrieve from register structure */
|
|
dev = eth_get_dev();
|
|
info = dev->priv;
|
|
|
|
fecp = (FEC_T *) info->miibase;
|
|
|
|
fecpin_setclear(dev, 1);
|
|
|
|
mii_reset(info);
|
|
|
|
/* We use strictly polling mode only */
|
|
fecp->eimr = 0;
|
|
|
|
/* Clear any pending interrupt */
|
|
fecp->eir = 0xffffffff;
|
|
|
|
/* Set MII speed */
|
|
miispd = (gd->bus_clk / 1000000) / 5;
|
|
fecp->mscr = miispd << 1;
|
|
|
|
info->phy_addr = mii_discover_phy(dev);
|
|
|
|
while (i < MCFFEC_TOUT_LOOP) {
|
|
status = 0;
|
|
i++;
|
|
/* Read PHY control register */
|
|
miiphy_read(dev->name, info->phy_addr, MII_BMCR, &status);
|
|
|
|
/* If phy set to autonegotiate, wait for autonegotiation done,
|
|
* if phy is not autonegotiating, just wait for link up.
|
|
*/
|
|
if ((status & BMCR_ANENABLE) == BMCR_ANENABLE) {
|
|
linkgood = (BMSR_ANEGCOMPLETE | BMSR_LSTATUS);
|
|
} else {
|
|
linkgood = BMSR_LSTATUS;
|
|
}
|
|
/* Read PHY status register */
|
|
miiphy_read(dev->name, info->phy_addr, MII_BMSR, &status);
|
|
if ((status & linkgood) == linkgood)
|
|
break;
|
|
|
|
udelay(1);
|
|
}
|
|
if (i >= MCFFEC_TOUT_LOOP) {
|
|
printf("Link UP timeout\n");
|
|
}
|
|
|
|
/* adapt to the duplex and speed settings of the phy */
|
|
info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
|
|
info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
|
|
}
|
|
|
|
/*
|
|
* Read and write a MII PHY register, routines used by MII Utilities
|
|
*
|
|
* FIXME: These routines are expected to return 0 on success, but mii_send
|
|
* does _not_ return an error code. Maybe 0xFFFF means error, i.e.
|
|
* no PHY connected...
|
|
* For now always return 0.
|
|
* FIXME: These routines only work after calling eth_init() at least once!
|
|
* Otherwise they hang in mii_send() !!! Sorry!
|
|
*/
|
|
|
|
int mcffec_miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
|
|
unsigned short *value)
|
|
{
|
|
short rdreg; /* register working value */
|
|
|
|
#ifdef MII_DEBUG
|
|
printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
|
|
#endif
|
|
rdreg = mii_send(mk_mii_read(addr, reg));
|
|
|
|
*value = rdreg;
|
|
|
|
#ifdef MII_DEBUG
|
|
printf("0x%04x\n", *value);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mcffec_miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
|
|
unsigned short value)
|
|
{
|
|
#ifdef MII_DEBUG
|
|
printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
|
|
#endif
|
|
|
|
mii_send(mk_mii_write(addr, reg, value));
|
|
|
|
#ifdef MII_DEBUG
|
|
printf("0x%04x\n", value);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_CMD_NET */
|