u-boot/configs/stm32f746-disco_defconfig
Vikas Manocha 280057bd7d stm32f7: use stm32f7 gpio driver supporting driver model
With this gpio driver supporting DM, there is no need to enable clocks
for different gpios (for pin muxing) in the board specific code.

Need to increase the allocatable area required before relocation from 0x400 to
0xC00 becuase of 10 new gpio devices(& new gpio class) added in device tree.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08 11:57:21 -04:00

55 lines
1.3 KiB
Text

CONFIG_ARM=y
CONFIG_STM32=y
CONFIG_STM32F7=y
CONFIG_TARGET_STM32F746_DISCO=y
CONFIG_DEFAULT_DEVICE_TREE="stm32f746-disco"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_AUTOBOOT_STOP_STR=" "
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_SF=y
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DNS=y
CONFIG_CMD_LINK_LOCAL=y
CONFIG_CMD_TIMER=y
CONFIG_OF_CONTROL=y
CONFIG_DM_SEQ_ALIAS=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_CLK=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_FULL is not set
CONFIG_PINCTRL_STM32=y
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DM_SPI=y
CONFIG_STM32_QSPI=y
CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_EFI_LOADER is not set
CONFIG_CLK=y
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_FULL is not set
CONFIG_PINCTRL_STM32=y
CONFIG_RAM=y
CONFIG_STM32_SDRAM=y
CONFIG_DM_GPIO=y
CONFIG_STM32F7_GPIO=y
CONFIG_SYS_MALLOC_F_LEN=0xC00