mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
c925be73a0
The PX30-µQ7 (Ringneck) is a system-on-module featuring the Rockchip
PX30 in a micro Qseven-compatible form-factor.
PX30-µQ7 features:
* CPU: quad-core Cortex-A35
* DRAM: 2GB dual-channel
* eMMC: onboard eMMC
* SD/MMC
* TI DP83825I 10/100Mbps PHY
* USB:
* USB2.0 dual role port
* 3x USB2.0 host via onboard USB2.0 hub
* Display: MIPI-DSI
* Camera: MIPI-CSI
* onboard 2.4GHz WiFi + Bluetooth module
* Companion Controller: on-board additional microcontroller
(STM32 Cortex-M0 or ATtiny):
* RTC
* fan controller
* CAN (only STM32)
The non-U-Boot DTS files are imported from Linux v6.2-rc2.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
69 lines
1.9 KiB
Text
69 lines
1.9 KiB
Text
Introduction
|
|
============
|
|
|
|
The PX30-uQ7 (Ringneck) SoM is a µQseven-compatible (40mmx70mm, MXM-230
|
|
connector) system-on-module from Theobroma Systems[1], featuring the
|
|
Rockchip PX30.
|
|
|
|
It provides the following feature set:
|
|
* up to 4GB DDR4
|
|
* up to 128GB on-module eMMC (with 8-bit 1.8V interface)
|
|
* SD card (on a baseboard) via edge connector
|
|
* Fast Ethernet with on-module TI DP83825I PHY
|
|
* MIPI-DSI/LVDS
|
|
* MIPI-CSI
|
|
* USB
|
|
- 1x USB 2.0 dual-role
|
|
- 3x USB 2.0 host
|
|
* on-module companion controller (STM32 Cortex-M0 or ATtiny), implementing:
|
|
- low-power RTC functionality (ISL1208 emulation)
|
|
- fan controller (AMC6821 emulation)
|
|
- USB<->CAN bridge controller (STM32 only)
|
|
* on-module Espressif ESP32 for Bluetooth + 2.4GHz WiFi
|
|
* on-module NXP SE05x Secure Element
|
|
|
|
Here is the step-by-step to boot to U-Boot on px30.
|
|
|
|
Get the Source and build ATF binary
|
|
===================================
|
|
|
|
> git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
|
|
|
|
Compile the ATF
|
|
===============
|
|
|
|
> cd trusted-firmware-a
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=px30 bl31
|
|
> cp build/px30/release/bl31/bl31.elf ../u-boot/bl31.elf
|
|
|
|
Compile the U-Boot
|
|
==================
|
|
|
|
> cd ../u-boot
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- ringneck-px30_defconfig all
|
|
|
|
Flash the image
|
|
===============
|
|
|
|
Copy u-boot-rockchip.bin to offset 32k for SD/eMMC.
|
|
|
|
SD-Card
|
|
-------
|
|
|
|
> dd if=u-boot-rockchip.bin of=/dev/sdb seek=64
|
|
|
|
eMMC
|
|
----
|
|
|
|
rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with
|
|
help of the Rockchip loader binary.
|
|
|
|
> git clone https://github.com/rockchip-linux/rkdeveloptool
|
|
> cd rkdeveloptool
|
|
> autoreconf -i && ./configure && make
|
|
> git clone https://github.com/rockchip-linux/rkbin.git
|
|
> cd rkbin
|
|
> ./tools/boot_merger RKBOOT/PX30MINIALL.ini
|
|
> cd ..
|
|
> ./rkdeveloptool db rkbin/px30_loader_v1.16.131.bin
|
|
> ./rkdeveloptool wl 64 ../u-boot-rockchip.bin
|