u-boot/arch/arm/cpu/arm1136/mx31/devices.c
Stefano Babic 40f6fffee5 MX: serial_mxc: cleanup removing nasty #ifdef
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
2011-12-06 23:59:40 +01:00

67 lines
2 KiB
C

/*
*
* (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
void mx31_uart1_hw_init(void)
{
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
}
void mx31_uart2_hw_init(void)
{
/* setup pins for UART2 */
mx31_gpio_mux(MUX_RXD2__UART2_RXD_MUX);
mx31_gpio_mux(MUX_TXD2__UART2_TXD_MUX);
mx31_gpio_mux(MUX_RTS2__UART2_RTS_B);
mx31_gpio_mux(MUX_CTS2__UART2_CTS_B);
}
#ifdef CONFIG_MXC_SPI
/*
* Note: putting several spi setups here makes no sense as they may differ
* at board level (physical pin SS0 of CSPI2 may aswell be used as SS0 of CSPI3)
*/
void mx31_spi2_hw_init(void)
{
/* SPI2 */
mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
/* start SPI2 clock */
__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
}
#endif