u-boot/drivers/pinctrl/rockchip/pinctrl-rk3128.c
David Wu 623aca8830 pinctrl: rockchip: Clean the unused type and label
As the mux/pull/drive feature implement at own file,
the type and label are not necessary.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00

211 lines
4.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <dm.h>
#include <dm/pinctrl.h>
#include <regmap.h>
#include <syscon.h>
#include "pinctrl-rockchip.h"
static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
{
.num = 2,
.pin = 20,
.reg = 0xe8,
.bit = 0,
.mask = 0x7
}, {
.num = 2,
.pin = 21,
.reg = 0xe8,
.bit = 4,
.mask = 0x7
}, {
.num = 2,
.pin = 22,
.reg = 0xe8,
.bit = 8,
.mask = 0x7
}, {
.num = 2,
.pin = 23,
.reg = 0xe8,
.bit = 12,
.mask = 0x7
}, {
.num = 2,
.pin = 24,
.reg = 0xd4,
.bit = 12,
.mask = 0x7
},
};
static struct rockchip_mux_route_data rk3128_mux_route_data[] = {
{
/* spi-0 */
.bank_num = 1,
.pin = 10,
.func = 1,
.route_offset = 0x144,
.route_val = BIT(16 + 3) | BIT(16 + 4),
}, {
/* spi-1 */
.bank_num = 1,
.pin = 27,
.func = 3,
.route_offset = 0x144,
.route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(3),
}, {
/* spi-2 */
.bank_num = 0,
.pin = 13,
.func = 2,
.route_offset = 0x144,
.route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(4),
}, {
/* i2s-0 */
.bank_num = 1,
.pin = 5,
.func = 1,
.route_offset = 0x144,
.route_val = BIT(16 + 5),
}, {
/* i2s-1 */
.bank_num = 0,
.pin = 14,
.func = 1,
.route_offset = 0x144,
.route_val = BIT(16 + 5) | BIT(5),
}, {
/* emmc-0 */
.bank_num = 1,
.pin = 22,
.func = 2,
.route_offset = 0x144,
.route_val = BIT(16 + 6),
}, {
/* emmc-1 */
.bank_num = 2,
.pin = 4,
.func = 2,
.route_offset = 0x144,
.route_val = BIT(16 + 6) | BIT(6),
},
};
static int rk3128_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
int iomux_num = (pin / 8);
struct regmap *regmap;
int reg, ret, mask, mux_type;
u8 bit;
u32 data, route_reg, route_val;
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
? priv->regmap_pmu : priv->regmap_base;
/* get basic quadrupel of mux registers and the correct reg inside */
mux_type = bank->iomux[iomux_num].type;
reg = bank->iomux[iomux_num].offset;
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
if (bank->recalced_mask & BIT(pin))
rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
if (bank->route_mask & BIT(pin)) {
if (rockchip_get_mux_route(bank, pin, mux, &route_reg,
&route_val)) {
ret = regmap_write(regmap, route_reg, route_val);
if (ret)
return ret;
}
}
data = (mask << (bit + 16));
data |= (mux & mask) << bit;
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RK3128_PULL_OFFSET 0x118
#define RK3128_PULL_PINS_PER_REG 16
#define RK3128_PULL_BANK_STRIDE 8
static void rk3128_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
*regmap = priv->regmap_base;
*reg = RK3128_PULL_OFFSET;
*reg += bank->bank_num * RK3128_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3128_PULL_PINS_PER_REG) * 4);
*bit = pin_num % RK3128_PULL_PINS_PER_REG;
}
static int rk3128_set_pull(struct rockchip_pin_bank *bank,
int pin_num, int pull)
{
struct regmap *regmap;
int reg, ret;
u8 bit;
u32 data;
if (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT &&
pull != PIN_CONFIG_BIAS_DISABLE)
return -ENOTSUPP;
rk3128_calc_pull_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
data = BIT(bit + 16);
if (pull == PIN_CONFIG_BIAS_DISABLE)
data |= BIT(bit);
ret = regmap_write(regmap, reg, data);
return ret;
}
static struct rockchip_pin_bank rk3128_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
static struct rockchip_pin_ctrl rk3128_pin_ctrl = {
.pin_banks = rk3128_pin_banks,
.nr_banks = ARRAY_SIZE(rk3128_pin_banks),
.grf_mux_offset = 0xa8,
.iomux_recalced = rk3128_mux_recalced_data,
.niomux_recalced = ARRAY_SIZE(rk3128_mux_recalced_data),
.iomux_routes = rk3128_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3128_mux_route_data),
.set_mux = rk3128_set_mux,
.set_pull = rk3128_set_pull,
};
static const struct udevice_id rk3128_pinctrl_ids[] = {
{ .compatible = "rockchip,rk3128-pinctrl",
.data = (ulong)&rk3128_pin_ctrl },
{ }
};
U_BOOT_DRIVER(pinctrl_rk3128) = {
.name = "pinctrl_rk3128",
.id = UCLASS_PINCTRL,
.of_match = rk3128_pinctrl_ids,
.priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv),
.ops = &rockchip_pinctrl_ops,
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
.bind = dm_scan_fdt_dev,
#endif
.probe = rockchip_pinctrl_probe,
};