u-boot/doc/device-tree-bindings/spi/spi-cadence.txt
Simon Goldschmidt 2a3a99932b spi: cadence_qspi: use "cdns,qspi-nor" as compatible
Linux uses "cdns,qspi-nor" as compatible string for the cadence
qspi driver, so change driver, docs and all device trees.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2018-11-29 12:45:15 +01:00

31 lines
1.3 KiB
Text

Cadence QSPI controller device tree bindings
--------------------------------------------
Required properties:
- compatible : should be "cdns,qspi-nor"
- reg : 1.Physical base address and size of SPI registers map.
2. Physical base address & size of NOR Flash.
- clocks : Clock phandles (see clock bindings for details).
- cdns,fifo-depth : Size of the data FIFO in words.
- cdns,fifo-width : Bus width of the data FIFO in bytes.
- cdns,trigger-address : 32-bit indirect AHB trigger address.
- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
- status : enable in requried dts.
connected flash properties
--------------------------
- spi-max-frequency : Max supported spi frequency.
- page-size : Flash page size.
- block-size : Flash memory block size.
- cdns,tshsl-ns : Added delay in master reference clocks (ref_clk) for
the length that the master mode chip select outputs
are de-asserted between transactions.
- cdns,tsd2d-ns : Delay in master reference clocks (ref_clk) between one
chip select being de-activated and the activation of
another.
- cdns,tchsh-ns : Delay in master reference clocks between last bit of
current transaction and de-asserting the device chip
select (n_ss_out).
- cdns,tslch-ns : Delay in master reference clocks between setting
n_ss_out low and first bit transfer