mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 11:13:07 +00:00
d1c3d8bdfa
Some MIPS systems store some board-specific boot configuration in the U-Boot binary at offset 0x10. This is used by Malta boards and by Lantiq/Intel SoC's when booting from parallel NOR flash. Convert the hard-coded values to Kconfig options to remove such board-specific stuff out of the generic start.S code. This also deprecates the config option CONFIG_SYS_XWAY_EBU_BOOTCFG. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
269 lines
5.1 KiB
ArmAsm
269 lines
5.1 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Startup Code for MIPS32 CPU-core
|
|
*
|
|
* Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
#include <asm/asm.h>
|
|
#include <asm/regdef.h>
|
|
#include <asm/mipsregs.h>
|
|
|
|
#ifndef CONFIG_SYS_INIT_SP_ADDR
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
|
|
CONFIG_SYS_INIT_SP_OFFSET)
|
|
#endif
|
|
|
|
#ifdef CONFIG_32BIT
|
|
# define MIPS_RELOC 3
|
|
# define STATUS_SET 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_64BIT
|
|
# ifdef CONFIG_SYS_LITTLE_ENDIAN
|
|
# define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
|
|
(((r_type) << 24) | ((r_type2) << 16) | ((r_type3) << 8) | (ssym))
|
|
# else
|
|
# define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
|
|
((r_type) | ((r_type2) << 8) | ((r_type3) << 16) | (ssym) << 24)
|
|
# endif
|
|
# define MIPS_RELOC MIPS64_R_INFO(0x00, 0x00, 0x12, 0x03)
|
|
# define STATUS_SET ST0_KX
|
|
#endif
|
|
|
|
.set noreorder
|
|
|
|
.macro init_wr sel
|
|
MTC0 zero, CP0_WATCHLO,\sel
|
|
mtc0 t1, CP0_WATCHHI,\sel
|
|
mfc0 t0, CP0_WATCHHI,\sel
|
|
bgez t0, wr_done
|
|
nop
|
|
.endm
|
|
|
|
.macro uhi_mips_exception
|
|
move k0, t9 # preserve t9 in k0
|
|
move k1, a0 # preserve a0 in k1
|
|
li t9, 15 # UHI exception operation
|
|
li a0, 0 # Use hard register context
|
|
sdbbp 1 # Invoke UHI operation
|
|
.endm
|
|
|
|
.macro setup_stack_gd
|
|
li t0, -16
|
|
PTR_LI t1, CONFIG_SYS_INIT_SP_ADDR
|
|
and sp, t1, t0 # force 16 byte alignment
|
|
PTR_SUBU \
|
|
sp, sp, GD_SIZE # reserve space for gd
|
|
and sp, sp, t0 # force 16 byte alignment
|
|
move k0, sp # save gd pointer
|
|
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
|
|
li t2, CONFIG_VAL(SYS_MALLOC_F_LEN)
|
|
PTR_SUBU \
|
|
sp, sp, t2 # reserve space for early malloc
|
|
and sp, sp, t0 # force 16 byte alignment
|
|
#endif
|
|
move fp, sp
|
|
|
|
/* Clear gd */
|
|
move t0, k0
|
|
1:
|
|
PTR_S zero, 0(t0)
|
|
blt t0, t1, 1b
|
|
PTR_ADDIU t0, PTRSIZE
|
|
|
|
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
|
|
PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset
|
|
#endif
|
|
.endm
|
|
|
|
ENTRY(_start)
|
|
/* U-Boot entry point */
|
|
b reset
|
|
mtc0 zero, CP0_COUNT # clear cp0 count for most accurate boot timing
|
|
|
|
#if defined(CONFIG_MIPS_INSERT_BOOT_CONFIG)
|
|
/*
|
|
* Store some board-specific boot configuration. This is used by some
|
|
* MIPS systems like Malta.
|
|
*/
|
|
.org 0x10
|
|
.word CONFIG_MIPS_BOOT_CONFIG_WORD0
|
|
.word CONFIG_MIPS_BOOT_CONFIG_WORD1
|
|
#endif
|
|
|
|
#if defined(CONFIG_ROM_EXCEPTION_VECTORS)
|
|
/*
|
|
* Exception vector entry points. When running from ROM, an exception
|
|
* cannot be handled. Halt execution and transfer control to debugger,
|
|
* if one is attached.
|
|
*/
|
|
.org 0x200
|
|
/* TLB refill, 32 bit task */
|
|
uhi_mips_exception
|
|
|
|
.org 0x280
|
|
/* XTLB refill, 64 bit task */
|
|
uhi_mips_exception
|
|
|
|
.org 0x300
|
|
/* Cache error exception */
|
|
uhi_mips_exception
|
|
|
|
.org 0x380
|
|
/* General exception */
|
|
uhi_mips_exception
|
|
|
|
.org 0x400
|
|
/* Catch interrupt exceptions */
|
|
uhi_mips_exception
|
|
|
|
.org 0x480
|
|
/* EJTAG debug exception */
|
|
1: b 1b
|
|
nop
|
|
|
|
.org 0x500
|
|
#endif
|
|
|
|
reset:
|
|
#if __mips_isa_rev >= 6
|
|
mfc0 t0, CP0_CONFIG, 5
|
|
and t0, t0, MIPS_CONF5_VP
|
|
beqz t0, 1f
|
|
nop
|
|
|
|
b 2f
|
|
mfc0 t0, CP0_GLOBALNUMBER
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_BMIPS
|
|
1: mfc0 t0, CP0_DIAGNOSTIC, 3
|
|
and t0, t0, (1 << 31)
|
|
#else
|
|
1: mfc0 t0, CP0_EBASE
|
|
and t0, t0, EBASE_CPUNUM
|
|
#endif
|
|
|
|
/* Hang if this isn't the first CPU in the system */
|
|
2: beqz t0, 4f
|
|
nop
|
|
3: wait
|
|
b 3b
|
|
nop
|
|
|
|
/* Init CP0 Status */
|
|
4: mfc0 t0, CP0_STATUS
|
|
and t0, ST0_IMPL
|
|
or t0, ST0_BEV | ST0_ERL | STATUS_SET
|
|
mtc0 t0, CP0_STATUS
|
|
|
|
/*
|
|
* Check whether CP0 Config1 is implemented. If not continue
|
|
* with legacy Watch register initialization.
|
|
*/
|
|
mfc0 t0, CP0_CONFIG
|
|
bgez t0, wr_legacy
|
|
nop
|
|
|
|
/*
|
|
* Check WR bit in CP0 Config1 to determine if Watch registers
|
|
* are implemented.
|
|
*/
|
|
mfc0 t0, CP0_CONFIG, 1
|
|
andi t0, (1 << 3)
|
|
beqz t0, wr_done
|
|
nop
|
|
|
|
/* Clear Watch Status bits and disable watch exceptions */
|
|
li t1, 0x7 # Clear I, R and W conditions
|
|
init_wr 0
|
|
init_wr 1
|
|
init_wr 2
|
|
init_wr 3
|
|
init_wr 4
|
|
init_wr 5
|
|
init_wr 6
|
|
init_wr 7
|
|
b wr_done
|
|
nop
|
|
|
|
wr_legacy:
|
|
MTC0 zero, CP0_WATCHLO
|
|
mtc0 zero, CP0_WATCHHI
|
|
|
|
wr_done:
|
|
/* Clear WP, IV and SW interrupts */
|
|
mtc0 zero, CP0_CAUSE
|
|
|
|
/* Clear timer interrupt (CP0_COUNT cleared on branch to 'reset') */
|
|
mtc0 zero, CP0_COMPARE
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
mfc0 t0, CP0_CONFIG
|
|
and t0, t0, MIPS_CONF_IMPL
|
|
or t0, t0, CONF_CM_UNCACHED
|
|
mtc0 t0, CP0_CONFIG
|
|
ehb
|
|
#endif
|
|
|
|
#ifdef CONFIG_MIPS_CM
|
|
PTR_LA t9, mips_cm_map
|
|
jalr t9
|
|
nop
|
|
#endif
|
|
|
|
#ifdef CONFIG_MIPS_INIT_STACK_IN_SRAM
|
|
/* Set up initial stack and global data */
|
|
setup_stack_gd
|
|
|
|
# ifdef CONFIG_DEBUG_UART
|
|
/* Earliest point to set up debug uart */
|
|
PTR_LA t9, debug_uart_init
|
|
jalr t9
|
|
nop
|
|
# endif
|
|
#endif
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
# ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
|
|
/* Initialize any external memory */
|
|
PTR_LA t9, lowlevel_init
|
|
jalr t9
|
|
nop
|
|
# endif
|
|
|
|
/* Initialize caches... */
|
|
PTR_LA t9, mips_cache_reset
|
|
jalr t9
|
|
nop
|
|
|
|
# ifndef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
|
|
/* Initialize any external memory */
|
|
PTR_LA t9, lowlevel_init
|
|
jalr t9
|
|
nop
|
|
# endif
|
|
#endif
|
|
|
|
#ifndef CONFIG_MIPS_INIT_STACK_IN_SRAM
|
|
/* Set up initial stack and global data */
|
|
setup_stack_gd
|
|
|
|
# ifdef CONFIG_DEBUG_UART
|
|
/* Earliest point to set up debug uart */
|
|
PTR_LA t9, debug_uart_init
|
|
jalr t9
|
|
nop
|
|
# endif
|
|
#endif
|
|
|
|
move a0, zero # a0 <-- boot_flags = 0
|
|
PTR_LA t9, board_init_f
|
|
|
|
jr t9
|
|
move ra, zero
|
|
|
|
END(_start)
|