mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 11:13:07 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
154 lines
3.8 KiB
C
154 lines
3.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <debug_uart.h>
|
|
#include <dm.h>
|
|
#include <ram.h>
|
|
#include <spl.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/bootrom.h>
|
|
#include <asm/arch/cru_rk3368.h>
|
|
#include <asm/arch/grf_rk3368.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/timer.h>
|
|
#include <syscon.h>
|
|
|
|
/*
|
|
* The SPL (and also the full U-Boot stage on the RK3368) will run in
|
|
* secure mode (i.e. EL3) and an ATF will eventually be booted before
|
|
* starting up the operating system... so we can initialize the SGRF
|
|
* here and rely on the ATF installing the final (secure) policy
|
|
* later.
|
|
*/
|
|
static inline uintptr_t sgrf_soc_con_addr(unsigned no)
|
|
{
|
|
const uintptr_t SGRF_BASE =
|
|
(uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF);
|
|
|
|
return SGRF_BASE + sizeof(u32) * no;
|
|
}
|
|
|
|
static inline uintptr_t sgrf_busdmac_addr(unsigned no)
|
|
{
|
|
const uintptr_t SGRF_BASE =
|
|
(uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF);
|
|
const uintptr_t SGRF_BUSDMAC_OFFSET = 0x100;
|
|
const uintptr_t SGRF_BUSDMAC_BASE = SGRF_BASE + SGRF_BUSDMAC_OFFSET;
|
|
|
|
return SGRF_BUSDMAC_BASE + sizeof(u32) * no;
|
|
}
|
|
|
|
static void sgrf_init(void)
|
|
{
|
|
struct rk3368_cru * const cru =
|
|
(struct rk3368_cru * const)rockchip_get_cru();
|
|
const u16 SGRF_SOC_CON_SEC = GENMASK(15, 0);
|
|
const u16 SGRF_BUSDMAC_CON0_SEC = BIT(2);
|
|
const u16 SGRF_BUSDMAC_CON1_SEC = GENMASK(15, 12);
|
|
|
|
/* Set all configurable IP to 'non secure'-mode */
|
|
rk_setreg(sgrf_soc_con_addr(5), SGRF_SOC_CON_SEC);
|
|
rk_setreg(sgrf_soc_con_addr(6), SGRF_SOC_CON_SEC);
|
|
rk_setreg(sgrf_soc_con_addr(7), SGRF_SOC_CON_SEC);
|
|
|
|
/*
|
|
* From rockchip-uboot/arch/arm/cpu/armv8/rk33xx/cpu.c
|
|
* Original comment: "ddr space set no secure mode"
|
|
*/
|
|
rk_clrreg(sgrf_soc_con_addr(8), SGRF_SOC_CON_SEC);
|
|
rk_clrreg(sgrf_soc_con_addr(9), SGRF_SOC_CON_SEC);
|
|
rk_clrreg(sgrf_soc_con_addr(10), SGRF_SOC_CON_SEC);
|
|
|
|
/* Set 'secure dma' to 'non secure'-mode */
|
|
rk_setreg(sgrf_busdmac_addr(0), SGRF_BUSDMAC_CON0_SEC);
|
|
rk_setreg(sgrf_busdmac_addr(1), SGRF_BUSDMAC_CON1_SEC);
|
|
|
|
dsb(); /* barrier */
|
|
|
|
rk_setreg(&cru->softrst_con[1], DMA1_SRST_REQ);
|
|
rk_setreg(&cru->softrst_con[4], DMA2_SRST_REQ);
|
|
|
|
dsb(); /* barrier */
|
|
udelay(10);
|
|
|
|
rk_clrreg(&cru->softrst_con[1], DMA1_SRST_REQ);
|
|
rk_clrreg(&cru->softrst_con[4], DMA2_SRST_REQ);
|
|
}
|
|
|
|
void board_debug_uart_init(void)
|
|
{
|
|
/*
|
|
* N.B.: This is called before the device-model has been
|
|
* initialised. For this reason, we can not access
|
|
* the GRF address range using the syscon API.
|
|
*/
|
|
struct rk3368_grf * const grf =
|
|
(struct rk3368_grf * const)0xff770000;
|
|
|
|
enum {
|
|
GPIO2D1_MASK = GENMASK(3, 2),
|
|
GPIO2D1_GPIO = 0,
|
|
GPIO2D1_UART0_SOUT = (1 << 2),
|
|
|
|
GPIO2D0_MASK = GENMASK(1, 0),
|
|
GPIO2D0_GPIO = 0,
|
|
GPIO2D0_UART0_SIN = (1 << 0),
|
|
};
|
|
|
|
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
|
|
/* Enable early UART0 on the RK3368 */
|
|
rk_clrsetreg(&grf->gpio2d_iomux,
|
|
GPIO2D0_MASK, GPIO2D0_UART0_SIN);
|
|
rk_clrsetreg(&grf->gpio2d_iomux,
|
|
GPIO2D1_MASK, GPIO2D1_UART0_SOUT);
|
|
#endif
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
#define EARLY_UART
|
|
#ifdef EARLY_UART
|
|
/*
|
|
* Debug UART can be used from here if required:
|
|
*
|
|
* debug_uart_init();
|
|
* printch('a');
|
|
* printhex8(0x1234);
|
|
* printascii("string");
|
|
*/
|
|
debug_uart_init();
|
|
printascii("U-Boot TPL board init\n");
|
|
#endif
|
|
|
|
ret = spl_early_init();
|
|
if (ret) {
|
|
debug("spl_early_init() failed: %d\n", ret);
|
|
hang();
|
|
}
|
|
|
|
/* Reset security, so we can use DMA in the MMC drivers */
|
|
sgrf_init();
|
|
|
|
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
|
|
if (ret) {
|
|
debug("DRAM init failed: %d\n", ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
void board_return_to_bootrom(void)
|
|
{
|
|
back_to_bootrom(BROM_BOOT_NEXTSTAGE);
|
|
}
|
|
|
|
u32 spl_boot_device(void)
|
|
{
|
|
return BOOT_DEVICE_BOOTROM;
|
|
}
|