mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
72cc987002
Some A64 boards (SoPine and Pinebook production batch) use LPDDR3 DRAM chips. Add support for LPDDR3 DRAM in the DesignWare-like DRAM controller code. Real LPDDR3 chips' support is not added yet in this commit. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
768 lines
24 KiB
C
768 lines
24 KiB
C
/*
|
|
* sun8i H3 platform dram controller init
|
|
*
|
|
* (C) Copyright 2007-2015 Allwinner Technology Co.
|
|
* Jerry Wang <wangflord@allwinnertech.com>
|
|
* (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com>
|
|
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
|
|
* (C) Copyright 2015 Jens Kuske <jenskuske@gmail.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/dram.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <linux/kconfig.h>
|
|
|
|
static void mctl_phy_init(u32 val)
|
|
{
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
writel(val | PIR_INIT, &mctl_ctl->pir);
|
|
mctl_await_completion(&mctl_ctl->pgsr[0], PGSR_INIT_DONE, 0x1);
|
|
}
|
|
|
|
static void mctl_set_bit_delays(struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
int i, j;
|
|
|
|
clrbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
|
|
|
|
for (i = 0; i < NR_OF_BYTE_LANES; i++)
|
|
for (j = 0; j < LINES_PER_BYTE_LANE; j++)
|
|
writel(DXBDLR_WRITE_DELAY(para->dx_write_delays[i][j]) |
|
|
DXBDLR_READ_DELAY(para->dx_read_delays[i][j]),
|
|
&mctl_ctl->dx[i].bdlr[j]);
|
|
|
|
for (i = 0; i < 31; i++)
|
|
writel(ACBDLR_WRITE_DELAY(para->ac_delays[i]),
|
|
&mctl_ctl->acbdlr[i]);
|
|
|
|
#ifdef CONFIG_MACH_SUN8I_R40
|
|
/* DQSn, DMn, DQn output enable bit delay */
|
|
for (i = 0; i < 4; i++)
|
|
writel(0x6 << 24, &mctl_ctl->dx[i].sdlr);
|
|
#endif
|
|
|
|
setbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
|
|
}
|
|
|
|
enum {
|
|
MBUS_PORT_CPU = 0,
|
|
MBUS_PORT_GPU = 1,
|
|
MBUS_PORT_UNUSED = 2,
|
|
MBUS_PORT_DMA = 3,
|
|
MBUS_PORT_VE = 4,
|
|
MBUS_PORT_CSI = 5,
|
|
MBUS_PORT_NAND = 6,
|
|
MBUS_PORT_SS = 7,
|
|
MBUS_PORT_TS = 8,
|
|
MBUS_PORT_DI = 9,
|
|
MBUS_PORT_DE = 10,
|
|
MBUS_PORT_DE_CFD = 11,
|
|
MBUS_PORT_UNKNOWN1 = 12,
|
|
MBUS_PORT_UNKNOWN2 = 13,
|
|
MBUS_PORT_UNKNOWN3 = 14,
|
|
};
|
|
|
|
enum {
|
|
MBUS_QOS_LOWEST = 0,
|
|
MBUS_QOS_LOW,
|
|
MBUS_QOS_HIGH,
|
|
MBUS_QOS_HIGHEST
|
|
};
|
|
|
|
inline void mbus_configure_port(u8 port,
|
|
bool bwlimit,
|
|
bool priority,
|
|
u8 qos, /* MBUS_QOS_LOWEST .. MBUS_QOS_HIGEST */
|
|
u8 waittime, /* 0 .. 0xf */
|
|
u8 acs, /* 0 .. 0xff */
|
|
u16 bwl0, /* 0 .. 0xffff, bandwidth limit in MB/s */
|
|
u16 bwl1,
|
|
u16 bwl2)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0)
|
|
| (priority ? (1 << 1) : 0)
|
|
| ((qos & 0x3) << 2)
|
|
| ((waittime & 0xf) << 4)
|
|
| ((acs & 0xff) << 8)
|
|
| (bwl0 << 16) );
|
|
const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff);
|
|
|
|
debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
|
|
writel(cfg0, &mctl_com->mcr[port][0]);
|
|
writel(cfg1, &mctl_com->mcr[port][1]);
|
|
}
|
|
|
|
#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2) \
|
|
mbus_configure_port(MBUS_PORT_ ## port, bwlimit, false, \
|
|
MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2)
|
|
|
|
static void mctl_set_master_priority_h3(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel((1 << 16) | (400 << 0), &mctl_com->bwcr);
|
|
|
|
/* set cpu high priority */
|
|
writel(0x00000001, &mctl_com->mapr);
|
|
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 512, 256, 128);
|
|
MBUS_CONF( GPU, true, HIGH, 0, 1536, 1024, 256);
|
|
MBUS_CONF(UNUSED, true, HIGHEST, 0, 512, 256, 96);
|
|
MBUS_CONF( DMA, true, HIGHEST, 0, 256, 128, 32);
|
|
MBUS_CONF( VE, true, HIGH, 0, 1792, 1600, 256);
|
|
MBUS_CONF( CSI, true, HIGHEST, 0, 256, 128, 32);
|
|
MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
|
|
MBUS_CONF( DE, true, HIGHEST, 3, 8192, 6120, 1024);
|
|
MBUS_CONF(DE_CFD, true, HIGH, 0, 1024, 288, 64);
|
|
}
|
|
|
|
static void mctl_set_master_priority_a64(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel(399, &mctl_com->tmr);
|
|
writel((1 << 16), &mctl_com->bwcr);
|
|
|
|
/* Port 2 is reserved per Allwinner's linux-3.10 source, yet they
|
|
* initialise it */
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 160, 100, 80);
|
|
MBUS_CONF( GPU, false, HIGH, 0, 1536, 1400, 256);
|
|
MBUS_CONF(UNUSED, true, HIGHEST, 0, 512, 256, 96);
|
|
MBUS_CONF( DMA, true, HIGH, 0, 256, 80, 100);
|
|
MBUS_CONF( VE, true, HIGH, 0, 1792, 1600, 256);
|
|
MBUS_CONF( CSI, true, HIGH, 0, 256, 128, 0);
|
|
MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
|
|
MBUS_CONF( DE, true, HIGH, 2, 8192, 6144, 2048);
|
|
MBUS_CONF(DE_CFD, true, HIGH, 0, 1280, 144, 64);
|
|
|
|
writel(0x81000004, &mctl_com->mdfs_bwlr[2]);
|
|
}
|
|
|
|
static void mctl_set_master_priority_h5(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel(399, &mctl_com->tmr);
|
|
writel((1 << 16), &mctl_com->bwcr);
|
|
|
|
/* set cpu high priority */
|
|
writel(0x00000001, &mctl_com->mapr);
|
|
|
|
/* Port 2 is reserved per Allwinner's linux-3.10 source, yet
|
|
* they initialise it */
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 300, 260, 150);
|
|
MBUS_CONF( GPU, true, HIGHEST, 0, 600, 400, 200);
|
|
MBUS_CONF(UNUSED, true, HIGHEST, 0, 512, 256, 96);
|
|
MBUS_CONF( DMA, true, HIGHEST, 0, 256, 128, 32);
|
|
MBUS_CONF( VE, true, HIGHEST, 0, 1900, 1500, 1000);
|
|
MBUS_CONF( CSI, true, HIGHEST, 0, 150, 120, 100);
|
|
MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
|
|
MBUS_CONF( DE, true, HIGHEST, 3, 3400, 2400, 1024);
|
|
MBUS_CONF(DE_CFD, true, HIGHEST, 0, 600, 400, 200);
|
|
}
|
|
|
|
static void mctl_set_master_priority_r40(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel(399, &mctl_com->tmr);
|
|
writel((1 << 16), &mctl_com->bwcr);
|
|
|
|
/* set cpu high priority */
|
|
writel(0x00000001, &mctl_com->mapr);
|
|
|
|
/* Port 2 is reserved per Allwinner's linux-3.10 source, yet
|
|
* they initialise it */
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 300, 260, 150);
|
|
MBUS_CONF( GPU, true, HIGHEST, 0, 600, 400, 200);
|
|
MBUS_CONF( UNUSED, true, HIGHEST, 0, 512, 256, 96);
|
|
MBUS_CONF( DMA, true, HIGHEST, 0, 256, 128, 32);
|
|
MBUS_CONF( VE, true, HIGHEST, 0, 1900, 1500, 1000);
|
|
MBUS_CONF( CSI, true, HIGHEST, 0, 150, 120, 100);
|
|
MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
|
|
MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
|
|
|
|
/*
|
|
* The port names are probably wrong, but no correct sources
|
|
* are available.
|
|
*/
|
|
MBUS_CONF( DE, true, HIGH, 0, 128, 48, 0);
|
|
MBUS_CONF( DE_CFD, true, HIGH, 0, 384, 256, 0);
|
|
MBUS_CONF(UNKNOWN1, true, HIGHEST, 0, 512, 384, 256);
|
|
MBUS_CONF(UNKNOWN2, true, HIGHEST, 2, 8192, 6144, 1024);
|
|
MBUS_CONF(UNKNOWN3, true, HIGH, 0, 1280, 144, 64);
|
|
}
|
|
|
|
static void mctl_set_master_priority(uint16_t socid)
|
|
{
|
|
switch (socid) {
|
|
case SOCID_H3:
|
|
mctl_set_master_priority_h3();
|
|
return;
|
|
case SOCID_A64:
|
|
mctl_set_master_priority_a64();
|
|
return;
|
|
case SOCID_H5:
|
|
mctl_set_master_priority_h5();
|
|
return;
|
|
case SOCID_R40:
|
|
mctl_set_master_priority_r40();
|
|
return;
|
|
}
|
|
}
|
|
|
|
static u32 bin_to_mgray(int val)
|
|
{
|
|
static const u8 lookup_table[32] = {
|
|
0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
|
|
0x0c, 0x0d, 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09,
|
|
0x18, 0x19, 0x1a, 0x1b, 0x1e, 0x1f, 0x1c, 0x1d,
|
|
0x14, 0x15, 0x16, 0x17, 0x12, 0x13, 0x10, 0x11,
|
|
};
|
|
|
|
return lookup_table[clamp(val, 0, 31)];
|
|
}
|
|
|
|
static int mgray_to_bin(u32 val)
|
|
{
|
|
static const u8 lookup_table[32] = {
|
|
0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05,
|
|
0x0e, 0x0f, 0x0c, 0x0d, 0x08, 0x09, 0x0a, 0x0b,
|
|
0x1e, 0x1f, 0x1c, 0x1d, 0x18, 0x19, 0x1a, 0x1b,
|
|
0x10, 0x11, 0x12, 0x13, 0x16, 0x17, 0x14, 0x15,
|
|
};
|
|
|
|
return lookup_table[val & 0x1f];
|
|
}
|
|
|
|
static void mctl_h3_zq_calibration_quirk(struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
int zq_count;
|
|
|
|
#if defined CONFIG_SUNXI_DRAM_DW_16BIT
|
|
zq_count = 4;
|
|
#else
|
|
zq_count = 6;
|
|
#endif
|
|
|
|
if ((readl(SUNXI_SRAMC_BASE + 0x24) & 0xff) == 0 &&
|
|
(readl(SUNXI_SRAMC_BASE + 0xf0) & 0x1) == 0) {
|
|
u32 reg_val;
|
|
|
|
clrsetbits_le32(&mctl_ctl->zqcr, 0xffff,
|
|
CONFIG_DRAM_ZQ & 0xffff);
|
|
|
|
writel(PIR_CLRSR, &mctl_ctl->pir);
|
|
mctl_phy_init(PIR_ZCAL);
|
|
|
|
reg_val = readl(&mctl_ctl->zqdr[0]);
|
|
reg_val &= (0x1f << 16) | (0x1f << 0);
|
|
reg_val |= reg_val << 8;
|
|
writel(reg_val, &mctl_ctl->zqdr[0]);
|
|
|
|
reg_val = readl(&mctl_ctl->zqdr[1]);
|
|
reg_val &= (0x1f << 16) | (0x1f << 0);
|
|
reg_val |= reg_val << 8;
|
|
writel(reg_val, &mctl_ctl->zqdr[1]);
|
|
writel(reg_val, &mctl_ctl->zqdr[2]);
|
|
} else {
|
|
int i;
|
|
u16 zq_val[6];
|
|
u8 val;
|
|
|
|
writel(0x0a0a0a0a, &mctl_ctl->zqdr[2]);
|
|
|
|
for (i = 0; i < zq_count; i++) {
|
|
u8 zq = (CONFIG_DRAM_ZQ >> (i * 4)) & 0xf;
|
|
|
|
writel((zq << 20) | (zq << 16) | (zq << 12) |
|
|
(zq << 8) | (zq << 4) | (zq << 0),
|
|
&mctl_ctl->zqcr);
|
|
|
|
writel(PIR_CLRSR, &mctl_ctl->pir);
|
|
mctl_phy_init(PIR_ZCAL);
|
|
|
|
zq_val[i] = readl(&mctl_ctl->zqdr[0]) & 0xff;
|
|
writel(REPEAT_BYTE(zq_val[i]), &mctl_ctl->zqdr[2]);
|
|
|
|
writel(PIR_CLRSR, &mctl_ctl->pir);
|
|
mctl_phy_init(PIR_ZCAL);
|
|
|
|
val = readl(&mctl_ctl->zqdr[0]) >> 24;
|
|
zq_val[i] |= bin_to_mgray(mgray_to_bin(val) - 1) << 8;
|
|
}
|
|
|
|
writel((zq_val[1] << 16) | zq_val[0], &mctl_ctl->zqdr[0]);
|
|
writel((zq_val[3] << 16) | zq_val[2], &mctl_ctl->zqdr[1]);
|
|
if (zq_count > 4)
|
|
writel((zq_val[5] << 16) | zq_val[4],
|
|
&mctl_ctl->zqdr[2]);
|
|
}
|
|
}
|
|
|
|
static void mctl_set_cr(uint16_t socid, struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
writel(MCTL_CR_BL8 | MCTL_CR_INTERLEAVED |
|
|
#if defined CONFIG_SUNXI_DRAM_DDR3
|
|
MCTL_CR_DDR3 | MCTL_CR_2T |
|
|
#elif defined CONFIG_SUNXI_DRAM_DDR2
|
|
MCTL_CR_DDR2 | MCTL_CR_2T |
|
|
#elif defined CONFIG_SUNXI_DRAM_LPDDR3
|
|
MCTL_CR_LPDDR3 | MCTL_CR_1T |
|
|
#else
|
|
#error Unsupported DRAM type!
|
|
#endif
|
|
(para->bank_bits == 3 ? MCTL_CR_EIGHT_BANKS : MCTL_CR_FOUR_BANKS) |
|
|
MCTL_CR_BUS_FULL_WIDTH(para->bus_full_width) |
|
|
(para->dual_rank ? MCTL_CR_DUAL_RANK : MCTL_CR_SINGLE_RANK) |
|
|
MCTL_CR_PAGE_SIZE(para->page_size) |
|
|
MCTL_CR_ROW_BITS(para->row_bits), &mctl_com->cr);
|
|
|
|
if (socid == SOCID_R40) {
|
|
if (para->dual_rank)
|
|
panic("Dual rank memory not supported\n");
|
|
|
|
/* Mux pin to A15 address line for single rank memory. */
|
|
setbits_le32(&mctl_com->cr_r1, MCTL_CR_R1_MUX_A15);
|
|
}
|
|
}
|
|
|
|
static void mctl_sys_init(uint16_t socid, struct dram_para *para)
|
|
{
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
clrbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
|
|
clrbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
|
|
clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
|
|
clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
|
|
clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
|
|
if (socid == SOCID_A64 || socid == SOCID_R40)
|
|
clrbits_le32(&ccm->pll11_cfg, CCM_PLL11_CTRL_EN);
|
|
udelay(10);
|
|
|
|
clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
|
|
udelay(1000);
|
|
|
|
if (socid == SOCID_A64 || socid == SOCID_R40) {
|
|
clock_set_pll11(CONFIG_DRAM_CLK * 2 * 1000000, false);
|
|
clrsetbits_le32(&ccm->dram_clk_cfg,
|
|
CCM_DRAMCLK_CFG_DIV_MASK |
|
|
CCM_DRAMCLK_CFG_SRC_MASK,
|
|
CCM_DRAMCLK_CFG_DIV(1) |
|
|
CCM_DRAMCLK_CFG_SRC_PLL11 |
|
|
CCM_DRAMCLK_CFG_UPD);
|
|
} else if (socid == SOCID_H3 || socid == SOCID_H5) {
|
|
clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000, false);
|
|
clrsetbits_le32(&ccm->dram_clk_cfg,
|
|
CCM_DRAMCLK_CFG_DIV_MASK |
|
|
CCM_DRAMCLK_CFG_SRC_MASK,
|
|
CCM_DRAMCLK_CFG_DIV(1) |
|
|
CCM_DRAMCLK_CFG_SRC_PLL5 |
|
|
CCM_DRAMCLK_CFG_UPD);
|
|
}
|
|
mctl_await_completion(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_UPD, 0);
|
|
|
|
setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
|
|
setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
|
|
setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
|
|
setbits_le32(&ccm->mbus0_clk_cfg, MBUS_CLK_GATE);
|
|
|
|
setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
|
|
udelay(10);
|
|
|
|
writel(socid == SOCID_H5 ? 0x8000 : 0xc00e, &mctl_ctl->clken);
|
|
udelay(500);
|
|
}
|
|
|
|
/* These are more guessed based on some Allwinner code. */
|
|
#define DX_GCR_ODT_DYNAMIC (0x0 << 4)
|
|
#define DX_GCR_ODT_ALWAYS_ON (0x1 << 4)
|
|
#define DX_GCR_ODT_OFF (0x2 << 4)
|
|
|
|
static int mctl_channel_init(uint16_t socid, struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
unsigned int i;
|
|
|
|
mctl_set_cr(socid, para);
|
|
mctl_set_timing_params(socid, para);
|
|
mctl_set_master_priority(socid);
|
|
|
|
/* setting VTC, default disable all VT */
|
|
clrbits_le32(&mctl_ctl->pgcr[0], (1 << 30) | 0x3f);
|
|
if (socid == SOCID_H5)
|
|
setbits_le32(&mctl_ctl->pgcr[1], (1 << 24) | (1 << 26));
|
|
else
|
|
clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26);
|
|
|
|
/* increase DFI_PHY_UPD clock */
|
|
writel(PROTECT_MAGIC, &mctl_com->protect);
|
|
udelay(100);
|
|
clrsetbits_le32(&mctl_ctl->upd2, 0xfff << 16, 0x50 << 16);
|
|
writel(0x0, &mctl_com->protect);
|
|
udelay(100);
|
|
|
|
/* set dramc odt */
|
|
for (i = 0; i < 4; i++) {
|
|
u32 clearmask = (0x3 << 4) | (0x1 << 1) | (0x3 << 2) |
|
|
(0x3 << 12) | (0x3 << 14);
|
|
u32 setmask = IS_ENABLED(CONFIG_DRAM_ODT_EN) ?
|
|
DX_GCR_ODT_DYNAMIC : DX_GCR_ODT_OFF;
|
|
|
|
if (socid == SOCID_H5) {
|
|
clearmask |= 0x2 << 8;
|
|
setmask |= 0x4 << 8;
|
|
}
|
|
clrsetbits_le32(&mctl_ctl->dx[i].gcr, clearmask, setmask);
|
|
}
|
|
|
|
/* AC PDR should always ON */
|
|
clrsetbits_le32(&mctl_ctl->aciocr, socid == SOCID_H5 ? (0x1 << 11) : 0,
|
|
0x1 << 1);
|
|
|
|
/* set DQS auto gating PD mode */
|
|
setbits_le32(&mctl_ctl->pgcr[2], 0x3 << 6);
|
|
|
|
if (socid == SOCID_H3) {
|
|
/* dx ddr_clk & hdr_clk dynamic mode */
|
|
clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
|
|
|
|
/* dphy & aphy phase select 270 degree */
|
|
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
|
|
(0x1 << 10) | (0x2 << 8));
|
|
} else if (socid == SOCID_A64 || socid == SOCID_H5) {
|
|
/* dphy & aphy phase select ? */
|
|
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
|
|
(0x0 << 10) | (0x3 << 8));
|
|
} else if (socid == SOCID_R40) {
|
|
/* dx ddr_clk & hdr_clk dynamic mode (tpr13[9] == 0) */
|
|
clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
|
|
|
|
/* dphy & aphy phase select ? */
|
|
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
|
|
(0x0 << 10) | (0x3 << 8));
|
|
}
|
|
|
|
/* set half DQ */
|
|
if (!para->bus_full_width) {
|
|
#if defined CONFIG_SUNXI_DRAM_DW_32BIT
|
|
writel(0x0, &mctl_ctl->dx[2].gcr);
|
|
writel(0x0, &mctl_ctl->dx[3].gcr);
|
|
#elif defined CONFIG_SUNXI_DRAM_DW_16BIT
|
|
writel(0x0, &mctl_ctl->dx[1].gcr);
|
|
#else
|
|
#error Unsupported DRAM bus width!
|
|
#endif
|
|
}
|
|
|
|
/* data training configuration */
|
|
clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24,
|
|
(para->dual_rank ? 0x3 : 0x1) << 24);
|
|
|
|
mctl_set_bit_delays(para);
|
|
udelay(50);
|
|
|
|
if (socid == SOCID_H3) {
|
|
mctl_h3_zq_calibration_quirk(para);
|
|
|
|
mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
|
|
PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
|
|
} else if (socid == SOCID_A64 || socid == SOCID_H5) {
|
|
clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff, CONFIG_DRAM_ZQ);
|
|
|
|
mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
|
|
PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
|
|
/* no PIR_QSGATE for H5 ???? */
|
|
} else if (socid == SOCID_R40) {
|
|
clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff, CONFIG_DRAM_ZQ);
|
|
|
|
mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
|
|
PIR_DRAMRST | PIR_DRAMINIT);
|
|
}
|
|
|
|
/* detect ranks and bus width */
|
|
if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20)) {
|
|
/* only one rank */
|
|
if (((readl(&mctl_ctl->dx[0].gsr[0]) >> 24) & 0x2)
|
|
#if defined CONFIG_SUNXI_DRAM_DW_32BIT
|
|
|| ((readl(&mctl_ctl->dx[1].gsr[0]) >> 24) & 0x2)
|
|
#endif
|
|
) {
|
|
clrsetbits_le32(&mctl_ctl->dtcr, 0xf << 24, 0x1 << 24);
|
|
para->dual_rank = 0;
|
|
}
|
|
|
|
/* only half DQ width */
|
|
#if defined CONFIG_SUNXI_DRAM_DW_32BIT
|
|
if (((readl(&mctl_ctl->dx[2].gsr[0]) >> 24) & 0x1) ||
|
|
((readl(&mctl_ctl->dx[3].gsr[0]) >> 24) & 0x1)) {
|
|
writel(0x0, &mctl_ctl->dx[2].gcr);
|
|
writel(0x0, &mctl_ctl->dx[3].gcr);
|
|
para->bus_full_width = 0;
|
|
}
|
|
#elif defined CONFIG_SUNXI_DRAM_DW_16BIT
|
|
if ((readl(&mctl_ctl->dx[1].gsr[0]) >> 24) & 0x1) {
|
|
writel(0x0, &mctl_ctl->dx[1].gcr);
|
|
para->bus_full_width = 0;
|
|
}
|
|
#endif
|
|
|
|
mctl_set_cr(socid, para);
|
|
udelay(20);
|
|
|
|
/* re-train */
|
|
mctl_phy_init(PIR_QSGATE);
|
|
if (readl(&mctl_ctl->pgsr[0]) & (0xfe << 20))
|
|
return 1;
|
|
}
|
|
|
|
/* check the dramc status */
|
|
mctl_await_completion(&mctl_ctl->statr, 0x1, 0x1);
|
|
|
|
/* liuke added for refresh debug */
|
|
setbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
|
|
udelay(10);
|
|
clrbits_le32(&mctl_ctl->rfshctl0, 0x1 << 31);
|
|
udelay(10);
|
|
|
|
/* set PGCR3, CKE polarity */
|
|
if (socid == SOCID_H3)
|
|
writel(0x00aa0060, &mctl_ctl->pgcr[3]);
|
|
else if (socid == SOCID_A64 || socid == SOCID_H5 || socid == SOCID_R40)
|
|
writel(0xc0aa0060, &mctl_ctl->pgcr[3]);
|
|
|
|
/* power down zq calibration module for power save */
|
|
setbits_le32(&mctl_ctl->zqcr, ZQCR_PWRDOWN);
|
|
|
|
/* enable master access */
|
|
writel(0xffffffff, &mctl_com->maer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mctl_auto_detect_dram_size(uint16_t socid, struct dram_para *para)
|
|
{
|
|
/* detect row address bits */
|
|
para->page_size = 512;
|
|
para->row_bits = 16;
|
|
para->bank_bits = 2;
|
|
mctl_set_cr(socid, para);
|
|
|
|
for (para->row_bits = 11; para->row_bits < 16; para->row_bits++)
|
|
if (mctl_mem_matches((1 << (para->row_bits + para->bank_bits)) * para->page_size))
|
|
break;
|
|
|
|
/* detect bank address bits */
|
|
para->bank_bits = 3;
|
|
mctl_set_cr(socid, para);
|
|
|
|
for (para->bank_bits = 2; para->bank_bits < 3; para->bank_bits++)
|
|
if (mctl_mem_matches((1 << para->bank_bits) * para->page_size))
|
|
break;
|
|
|
|
/* detect page size */
|
|
para->page_size = 8192;
|
|
mctl_set_cr(socid, para);
|
|
|
|
for (para->page_size = 512; para->page_size < 8192; para->page_size *= 2)
|
|
if (mctl_mem_matches(para->page_size))
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* The actual values used here are taken from Allwinner provided boot0
|
|
* binaries, though they are probably board specific, so would likely benefit
|
|
* from invidual tuning for each board. Apparently a lot of boards copy from
|
|
* some Allwinner reference design, so we go with those generic values for now
|
|
* in the hope that they are reasonable for most (all?) boards.
|
|
*/
|
|
#define SUN8I_H3_DX_READ_DELAYS \
|
|
{{ 18, 18, 18, 18, 18, 18, 18, 18, 18, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
|
|
{ 18, 18, 18, 18, 18, 18, 18, 18, 18, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }}
|
|
#define SUN8I_H3_DX_WRITE_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 10 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 10 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 10 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 6 }}
|
|
#define SUN8I_H3_AC_DELAYS \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0 }
|
|
|
|
#define SUN8I_R40_DX_READ_DELAYS \
|
|
{{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 }, \
|
|
{ 14, 14, 14, 14, 14, 14, 14, 14, 14, 0, 0 } }
|
|
#define SUN8I_R40_DX_WRITE_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0 } }
|
|
#define SUN8I_R40_AC_DELAYS \
|
|
{ 0, 0, 3, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 0, 0, 0 }
|
|
|
|
#define SUN50I_A64_DX_READ_DELAYS \
|
|
{{ 16, 16, 16, 16, 17, 16, 16, 17, 16, 1, 0 }, \
|
|
{ 17, 17, 17, 17, 17, 17, 17, 17, 17, 1, 0 }, \
|
|
{ 16, 17, 17, 16, 16, 16, 16, 16, 16, 0, 0 }, \
|
|
{ 17, 17, 17, 17, 17, 17, 17, 17, 17, 1, 0 }}
|
|
#define SUN50I_A64_DX_WRITE_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 15 }, \
|
|
{ 0, 0, 0, 0, 1, 1, 1, 1, 0, 10, 10 }, \
|
|
{ 1, 0, 1, 1, 1, 1, 1, 1, 0, 11, 11 }, \
|
|
{ 1, 0, 0, 1, 1, 1, 1, 1, 0, 12, 12 }}
|
|
#define SUN50I_A64_AC_DELAYS \
|
|
{ 5, 5, 13, 10, 2, 5, 3, 3, \
|
|
0, 3, 3, 3, 1, 0, 0, 0, \
|
|
3, 4, 0, 3, 4, 1, 4, 0, \
|
|
1, 1, 0, 1, 13, 5, 4 }
|
|
|
|
#define SUN8I_H5_DX_READ_DELAYS \
|
|
{{ 14, 15, 17, 17, 17, 17, 17, 18, 17, 3, 3 }, \
|
|
{ 21, 21, 12, 22, 21, 21, 21, 21, 21, 3, 3 }, \
|
|
{ 16, 19, 19, 17, 22, 22, 21, 22, 19, 3, 3 }, \
|
|
{ 21, 21, 22, 22, 20, 21, 19, 19, 19, 3, 3 } }
|
|
#define SUN8I_H5_DX_WRITE_DELAYS \
|
|
{{ 1, 2, 3, 4, 3, 4, 4, 4, 6, 6, 6 }, \
|
|
{ 6, 6, 6, 5, 5, 5, 5, 5, 6, 6, 6 }, \
|
|
{ 0, 2, 4, 2, 6, 5, 5, 5, 6, 6, 6 }, \
|
|
{ 3, 3, 3, 2, 2, 1, 1, 1, 4, 4, 4 } }
|
|
#define SUN8I_H5_AC_DELAYS \
|
|
{ 0, 0, 5, 5, 0, 0, 0, 0, \
|
|
0, 0, 0, 0, 3, 3, 3, 3, \
|
|
3, 3, 3, 3, 3, 3, 3, 3, \
|
|
3, 3, 3, 3, 2, 0, 0 }
|
|
|
|
unsigned long sunxi_dram_init(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
struct dram_para para = {
|
|
.dual_rank = 1,
|
|
.bus_full_width = 1,
|
|
.row_bits = 15,
|
|
.bank_bits = 3,
|
|
.page_size = 4096,
|
|
|
|
#if defined(CONFIG_MACH_SUN8I_H3)
|
|
.dx_read_delays = SUN8I_H3_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN8I_H3_DX_WRITE_DELAYS,
|
|
.ac_delays = SUN8I_H3_AC_DELAYS,
|
|
#elif defined(CONFIG_MACH_SUN8I_R40)
|
|
.dx_read_delays = SUN8I_R40_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN8I_R40_DX_WRITE_DELAYS,
|
|
.ac_delays = SUN8I_R40_AC_DELAYS,
|
|
#elif defined(CONFIG_MACH_SUN50I)
|
|
.dx_read_delays = SUN50I_A64_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN50I_A64_DX_WRITE_DELAYS,
|
|
.ac_delays = SUN50I_A64_AC_DELAYS,
|
|
#elif defined(CONFIG_MACH_SUN50I_H5)
|
|
.dx_read_delays = SUN8I_H5_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN8I_H5_DX_WRITE_DELAYS,
|
|
.ac_delays = SUN8I_H5_AC_DELAYS,
|
|
#endif
|
|
};
|
|
/*
|
|
* Let the compiler optimize alternatives away by passing this value into
|
|
* the static functions. This saves us #ifdefs, but still keeps the binary
|
|
* small.
|
|
*/
|
|
#if defined(CONFIG_MACH_SUN8I_H3)
|
|
uint16_t socid = SOCID_H3;
|
|
#elif defined(CONFIG_MACH_SUN8I_R40)
|
|
uint16_t socid = SOCID_R40;
|
|
/* Currently we cannot support R40 with dual rank memory */
|
|
para.dual_rank = 0;
|
|
#elif defined(CONFIG_MACH_SUN8I_V3S)
|
|
/* TODO: set delays and mbus priority for V3s */
|
|
uint16_t socid = SOCID_H3;
|
|
#elif defined(CONFIG_MACH_SUN50I)
|
|
uint16_t socid = SOCID_A64;
|
|
#elif defined(CONFIG_MACH_SUN50I_H5)
|
|
uint16_t socid = SOCID_H5;
|
|
#endif
|
|
|
|
mctl_sys_init(socid, ¶);
|
|
if (mctl_channel_init(socid, ¶))
|
|
return 0;
|
|
|
|
if (para.dual_rank)
|
|
writel(0x00000303, &mctl_ctl->odtmap);
|
|
else
|
|
writel(0x00000201, &mctl_ctl->odtmap);
|
|
udelay(1);
|
|
|
|
/* odt delay */
|
|
if (socid == SOCID_H3)
|
|
writel(0x0c000400, &mctl_ctl->odtcfg);
|
|
|
|
if (socid == SOCID_A64 || socid == SOCID_H5 || socid == SOCID_R40) {
|
|
/* VTF enable (tpr13[8] == 1) */
|
|
setbits_le32(&mctl_ctl->vtfcr,
|
|
(socid != SOCID_A64 ? 3 : 2) << 8);
|
|
/* DQ hold disable (tpr13[26] == 1) */
|
|
clrbits_le32(&mctl_ctl->pgcr[2], (1 << 13));
|
|
}
|
|
|
|
/* clear credit value */
|
|
setbits_le32(&mctl_com->cccr, 1 << 31);
|
|
udelay(10);
|
|
|
|
mctl_auto_detect_dram_size(socid, ¶);
|
|
mctl_set_cr(socid, ¶);
|
|
|
|
return (1UL << (para.row_bits + para.bank_bits)) * para.page_size *
|
|
(para.dual_rank ? 2 : 1);
|
|
}
|