Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-24 20:13:39 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-omap2/boot-common.c
Andre Przywara 5907357322 spl: mmc: extend spl_mmc_boot_mode() to take mmc argument 
Platforms can overwrite the weak definition of spl_mmc_boot_mode() to
determine where to load U-Boot proper from.
For most of them this is a trivial decision based on Kconfig variables,
but it might be desirable the probe the actual device to answer this
question.

Pass the pointer to the mmc struct to that function, so implementations
can make use of that.

Compile-tested for all users changed.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Ley Foon Tan <ley.foon.tan@inte.com> (for SoCFPGA)
Acked-by: Lokesh Vutla <lokeshvutla@ti.com> (for OMAP and K3)
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-04 23:24:17 +01:00

333 lines
8 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* boot-common.c
*
* Common bootmode functions for omap based boards
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*/
#include <common.h>
#include <ahci.h>
#include <log.h>
#include <dm/uclass.h>
#include <fs_loader.h>
#include <spl.h>
#include <asm/global_data.h>
#include <asm/omap_common.h>
#include <asm/arch/omap.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
#include <scsi.h>
#include <i2c.h>
#include <remoteproc.h>
DECLARE_GLOBAL_DATA_PTR;
#define IPU1_LOAD_ADDR (0xa17ff000)
#define MAX_REMOTECORE_BIN_SIZE (8 * 0x100000)
#define IPU2_LOAD_ADDR (IPU1_LOAD_ADDR + MAX_REMOTECORE_BIN_SIZE)
__weak u32 omap_sys_boot_device(void)
{
return BOOT_DEVICE_NONE;
}
void save_omap_boot_params(void)
{
u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
struct omap_boot_parameters *omap_boot_params;
int sys_boot_device = 0;
u32 boot_device;
u32 boot_mode;
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
omap_boot_params = (struct omap_boot_parameters *)boot_params;
boot_device = omap_boot_params->boot_device;
boot_mode = MMCSD_MODE_UNDEFINED;
/* Boot device */
#ifdef BOOT_DEVICE_NAND_I2C
/*
* Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
* Otherwise the SPL boot IF can't handle this device correctly.
* Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
* Draco leads to this boot-device passed to SPL from the BootROM.
*/
if (boot_device == BOOT_DEVICE_NAND_I2C)
boot_device = BOOT_DEVICE_NAND;
#endif
#ifdef BOOT_DEVICE_QSPI_4
/*
* We get different values for QSPI_1 and QSPI_4 being used, but
* don't actually care about this difference. Rather than
* mangle the later code, if we're coming in as QSPI_4 just
* change to the QSPI_1 value.
*/
if (boot_device == BOOT_DEVICE_QSPI_4)
boot_device = BOOT_DEVICE_SPI;
#endif
#ifdef CONFIG_TI816X
/*
* On PG2.0 and later TI816x the values we get when booting are not the
* same as on PG1.0, which is what the defines are based on. Update
* them as needed.
*/
if (get_cpu_rev() != 1) {
if (boot_device == 0x05) {
omap_boot_params->boot_device = BOOT_DEVICE_NAND;
boot_device = BOOT_DEVICE_NAND;
}
if (boot_device == 0x08) {
omap_boot_params->boot_device = BOOT_DEVICE_MMC1;
boot_device = BOOT_DEVICE_MMC1;
}
}
#endif
/*
* When booting from peripheral booting, the boot device is not usable
* as-is (unless there is support for it), so the boot device is instead
* figured out using the SYS_BOOT pins.
*/
switch (boot_device) {
#if defined(BOOT_DEVICE_UART) && !defined(CONFIG_SPL_YMODEM_SUPPORT)
case BOOT_DEVICE_UART:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_STORAGE)
case BOOT_DEVICE_USB:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_USBETH) && !defined(CONFIG_SPL_USB_ETHER)
case BOOT_DEVICE_USBETH:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH)
case BOOT_DEVICE_CPGMAC:
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU)
case BOOT_DEVICE_DFU:
sys_boot_device = 1;
break;
#endif
}
if (sys_boot_device) {
boot_device = omap_sys_boot_device();
/* MMC raw mode will fallback to FS mode. */
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END))
boot_mode = MMCSD_MODE_RAW;
}
gd->arch.omap_boot_device = boot_device;
/* Boot mode */
#ifdef CONFIG_OMAP34XX
if ((boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
switch (boot_device) {
case BOOT_DEVICE_MMC1:
boot_mode = MMCSD_MODE_FS;
break;
case BOOT_DEVICE_MMC2:
boot_mode = MMCSD_MODE_RAW;
break;
}
}
#else
/*
* If the boot device was dynamically changed and doesn't match what
* the bootrom initially booted, we cannot use the boot device
* descriptor to figure out the boot mode.
*/
if ((boot_device == omap_boot_params->boot_device) &&
(boot_device >= MMC_BOOT_DEVICES_START) &&
(boot_device <= MMC_BOOT_DEVICES_END)) {
boot_params = omap_boot_params->boot_device_descriptor;
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET));
if ((boot_params < NON_SECURE_SRAM_START) ||
(boot_params > NON_SECURE_SRAM_END))
return;
boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET));
if (boot_mode != MMCSD_MODE_FS &&
boot_mode != MMCSD_MODE_RAW)
#ifdef CONFIG_SUPPORT_EMMC_BOOT
boot_mode = MMCSD_MODE_EMMCBOOT;
#else
boot_mode = MMCSD_MODE_UNDEFINED;
#endif
}
#endif
gd->arch.omap_boot_mode = boot_mode;
#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \
!defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)
/* CH flags */
gd->arch.omap_ch_flags = omap_boot_params->ch_flags;
#endif
}
#ifdef CONFIG_SPL_BUILD
u32 spl_boot_device(void)
{
return gd->arch.omap_boot_device;
}
u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
{
return gd->arch.omap_boot_mode;
}
int load_firmware(char *name_fw, u32 *loadaddr)
{
struct udevice *fsdev;
int size = 0;
if (!IS_ENABLED(CONFIG_FS_LOADER))
return 0;
if (!*loadaddr)
return 0;
if (!uclass_get_device(UCLASS_FS_FIRMWARE_LOADER, 0, &fsdev)) {
size = request_firmware_into_buf(fsdev, name_fw,
(void *)*loadaddr, 0, 0);
}
return size;
}
void spl_boot_ipu(void)
{
int ret, size;
u32 loadaddr = IPU1_LOAD_ADDR;
if (!IS_ENABLED(CONFIG_SPL_BUILD) ||
!IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
return;
size = load_firmware("dra7-ipu1-fw.xem4", &loadaddr);
if (size <= 0) {
pr_err("Firmware loading failed\n");
goto skip_ipu1;
}
enable_ipu1_clocks();
ret = rproc_dev_init(0);
if (ret) {
debug("%s: IPU1 failed to initialize on rproc (%d)\n",
__func__, ret);
goto skip_ipu1;
}
ret = rproc_load(0, IPU1_LOAD_ADDR, 0x2000000);
if (ret) {
debug("%s: IPU1 failed to load on rproc (%d)\n", __func__,
ret);
goto skip_ipu1;
}
debug("Starting IPU1...\n");
ret = rproc_start(0);
if (ret)
debug("%s: IPU1 failed to start (%d)\n", __func__, ret);
skip_ipu1:
loadaddr = IPU2_LOAD_ADDR;
size = load_firmware("dra7-ipu2-fw.xem4", &loadaddr);
if (size <= 0) {
pr_err("Firmware loading failed for ipu2\n");
return;
}
enable_ipu2_clocks();
ret = rproc_dev_init(1);
if (ret) {
debug("%s: IPU2 failed to initialize on rproc (%d)\n", __func__,
ret);
return;
}
ret = rproc_load(1, IPU2_LOAD_ADDR, 0x2000000);
if (ret) {
debug("%s: IPU2 failed to load on rproc (%d)\n", __func__,
ret);
return;
}
debug("Starting IPU2...\n");
ret = rproc_start(1);
if (ret)
debug("%s: IPU2 failed to start (%d)\n", __func__, ret);
}
void spl_board_init(void)
{
/* Prepare console output */
preloader_console_init();
#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
gpmc_init();
#endif
#if defined(CONFIG_SPL_I2C) && !CONFIG_IS_ENABLED(DM_I2C)
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW)
arch_misc_init();
#endif
#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
hw_watchdog_init();
#endif
#ifdef CONFIG_AM33XX
am33xx_spl_board_init();
#endif
if (IS_ENABLED(CONFIG_SPL_BUILD) &&
IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
spl_boot_ipu();
}
void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_noargs_t)(u32 *);
image_entry_noargs_t image_entry =
(image_entry_noargs_t) spl_image->entry_point;
u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
debug("image entry point: 0x%lX\n", spl_image->entry_point);
/* Pass the saved boot_params from rom code */
image_entry((u32 *)boot_params);
}
#endif
#ifdef CONFIG_SCSI_AHCI_PLAT
void arch_preboot_os(void)
{
ahci_reset((void __iomem *)DWC_AHSATA_BASE);
}
#endif
Reference in a new issue View git blame Copy permalink