mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
02737ac86d
Add support of secondary boot address for imx8mn. The secondary boot address is hardcoded in the fuse. The value is calculated from there according to the following description: The fuse IMG_CNTN_SET1_OFFSET (0x490[22:19]) is defined as follows: - Secondary boot is disabled if fuse value is bigger than 10, n = fuse value bigger than 10. - n == 0: Offset = 4MB - n == 2: Offset = 1MB - Others & n <= 10 : Offset = 1MB*2^n - For FlexSPI boot, the valid values are: 0, 1, 2, 3, 4, 5, 6, and 7. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
1588 lines
38 KiB
C
1588 lines
38 KiB
C
/*
|
|
* i.MX nand boot control block(bcb).
|
|
*
|
|
* Based on the common/imx-bbu-nand-fcb.c from barebox and imx kobs-ng
|
|
*
|
|
* Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
|
|
* Copyright (C) 2016 Sergey Kubushyn <ksi@koi8.net>
|
|
*
|
|
* Reconstucted by Han Xu <han.xu@nxp.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <nand.h>
|
|
#include <dm/devres.h>
|
|
#include <linux/bug.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <jffs2/jffs2.h>
|
|
#include <linux/bch.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/rawnand.h>
|
|
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/mach-imx/imx-nandbcb.h>
|
|
#include <asm/mach-imx/imximage.cfg>
|
|
#include <mxs_nand.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <nand.h>
|
|
#include <fuse.h>
|
|
|
|
#include "../../../cmd/legacy-mtd-utils.h"
|
|
|
|
/* FCB related flags */
|
|
/* FCB layout with leading 12B reserved */
|
|
#define FCB_LAYOUT_RESV_12B BIT(0)
|
|
/* FCB layout with leading 32B meta data */
|
|
#define FCB_LAYOUT_META_32B BIT(1)
|
|
/* FCB encrypted by Hamming code */
|
|
#define FCB_ENCODE_HAMMING BIT(2)
|
|
/* FCB encrypted by 40bit BCH */
|
|
#define FCB_ENCODE_BCH_40b BIT(3)
|
|
/* FCB encrypted by 62bit BCH */
|
|
#define FCB_ENCODE_BCH_62b BIT(4)
|
|
/* FCB encrypted by BCH */
|
|
#define FCB_ENCODE_BCH (FCB_ENCODE_BCH_40b | FCB_ENCODE_BCH_62b)
|
|
/* FCB data was randomized */
|
|
#define FCB_RANDON_ENABLED BIT(5)
|
|
|
|
/* Firmware related flags */
|
|
/* No 1K padding */
|
|
#define FIRMWARE_NEED_PADDING BIT(8)
|
|
/* Extra firmware*/
|
|
#define FIRMWARE_EXTRA_ONE BIT(9)
|
|
/* Secondary firmware on fixed address */
|
|
#define FIRMWARE_SECONDARY_FIXED_ADDR BIT(10)
|
|
|
|
/* Boot search related flags */
|
|
#define BT_SEARCH_CNT_FROM_FUSE BIT(16)
|
|
|
|
struct platform_config {
|
|
int misc_flags;
|
|
};
|
|
|
|
static struct platform_config plat_config;
|
|
|
|
/* imx6q/dl/solo */
|
|
static struct platform_config imx6qdl_plat_config = {
|
|
.misc_flags = FCB_LAYOUT_RESV_12B |
|
|
FCB_ENCODE_HAMMING |
|
|
FIRMWARE_NEED_PADDING,
|
|
};
|
|
|
|
static struct platform_config imx6sx_plat_config = {
|
|
.misc_flags = FCB_LAYOUT_META_32B |
|
|
FCB_ENCODE_BCH_62b |
|
|
FIRMWARE_NEED_PADDING |
|
|
FCB_RANDON_ENABLED,
|
|
};
|
|
|
|
static struct platform_config imx7d_plat_config = {
|
|
.misc_flags = FCB_LAYOUT_META_32B |
|
|
FCB_ENCODE_BCH_62b |
|
|
FIRMWARE_NEED_PADDING |
|
|
FCB_RANDON_ENABLED,
|
|
};
|
|
|
|
/* imx6ul/ull/ulz */
|
|
static struct platform_config imx6ul_plat_config = {
|
|
.misc_flags = FCB_LAYOUT_META_32B |
|
|
FCB_ENCODE_BCH_40b |
|
|
FIRMWARE_NEED_PADDING,
|
|
};
|
|
|
|
static struct platform_config imx8mq_plat_config = {
|
|
.misc_flags = FCB_LAYOUT_META_32B |
|
|
FCB_ENCODE_BCH_62b |
|
|
FIRMWARE_NEED_PADDING |
|
|
FCB_RANDON_ENABLED |
|
|
FIRMWARE_EXTRA_ONE,
|
|
};
|
|
|
|
/* all other imx8mm */
|
|
static struct platform_config imx8mm_plat_config = {
|
|
.misc_flags = FCB_LAYOUT_META_32B |
|
|
FCB_ENCODE_BCH_62b |
|
|
FIRMWARE_NEED_PADDING |
|
|
FCB_RANDON_ENABLED,
|
|
};
|
|
|
|
/* imx8mn */
|
|
static struct platform_config imx8mn_plat_config = {
|
|
.misc_flags = FCB_LAYOUT_META_32B |
|
|
FCB_ENCODE_BCH_62b |
|
|
FCB_RANDON_ENABLED |
|
|
FIRMWARE_SECONDARY_FIXED_ADDR |
|
|
BT_SEARCH_CNT_FROM_FUSE,
|
|
};
|
|
|
|
/* imx8qx/qm */
|
|
static struct platform_config imx8q_plat_config = {
|
|
.misc_flags = FCB_LAYOUT_META_32B |
|
|
FCB_ENCODE_BCH_62b |
|
|
FCB_RANDON_ENABLED |
|
|
FIRMWARE_SECONDARY_FIXED_ADDR |
|
|
BT_SEARCH_CNT_FROM_FUSE,
|
|
};
|
|
|
|
/* boot search related variables and definitions */
|
|
static int g_boot_search_count = 4;
|
|
static int g_boot_secondary_offset;
|
|
static int g_boot_search_stride;
|
|
static int g_pages_per_stride;
|
|
|
|
/* mtd config structure */
|
|
struct boot_config {
|
|
int dev;
|
|
struct mtd_info *mtd;
|
|
loff_t maxsize;
|
|
loff_t input_size;
|
|
loff_t offset;
|
|
loff_t boot_stream1_address;
|
|
loff_t boot_stream2_address;
|
|
size_t boot_stream1_size;
|
|
size_t boot_stream2_size;
|
|
size_t max_boot_stream_size;
|
|
int stride_size_in_byte;
|
|
int search_area_size_in_bytes;
|
|
int search_area_size_in_pages;
|
|
int secondary_boot_stream_off_in_MB;
|
|
};
|
|
|
|
/* boot_stream config structure */
|
|
struct boot_stream_config {
|
|
char bs_label[32];
|
|
loff_t bs_addr;
|
|
size_t bs_size;
|
|
void *bs_buf;
|
|
loff_t next_bs_addr;
|
|
bool need_padding;
|
|
};
|
|
|
|
/* FW index */
|
|
#define FW1_ONLY 1
|
|
#define FW2_ONLY 2
|
|
#define FW_ALL FW1_ONLY | FW2_ONLY
|
|
#define FW_INX(x) (1 << (x))
|
|
|
|
/* NAND convert macros */
|
|
#define CONV_TO_PAGES(x) ((u32)(x) / (u32)(mtd->writesize))
|
|
#define CONV_TO_BLOCKS(x) ((u32)(x) / (u32)(mtd->erasesize))
|
|
|
|
#define GETBIT(v, n) (((v) >> (n)) & 0x1)
|
|
#define IMX8MQ_SPL_SZ 0x3e000
|
|
#define IMX8MQ_HDMI_FW_SZ 0x19c00
|
|
|
|
static int nandbcb_get_info(int argc, char * const argv[],
|
|
struct boot_config *boot_cfg)
|
|
{
|
|
int dev;
|
|
struct mtd_info *mtd;
|
|
|
|
dev = nand_curr_device;
|
|
if (dev < 0) {
|
|
printf("failed to get nand_curr_device, run nand device\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
mtd = get_nand_dev_by_index(dev);
|
|
if (!mtd) {
|
|
printf("failed to get mtd info\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
boot_cfg->dev = dev;
|
|
boot_cfg->mtd = mtd;
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int nandbcb_get_size(int argc, char * const argv[], int num,
|
|
struct boot_config *boot_cfg)
|
|
{
|
|
int dev;
|
|
loff_t offset, size, maxsize;
|
|
struct mtd_info *mtd;
|
|
|
|
dev = boot_cfg->dev;
|
|
mtd = boot_cfg->mtd;
|
|
size = 0;
|
|
|
|
if (mtd_arg_off_size(argc - num, argv + num, &dev, &offset, &size,
|
|
&maxsize, MTD_DEV_TYPE_NAND, mtd->size))
|
|
return CMD_RET_FAILURE;
|
|
|
|
boot_cfg->maxsize = maxsize;
|
|
boot_cfg->offset = offset;
|
|
|
|
debug("max: %llx, offset: %llx\n", maxsize, offset);
|
|
|
|
if (size && size != maxsize)
|
|
boot_cfg->input_size = size;
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int nandbcb_set_boot_config(int argc, char * const argv[],
|
|
struct boot_config *boot_cfg)
|
|
{
|
|
struct mtd_info *mtd;
|
|
loff_t maxsize;
|
|
loff_t boot_stream1_address, boot_stream2_address, max_boot_stream_size;
|
|
|
|
if (!boot_cfg->mtd) {
|
|
printf("Didn't get the mtd info, quit\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
mtd = boot_cfg->mtd;
|
|
|
|
/*
|
|
* By default
|
|
* set the search count as 4
|
|
* set each FCB/DBBT/Firmware offset at the beginning of blocks
|
|
* customers may change the value as needed
|
|
*/
|
|
|
|
/* if need more compact layout, change these values */
|
|
/* g_boot_search_count was set as 4 at the definition*/
|
|
/* g_pages_per_stride was set as block size */
|
|
|
|
g_pages_per_stride = mtd->erasesize / mtd->writesize;
|
|
|
|
g_boot_search_stride = mtd->writesize * g_pages_per_stride;
|
|
|
|
boot_cfg->stride_size_in_byte = g_boot_search_stride * mtd->writesize;
|
|
boot_cfg->search_area_size_in_bytes =
|
|
g_boot_search_count * g_boot_search_stride;
|
|
boot_cfg->search_area_size_in_pages =
|
|
boot_cfg->search_area_size_in_bytes / mtd->writesize;
|
|
|
|
/* after FCB/DBBT, split the rest of area for two Firmwares */
|
|
if (!boot_cfg->maxsize) {
|
|
printf("Didn't get the maxsize, quit\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
maxsize = boot_cfg->maxsize;
|
|
/* align to page boundary */
|
|
maxsize = ((u32)(maxsize + mtd->writesize - 1)) / (u32)mtd->writesize
|
|
* mtd->writesize;
|
|
|
|
boot_stream1_address = 2 * boot_cfg->search_area_size_in_bytes;
|
|
boot_stream2_address = ((maxsize - boot_stream1_address) / 2 +
|
|
boot_stream1_address);
|
|
|
|
if (g_boot_secondary_offset)
|
|
boot_stream2_address =
|
|
(loff_t)g_boot_secondary_offset * 1024 * 1024;
|
|
|
|
max_boot_stream_size = boot_stream2_address - boot_stream1_address;
|
|
|
|
/* sanity check */
|
|
if (max_boot_stream_size <= 0) {
|
|
debug("st1_addr: %llx, st2_addr: %llx, max: %llx\n",
|
|
boot_stream1_address, boot_stream2_address,
|
|
max_boot_stream_size);
|
|
printf("something wrong with firmware address settings\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
boot_cfg->boot_stream1_address = boot_stream1_address;
|
|
boot_cfg->boot_stream2_address = boot_stream2_address;
|
|
boot_cfg->max_boot_stream_size = max_boot_stream_size;
|
|
|
|
/* set the boot_stream size as the input size now */
|
|
if (boot_cfg->input_size) {
|
|
boot_cfg->boot_stream1_size = boot_cfg->input_size;
|
|
boot_cfg->boot_stream2_size = boot_cfg->input_size;
|
|
}
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int nandbcb_check_space(struct boot_config *boot_cfg)
|
|
{
|
|
size_t maxsize = boot_cfg->maxsize;
|
|
size_t max_boot_stream_size = boot_cfg->max_boot_stream_size;
|
|
loff_t boot_stream2_address = boot_cfg->boot_stream2_address;
|
|
|
|
if (boot_cfg->boot_stream1_size &&
|
|
boot_cfg->boot_stream1_size > max_boot_stream_size) {
|
|
printf("boot stream1 doesn't fit, check partition size or settings\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if (boot_cfg->boot_stream2_size &&
|
|
boot_cfg->boot_stream2_size > maxsize - boot_stream2_address) {
|
|
printf("boot stream2 doesn't fit, check partition size or settings\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
|
|
static uint8_t reverse_bit(uint8_t b)
|
|
{
|
|
b = (b & 0xf0) >> 4 | (b & 0x0f) << 4;
|
|
b = (b & 0xcc) >> 2 | (b & 0x33) << 2;
|
|
b = (b & 0xaa) >> 1 | (b & 0x55) << 1;
|
|
|
|
return b;
|
|
}
|
|
|
|
static void encode_bch_ecc(void *buf, struct fcb_block *fcb, int eccbits)
|
|
{
|
|
int i, j, m = 13;
|
|
int blocksize = 128;
|
|
int numblocks = 8;
|
|
int ecc_buf_size = (m * eccbits + 7) / 8;
|
|
struct bch_control *bch = init_bch(m, eccbits, 0);
|
|
u8 *ecc_buf = kzalloc(ecc_buf_size, GFP_KERNEL);
|
|
u8 *tmp_buf = kzalloc(blocksize * numblocks, GFP_KERNEL);
|
|
u8 *psrc, *pdst;
|
|
|
|
/*
|
|
* The blocks here are bit aligned. If eccbits is a multiple of 8,
|
|
* we just can copy bytes. Otherwiese we must move the blocks to
|
|
* the next free bit position.
|
|
*/
|
|
WARN_ON(eccbits % 8);
|
|
|
|
memcpy(tmp_buf, fcb, sizeof(*fcb));
|
|
|
|
for (i = 0; i < numblocks; i++) {
|
|
memset(ecc_buf, 0, ecc_buf_size);
|
|
psrc = tmp_buf + i * blocksize;
|
|
pdst = buf + i * (blocksize + ecc_buf_size);
|
|
|
|
/* copy data byte aligned to destination buf */
|
|
memcpy(pdst, psrc, blocksize);
|
|
|
|
/*
|
|
* imx-kobs use a modified encode_bch which reverse the
|
|
* bit order of the data before calculating bch.
|
|
* Do this in the buffer and use the bch lib here.
|
|
*/
|
|
for (j = 0; j < blocksize; j++)
|
|
psrc[j] = reverse_bit(psrc[j]);
|
|
|
|
encode_bch(bch, psrc, blocksize, ecc_buf);
|
|
|
|
/* reverse ecc bit */
|
|
for (j = 0; j < ecc_buf_size; j++)
|
|
ecc_buf[j] = reverse_bit(ecc_buf[j]);
|
|
|
|
/* Here eccbuf is byte aligned and we can just copy it */
|
|
memcpy(pdst + blocksize, ecc_buf, ecc_buf_size);
|
|
}
|
|
|
|
kfree(ecc_buf);
|
|
kfree(tmp_buf);
|
|
free_bch(bch);
|
|
}
|
|
#else
|
|
|
|
static u8 calculate_parity_13_8(u8 d)
|
|
{
|
|
u8 p = 0;
|
|
|
|
p |= (GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 3) ^ GETBIT(d, 2)) << 0;
|
|
p |= (GETBIT(d, 7) ^ GETBIT(d, 5) ^ GETBIT(d, 4) ^ GETBIT(d, 2) ^
|
|
GETBIT(d, 1)) << 1;
|
|
p |= (GETBIT(d, 7) ^ GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 1) ^
|
|
GETBIT(d, 0)) << 2;
|
|
p |= (GETBIT(d, 7) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 0)) << 3;
|
|
p |= (GETBIT(d, 6) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 2) ^
|
|
GETBIT(d, 1) ^ GETBIT(d, 0)) << 4;
|
|
|
|
return p;
|
|
}
|
|
|
|
static void encode_hamming_13_8(void *_src, void *_ecc, size_t size)
|
|
{
|
|
int i;
|
|
u8 *src = _src;
|
|
u8 *ecc = _ecc;
|
|
|
|
for (i = 0; i < size; i++)
|
|
ecc[i] = calculate_parity_13_8(src[i]);
|
|
}
|
|
#endif
|
|
|
|
static u32 calc_chksum(void *buf, size_t size)
|
|
{
|
|
u32 chksum = 0;
|
|
u8 *bp = buf;
|
|
size_t i;
|
|
|
|
for (i = 0; i < size; i++)
|
|
chksum += bp[i];
|
|
|
|
return ~chksum;
|
|
}
|
|
|
|
static void fill_fcb(struct fcb_block *fcb, struct boot_config *boot_cfg)
|
|
{
|
|
struct mtd_info *mtd = boot_cfg->mtd;
|
|
struct nand_chip *chip = mtd_to_nand(mtd);
|
|
struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
|
|
struct mxs_nand_layout l;
|
|
|
|
mxs_nand_get_layout(mtd, &l);
|
|
|
|
fcb->fingerprint = FCB_FINGERPRINT;
|
|
fcb->version = FCB_VERSION_1;
|
|
|
|
fcb->datasetup = 80;
|
|
fcb->datahold = 60;
|
|
fcb->addr_setup = 25;
|
|
fcb->dsample_time = 6;
|
|
|
|
fcb->pagesize = mtd->writesize;
|
|
fcb->oob_pagesize = mtd->writesize + mtd->oobsize;
|
|
fcb->sectors = mtd->erasesize / mtd->writesize;
|
|
|
|
fcb->meta_size = l.meta_size;
|
|
fcb->nr_blocks = l.nblocks;
|
|
fcb->ecc_nr = l.data0_size;
|
|
fcb->ecc_level = l.ecc0;
|
|
fcb->ecc_size = l.datan_size;
|
|
fcb->ecc_type = l.eccn;
|
|
fcb->bchtype = l.gf_len;
|
|
|
|
/* DBBT search area starts from the next block after all FCB */
|
|
fcb->dbbt_start = boot_cfg->search_area_size_in_pages;
|
|
|
|
fcb->bb_byte = nand_info->bch_geometry.block_mark_byte_offset;
|
|
fcb->bb_start_bit = nand_info->bch_geometry.block_mark_bit_offset;
|
|
|
|
fcb->phy_offset = mtd->writesize;
|
|
|
|
fcb->disbbm = 0;
|
|
|
|
fcb->fw1_start = CONV_TO_PAGES(boot_cfg->boot_stream1_address);
|
|
fcb->fw2_start = CONV_TO_PAGES(boot_cfg->boot_stream2_address);
|
|
fcb->fw1_pages = CONV_TO_PAGES(boot_cfg->boot_stream1_size);
|
|
fcb->fw2_pages = CONV_TO_PAGES(boot_cfg->boot_stream2_size);
|
|
|
|
fcb->checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4);
|
|
}
|
|
|
|
static int fill_dbbt_data(struct mtd_info *mtd, void *buf, int num_blocks)
|
|
{
|
|
int n, n_bad_blocks = 0;
|
|
u32 *bb = buf + 0x8;
|
|
u32 *n_bad_blocksp = buf + 0x4;
|
|
|
|
for (n = 0; n < num_blocks; n++) {
|
|
loff_t offset = (loff_t)n * mtd->erasesize;
|
|
if (mtd_block_isbad(mtd, offset)) {
|
|
n_bad_blocks++;
|
|
*bb = n;
|
|
bb++;
|
|
}
|
|
}
|
|
|
|
*n_bad_blocksp = n_bad_blocks;
|
|
|
|
return n_bad_blocks;
|
|
}
|
|
|
|
/*
|
|
* return 1 - bad block
|
|
* return 0 - read successfully
|
|
* return < 0 - read failed
|
|
*/
|
|
static int read_fcb(struct boot_config *boot_cfg, struct fcb_block *fcb,
|
|
loff_t off)
|
|
{
|
|
struct mtd_info *mtd;
|
|
void *fcb_raw_page;
|
|
size_t size;
|
|
int ret = 0;
|
|
|
|
mtd = boot_cfg->mtd;
|
|
if (mtd_block_isbad(mtd, off)) {
|
|
printf("Block %d is bad, skipped\n", (int)CONV_TO_BLOCKS(off));
|
|
return 1;
|
|
}
|
|
|
|
fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
|
|
if (!fcb_raw_page) {
|
|
debug("failed to allocate fcb_raw_page\n");
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* User BCH hardware to decode ECC for FCB
|
|
*/
|
|
if (plat_config.misc_flags & FCB_ENCODE_BCH) {
|
|
size = sizeof(struct fcb_block);
|
|
|
|
/* switch nand BCH to FCB compatible settings */
|
|
if (plat_config.misc_flags & FCB_ENCODE_BCH_62b)
|
|
mxs_nand_mode_fcb_62bit(mtd);
|
|
else if (plat_config.misc_flags & FCB_ENCODE_BCH_40b)
|
|
mxs_nand_mode_fcb_40bit(mtd);
|
|
|
|
ret = nand_read(mtd, off, &size, (u_char *)fcb);
|
|
|
|
/* switch BCH back */
|
|
mxs_nand_mode_normal(mtd);
|
|
printf("NAND FCB read from 0x%llx offset 0x%zx read: %s\n",
|
|
off, size, ret ? "ERROR" : "OK");
|
|
|
|
} else if (plat_config.misc_flags & FCB_ENCODE_HAMMING) {
|
|
/* raw read*/
|
|
mtd_oob_ops_t ops = {
|
|
.datbuf = (u8 *)fcb_raw_page,
|
|
.oobbuf = ((u8 *)fcb_raw_page) + mtd->writesize,
|
|
.len = mtd->writesize,
|
|
.ooblen = mtd->oobsize,
|
|
.mode = MTD_OPS_RAW
|
|
};
|
|
|
|
ret = mtd_read_oob(mtd, off, &ops);
|
|
printf("NAND FCB read from 0x%llx offset 0x%zx read: %s\n",
|
|
off, ops.len, ret ? "ERROR" : "OK");
|
|
}
|
|
|
|
if (ret)
|
|
goto fcb_raw_page_err;
|
|
|
|
if ((plat_config.misc_flags & FCB_ENCODE_HAMMING) &&
|
|
(plat_config.misc_flags & FCB_LAYOUT_RESV_12B))
|
|
memcpy(fcb, fcb_raw_page + 12, sizeof(struct fcb_block));
|
|
|
|
/* TODO: check if it can pass Hamming check */
|
|
|
|
fcb_raw_page_err:
|
|
kfree(fcb_raw_page);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int write_fcb(struct boot_config *boot_cfg, struct fcb_block *fcb)
|
|
{
|
|
struct mtd_info *mtd;
|
|
void *fcb_raw_page = NULL;
|
|
int i, ret = 0;
|
|
loff_t off;
|
|
size_t size;
|
|
|
|
mtd = boot_cfg->mtd;
|
|
|
|
/*
|
|
* We prepare raw page only for i.MX6, for i.MX7 we
|
|
* leverage BCH hw module instead
|
|
*/
|
|
if ((plat_config.misc_flags & FCB_ENCODE_HAMMING) &&
|
|
(plat_config.misc_flags & FCB_LAYOUT_RESV_12B)) {
|
|
fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize,
|
|
GFP_KERNEL);
|
|
if (!fcb_raw_page) {
|
|
debug("failed to allocate fcb_raw_page\n");
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
|
|
/* 40 bit BCH, for i.MX6UL(L) */
|
|
encode_bch_ecc(fcb_raw_page + 32, fcb, 40);
|
|
#else
|
|
memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
|
|
encode_hamming_13_8(fcb_raw_page + 12,
|
|
fcb_raw_page + 12 + 512, 512);
|
|
#endif
|
|
/*
|
|
* Set the first and second byte of OOB data to 0xFF,
|
|
* not 0x00. These bytes are used as the Manufacturers Bad
|
|
* Block Marker (MBBM). Since the FCB is mostly written to
|
|
* the first page in a block, a scan for
|
|
* factory bad blocks will detect these blocks as bad, e.g.
|
|
* when function nand_scan_bbt() is executed to build a new
|
|
* bad block table.
|
|
*/
|
|
memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
|
|
}
|
|
|
|
/* start writing FCB from the very beginning */
|
|
off = 0;
|
|
|
|
for (i = 0; i < g_boot_search_count; i++) {
|
|
if (mtd_block_isbad(mtd, off)) {
|
|
printf("Block %d is bad, skipped\n", i);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* User BCH hardware module to generate ECC for FCB
|
|
*/
|
|
if (plat_config.misc_flags & FCB_ENCODE_BCH) {
|
|
size = sizeof(struct fcb_block);
|
|
|
|
/* switch nand BCH to FCB compatible settings */
|
|
if (plat_config.misc_flags & FCB_ENCODE_BCH_62b)
|
|
mxs_nand_mode_fcb_62bit(mtd);
|
|
else if (plat_config.misc_flags & FCB_ENCODE_BCH_40b)
|
|
mxs_nand_mode_fcb_40bit(mtd);
|
|
|
|
ret = nand_write(mtd, off, &size, (u_char *)fcb);
|
|
|
|
/* switch BCH back */
|
|
mxs_nand_mode_normal(mtd);
|
|
printf("NAND FCB write to 0x%zx offset 0x%llx written: %s\n",
|
|
size, off, ret ? "ERROR" : "OK");
|
|
|
|
} else if (plat_config.misc_flags & FCB_ENCODE_HAMMING) {
|
|
/* raw write */
|
|
mtd_oob_ops_t ops = {
|
|
.datbuf = (u8 *)fcb_raw_page,
|
|
.oobbuf = ((u8 *)fcb_raw_page) +
|
|
mtd->writesize,
|
|
.len = mtd->writesize,
|
|
.ooblen = mtd->oobsize,
|
|
.mode = MTD_OPS_RAW
|
|
};
|
|
|
|
ret = mtd_write_oob(mtd, off, &ops);
|
|
printf("NAND FCB write to 0x%llx offset 0x%zx written: %s\n", off, ops.len, ret ? "ERROR" : "OK");
|
|
}
|
|
|
|
if (ret)
|
|
goto fcb_raw_page_err;
|
|
|
|
/* next writing location */
|
|
off += g_boot_search_stride;
|
|
}
|
|
|
|
fcb_raw_page_err:
|
|
kfree(fcb_raw_page);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* return 1 - bad block
|
|
* return 0 - read successfully
|
|
* return < 0 - read failed
|
|
*/
|
|
static int read_dbbt(struct boot_config *boot_cfg, struct dbbt_block *dbbt,
|
|
void *dbbt_data_page, loff_t off)
|
|
{
|
|
size_t size;
|
|
struct mtd_info *mtd;
|
|
loff_t to;
|
|
int ret;
|
|
|
|
mtd = boot_cfg->mtd;
|
|
|
|
if (mtd_block_isbad(mtd, off)) {
|
|
printf("Block %d is bad, skipped\n",
|
|
(int)CONV_TO_BLOCKS(off));
|
|
return 1;
|
|
}
|
|
|
|
size = sizeof(struct dbbt_block);
|
|
ret = nand_read(mtd, off, &size, (u_char *)dbbt);
|
|
printf("NAND DBBT read from 0x%llx offset 0x%zx read: %s\n",
|
|
off, size, ret ? "ERROR" : "OK");
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* dbbtpages == 0 if no bad blocks */
|
|
if (dbbt->dbbtpages > 0) {
|
|
to = off + 4 * mtd->writesize;
|
|
size = mtd->writesize;
|
|
ret = nand_read(mtd, to, &size, dbbt_data_page);
|
|
printf("DBBT data read from 0x%llx offset 0x%zx read: %s\n",
|
|
to, size, ret ? "ERROR" : "OK");
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int write_dbbt(struct boot_config *boot_cfg, struct dbbt_block *dbbt,
|
|
void *dbbt_data_page)
|
|
{
|
|
int i;
|
|
loff_t off, to;
|
|
size_t size;
|
|
struct mtd_info *mtd;
|
|
int ret;
|
|
|
|
mtd = boot_cfg->mtd;
|
|
|
|
/* start writing DBBT after all FCBs */
|
|
off = boot_cfg->search_area_size_in_bytes;
|
|
size = mtd->writesize;
|
|
|
|
for (i = 0; i < g_boot_search_count; i++) {
|
|
if (mtd_block_isbad(mtd, off)) {
|
|
printf("Block %d is bad, skipped\n",
|
|
(int)(i + CONV_TO_BLOCKS(off)));
|
|
continue;
|
|
}
|
|
|
|
ret = nand_write(mtd, off, &size, (u_char *)dbbt);
|
|
printf("NAND DBBT write to 0x%llx offset 0x%zx written: %s\n",
|
|
off, size, ret ? "ERROR" : "OK");
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* dbbtpages == 0 if no bad blocks */
|
|
if (dbbt->dbbtpages > 0) {
|
|
to = off + 4 * mtd->writesize;
|
|
ret = nand_write(mtd, to, &size, dbbt_data_page);
|
|
printf("DBBT data write to 0x%llx offset 0x%zx written: %s\n",
|
|
to, size, ret ? "ERROR" : "OK");
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* next writing location */
|
|
off += g_boot_search_stride;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* reuse the check_skip_len from nand_util.c with minor change*/
|
|
static int check_skip_length(struct boot_config *boot_cfg, loff_t offset,
|
|
size_t length, size_t *used)
|
|
{
|
|
struct mtd_info *mtd = boot_cfg->mtd;
|
|
size_t maxsize = boot_cfg->maxsize;
|
|
size_t len_excl_bad = 0;
|
|
int ret = 0;
|
|
|
|
while (len_excl_bad < length) {
|
|
size_t block_len, block_off;
|
|
loff_t block_start;
|
|
|
|
if (offset >= maxsize)
|
|
return -1;
|
|
|
|
block_start = offset & ~(loff_t)(mtd->erasesize - 1);
|
|
block_off = offset & (mtd->erasesize - 1);
|
|
block_len = mtd->erasesize - block_off;
|
|
|
|
if (!nand_block_isbad(mtd, block_start))
|
|
len_excl_bad += block_len;
|
|
else
|
|
ret = 1;
|
|
|
|
offset += block_len;
|
|
*used += block_len;
|
|
}
|
|
|
|
/* If the length is not a multiple of block_len, adjust. */
|
|
if (len_excl_bad > length)
|
|
*used -= (len_excl_bad - length);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nandbcb_get_next_good_blk_addr(struct boot_config *boot_cfg,
|
|
struct boot_stream_config *bs_cfg)
|
|
{
|
|
struct mtd_info *mtd = boot_cfg->mtd;
|
|
loff_t offset = bs_cfg->bs_addr;
|
|
size_t length = bs_cfg->bs_size;
|
|
size_t used = 0;
|
|
int ret;
|
|
|
|
ret = check_skip_length(boot_cfg, offset, length, &used);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* get next image address */
|
|
bs_cfg->next_bs_addr = (u32)(offset + used + mtd->erasesize - 1)
|
|
/ (u32)mtd->erasesize * mtd->erasesize;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nandbcb_write_bs_skip_bad(struct boot_config *boot_cfg,
|
|
struct boot_stream_config *bs_cfg)
|
|
{
|
|
struct mtd_info *mtd;
|
|
void *buf;
|
|
loff_t offset, maxsize;
|
|
size_t size;
|
|
size_t length;
|
|
int ret;
|
|
bool padding_flag = false;
|
|
|
|
mtd = boot_cfg->mtd;
|
|
offset = bs_cfg->bs_addr;
|
|
maxsize = boot_cfg->maxsize;
|
|
size = bs_cfg->bs_size;
|
|
|
|
/* some boot images may need leading offset */
|
|
if (bs_cfg->need_padding &&
|
|
(plat_config.misc_flags & FIRMWARE_NEED_PADDING))
|
|
padding_flag = 1;
|
|
|
|
if (padding_flag)
|
|
length = ALIGN(size + FLASH_OFFSET_STANDARD, mtd->writesize);
|
|
else
|
|
length = ALIGN(size, mtd->writesize);
|
|
|
|
buf = kzalloc(length, GFP_KERNEL);
|
|
if (!buf) {
|
|
printf("failed to allocate buffer for firmware\n");
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
if (padding_flag)
|
|
memcpy(buf + FLASH_OFFSET_STANDARD, bs_cfg->bs_buf, size);
|
|
else
|
|
memcpy(buf, bs_cfg->bs_buf, size);
|
|
|
|
ret = nand_write_skip_bad(mtd, offset, &length, NULL, maxsize,
|
|
(u_char *)buf, WITH_WR_VERIFY);
|
|
printf("Write %s @0x%llx offset, 0x%zx bytes written: %s\n",
|
|
bs_cfg->bs_label, offset, length, ret ? "ERROR" : "OK");
|
|
|
|
if (ret)
|
|
/* write image failed, quit */
|
|
goto err;
|
|
|
|
/* get next good blk address if needed */
|
|
if (bs_cfg->need_padding) {
|
|
ret = nandbcb_get_next_good_blk_addr(boot_cfg, bs_cfg);
|
|
if (ret < 0) {
|
|
printf("Next image cannot fit in NAND partition\n");
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
/* now we know how the exact image size written to NAND */
|
|
bs_cfg->bs_size = length;
|
|
return 0;
|
|
err:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static int nandbcb_write_fw(struct boot_config *boot_cfg, u_char *buf,
|
|
int index)
|
|
{
|
|
int i;
|
|
loff_t offset;
|
|
size_t size;
|
|
loff_t next_bs_addr;
|
|
struct boot_stream_config bs_cfg;
|
|
int ret;
|
|
|
|
for (i = 0; i < 2; ++i) {
|
|
if (!(FW_INX(i) & index))
|
|
continue;
|
|
|
|
if (i == 0) {
|
|
offset = boot_cfg->boot_stream1_address;
|
|
size = boot_cfg->boot_stream1_size;
|
|
} else {
|
|
offset = boot_cfg->boot_stream2_address;
|
|
size = boot_cfg->boot_stream2_size;
|
|
}
|
|
|
|
/* write Firmware*/
|
|
if (!(plat_config.misc_flags & FIRMWARE_EXTRA_ONE)) {
|
|
memset(&bs_cfg, 0, sizeof(struct boot_stream_config));
|
|
sprintf(bs_cfg.bs_label, "firmware%d", i);
|
|
bs_cfg.bs_addr = offset;
|
|
bs_cfg.bs_size = size;
|
|
bs_cfg.bs_buf = buf;
|
|
bs_cfg.need_padding = 1;
|
|
|
|
ret = nandbcb_write_bs_skip_bad(boot_cfg, &bs_cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* update the boot stream size */
|
|
if (i == 0)
|
|
boot_cfg->boot_stream1_size = bs_cfg.bs_size;
|
|
else
|
|
boot_cfg->boot_stream2_size = bs_cfg.bs_size;
|
|
|
|
} else {
|
|
/* some platforms need extra firmware */
|
|
memset(&bs_cfg, 0, sizeof(struct boot_stream_config));
|
|
sprintf(bs_cfg.bs_label, "fw%d_part%d", i, 1);
|
|
bs_cfg.bs_addr = offset;
|
|
bs_cfg.bs_size = IMX8MQ_HDMI_FW_SZ;
|
|
bs_cfg.bs_buf = buf;
|
|
bs_cfg.need_padding = 1;
|
|
|
|
ret = nandbcb_write_bs_skip_bad(boot_cfg, &bs_cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* update the boot stream size */
|
|
if (i == 0)
|
|
boot_cfg->boot_stream1_size = bs_cfg.bs_size;
|
|
else
|
|
boot_cfg->boot_stream2_size = bs_cfg.bs_size;
|
|
|
|
/* get next image address */
|
|
next_bs_addr = bs_cfg.next_bs_addr;
|
|
|
|
memset(&bs_cfg, 0, sizeof(struct boot_stream_config));
|
|
sprintf(bs_cfg.bs_label, "fw%d_part%d", i, 2);
|
|
bs_cfg.bs_addr = next_bs_addr;
|
|
bs_cfg.bs_size = IMX8MQ_SPL_SZ;
|
|
bs_cfg.bs_buf = (u_char *)(buf + IMX8MQ_HDMI_FW_SZ);
|
|
bs_cfg.need_padding = 0;
|
|
|
|
ret = nandbcb_write_bs_skip_bad(boot_cfg, &bs_cfg);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nandbcb_init(struct boot_config *boot_cfg, u_char *buf)
|
|
{
|
|
struct mtd_info *mtd;
|
|
nand_erase_options_t opts;
|
|
struct fcb_block *fcb;
|
|
struct dbbt_block *dbbt;
|
|
void *dbbt_page, *dbbt_data_page;
|
|
int ret;
|
|
loff_t maxsize, off;
|
|
|
|
mtd = boot_cfg->mtd;
|
|
maxsize = boot_cfg->maxsize;
|
|
off = boot_cfg->offset;
|
|
|
|
/* erase */
|
|
memset(&opts, 0, sizeof(opts));
|
|
opts.offset = off;
|
|
opts.length = maxsize - 1;
|
|
ret = nand_erase_opts(mtd, &opts);
|
|
if (ret) {
|
|
printf("%s: erase failed (ret = %d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Reference documentation from i.MX6DQRM section 8.5.2.2
|
|
*
|
|
* Nand Boot Control Block(BCB) contains two data structures,
|
|
* - Firmware Configuration Block(FCB)
|
|
* - Discovered Bad Block Table(DBBT)
|
|
*
|
|
* FCB contains,
|
|
* - nand timings
|
|
* - DBBT search page address,
|
|
* - start page address of primary firmware
|
|
* - start page address of secondary firmware
|
|
*
|
|
* setup fcb:
|
|
* - number of blocks = mtd partition size / mtd erasesize
|
|
* - two firmware blocks, primary and secondary
|
|
* - first 4 block for FCB/DBBT
|
|
* - rest split in half for primary and secondary firmware
|
|
* - same firmware write twice
|
|
*/
|
|
|
|
/* write Firmware*/
|
|
ret = nandbcb_write_fw(boot_cfg, buf, FW_ALL);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* fill fcb */
|
|
fcb = kzalloc(sizeof(*fcb), GFP_KERNEL);
|
|
if (!fcb) {
|
|
debug("failed to allocate fcb\n");
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
fill_fcb(fcb, boot_cfg);
|
|
|
|
ret = write_fcb(boot_cfg, fcb);
|
|
|
|
/* fill dbbt */
|
|
dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL);
|
|
if (!dbbt_page) {
|
|
debug("failed to allocate dbbt_page\n");
|
|
ret = -ENOMEM;
|
|
goto fcb_err;
|
|
}
|
|
|
|
dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL);
|
|
if (!dbbt_data_page) {
|
|
debug("failed to allocate dbbt_data_page\n");
|
|
ret = -ENOMEM;
|
|
goto dbbt_page_err;
|
|
}
|
|
|
|
dbbt = dbbt_page;
|
|
dbbt->checksum = 0;
|
|
dbbt->fingerprint = DBBT_FINGERPRINT;
|
|
dbbt->version = DBBT_VERSION_1;
|
|
ret = fill_dbbt_data(mtd, dbbt_data_page, CONV_TO_BLOCKS(maxsize));
|
|
if (ret < 0)
|
|
goto dbbt_data_page_err;
|
|
else if (ret > 0)
|
|
dbbt->dbbtpages = 1;
|
|
|
|
/* write dbbt */
|
|
ret = write_dbbt(boot_cfg, dbbt, dbbt_data_page);
|
|
if (ret < 0)
|
|
printf("failed to write FCB/DBBT\n");
|
|
|
|
dbbt_data_page_err:
|
|
kfree(dbbt_data_page);
|
|
dbbt_page_err:
|
|
kfree(dbbt_page);
|
|
fcb_err:
|
|
kfree(fcb);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int do_nandbcb_bcbonly(int argc, char *const argv[])
|
|
{
|
|
struct fcb_block *fcb;
|
|
struct dbbt_block *dbbt;
|
|
struct mtd_info *mtd;
|
|
nand_erase_options_t opts;
|
|
size_t maxsize;
|
|
loff_t off;
|
|
void *dbbt_page, *dbbt_data_page;
|
|
int ret;
|
|
struct boot_config cfg;
|
|
|
|
if (argc < 4)
|
|
return CMD_RET_USAGE;
|
|
|
|
memset(&cfg, 0, sizeof(struct boot_config));
|
|
if (nandbcb_get_info(argc, argv, &cfg))
|
|
return CMD_RET_FAILURE;
|
|
|
|
/* only get the partition info */
|
|
if (nandbcb_get_size(2, argv, 1, &cfg))
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (nandbcb_set_boot_config(argc, argv, &cfg))
|
|
return CMD_RET_FAILURE;
|
|
|
|
mtd = cfg.mtd;
|
|
|
|
cfg.boot_stream1_address = hextoul(argv[2], NULL);
|
|
cfg.boot_stream1_size = hextoul(argv[3], NULL);
|
|
cfg.boot_stream1_size = ALIGN(cfg.boot_stream1_size, mtd->writesize);
|
|
|
|
if (argc > 5) {
|
|
cfg.boot_stream2_address = hextoul(argv[4], NULL);
|
|
cfg.boot_stream2_size = hextoul(argv[5], NULL);
|
|
cfg.boot_stream2_size = ALIGN(cfg.boot_stream2_size,
|
|
mtd->writesize);
|
|
}
|
|
|
|
/* sanity check */
|
|
nandbcb_check_space(&cfg);
|
|
|
|
maxsize = cfg.maxsize;
|
|
off = cfg.offset;
|
|
|
|
/* erase the previous FCB/DBBT */
|
|
memset(&opts, 0, sizeof(opts));
|
|
opts.offset = off;
|
|
opts.length = g_boot_search_stride * 2;
|
|
ret = nand_erase_opts(mtd, &opts);
|
|
if (ret) {
|
|
printf("%s: erase failed (ret = %d)\n", __func__, ret);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
/* fill fcb */
|
|
fcb = kzalloc(sizeof(*fcb), GFP_KERNEL);
|
|
if (!fcb) {
|
|
printf("failed to allocate fcb\n");
|
|
ret = -ENOMEM;
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
fill_fcb(fcb, &cfg);
|
|
|
|
/* write fcb */
|
|
ret = write_fcb(&cfg, fcb);
|
|
|
|
/* fill dbbt */
|
|
dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL);
|
|
if (!dbbt_page) {
|
|
printf("failed to allocate dbbt_page\n");
|
|
ret = -ENOMEM;
|
|
goto fcb_err;
|
|
}
|
|
|
|
dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL);
|
|
if (!dbbt_data_page) {
|
|
printf("failed to allocate dbbt_data_page\n");
|
|
ret = -ENOMEM;
|
|
goto dbbt_page_err;
|
|
}
|
|
|
|
dbbt = dbbt_page;
|
|
dbbt->checksum = 0;
|
|
dbbt->fingerprint = DBBT_FINGERPRINT;
|
|
dbbt->version = DBBT_VERSION_1;
|
|
ret = fill_dbbt_data(mtd, dbbt_data_page, CONV_TO_BLOCKS(maxsize));
|
|
if (ret < 0)
|
|
goto dbbt_data_page_err;
|
|
else if (ret > 0)
|
|
dbbt->dbbtpages = 1;
|
|
|
|
/* write dbbt */
|
|
ret = write_dbbt(&cfg, dbbt, dbbt_data_page);
|
|
|
|
dbbt_data_page_err:
|
|
kfree(dbbt_data_page);
|
|
dbbt_page_err:
|
|
kfree(dbbt_page);
|
|
fcb_err:
|
|
kfree(fcb);
|
|
|
|
if (ret < 0) {
|
|
printf("failed to write FCB/DBBT\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
/* dump data which is read from NAND chip */
|
|
void dump_structure(struct boot_config *boot_cfg, struct fcb_block *fcb,
|
|
struct dbbt_block *dbbt, void *dbbt_data_page)
|
|
{
|
|
int i;
|
|
struct mtd_info *mtd = boot_cfg->mtd;
|
|
|
|
#define P1(x) printf(" %s = 0x%08x\n", #x, fcb->x)
|
|
printf("FCB\n");
|
|
P1(checksum);
|
|
P1(fingerprint);
|
|
P1(version);
|
|
#undef P1
|
|
#define P1(x) printf(" %s = %d\n", #x, fcb->x)
|
|
P1(datasetup);
|
|
P1(datahold);
|
|
P1(addr_setup);
|
|
P1(dsample_time);
|
|
P1(pagesize);
|
|
P1(oob_pagesize);
|
|
P1(sectors);
|
|
P1(nr_nand);
|
|
P1(nr_die);
|
|
P1(celltype);
|
|
P1(ecc_type);
|
|
P1(ecc_nr);
|
|
P1(ecc_size);
|
|
P1(ecc_level);
|
|
P1(meta_size);
|
|
P1(nr_blocks);
|
|
P1(ecc_type_sdk);
|
|
P1(ecc_nr_sdk);
|
|
P1(ecc_size_sdk);
|
|
P1(ecc_level_sdk);
|
|
P1(nr_blocks_sdk);
|
|
P1(meta_size_sdk);
|
|
P1(erase_th);
|
|
P1(bootpatch);
|
|
P1(patch_size);
|
|
P1(fw1_start);
|
|
P1(fw2_start);
|
|
P1(fw1_pages);
|
|
P1(fw2_pages);
|
|
P1(dbbt_start);
|
|
P1(bb_byte);
|
|
P1(bb_start_bit);
|
|
P1(phy_offset);
|
|
P1(bchtype);
|
|
P1(readlatency);
|
|
P1(predelay);
|
|
P1(cedelay);
|
|
P1(postdelay);
|
|
P1(cmdaddpause);
|
|
P1(datapause);
|
|
P1(tmspeed);
|
|
P1(busytimeout);
|
|
P1(disbbm);
|
|
P1(spare_offset);
|
|
#if !defined(CONFIG_MX6) || defined(CONFIG_MX6SX) || \
|
|
defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
|
|
P1(onfi_sync_enable);
|
|
P1(onfi_sync_speed);
|
|
P1(onfi_sync_nand_data);
|
|
P1(disbbm_search);
|
|
P1(disbbm_search_limit);
|
|
P1(read_retry_enable);
|
|
#endif
|
|
#undef P1
|
|
#define P1(x) printf(" %s = 0x%08x\n", #x, dbbt->x)
|
|
printf("DBBT :\n");
|
|
P1(checksum);
|
|
P1(fingerprint);
|
|
P1(version);
|
|
#undef P1
|
|
#define P1(x) printf(" %s = %d\n", #x, dbbt->x)
|
|
P1(dbbtpages);
|
|
#undef P1
|
|
|
|
for (i = 0; i < dbbt->dbbtpages; ++i)
|
|
printf("%d ", *((u32 *)(dbbt_data_page + i)));
|
|
|
|
if (!(plat_config.misc_flags & FIRMWARE_EXTRA_ONE)) {
|
|
printf("Firmware: image #0 @ 0x%x size 0x%x\n",
|
|
fcb->fw1_start, fcb->fw1_pages * mtd->writesize);
|
|
printf("Firmware: image #1 @ 0x%x size 0x%x\n",
|
|
fcb->fw2_start, fcb->fw2_pages * mtd->writesize);
|
|
} else {
|
|
printf("Firmware: image #0 @ 0x%x size 0x%x\n",
|
|
fcb->fw1_start, fcb->fw1_pages * mtd->writesize);
|
|
printf("Firmware: image #1 @ 0x%x size 0x%x\n",
|
|
fcb->fw2_start, fcb->fw2_pages * mtd->writesize);
|
|
/* TODO: Add extra image information */
|
|
}
|
|
}
|
|
|
|
static bool check_fingerprint(void *data, int fingerprint)
|
|
{
|
|
int off = 4;
|
|
|
|
return (*(int *)(data + off) == fingerprint);
|
|
}
|
|
|
|
static int fuse_secondary_boot(u32 bank, u32 word, u32 mask, u32 off)
|
|
{
|
|
int err;
|
|
u32 val;
|
|
int ret;
|
|
|
|
err = fuse_read(bank, word, &val);
|
|
if (err)
|
|
return 0;
|
|
|
|
val = (val & mask) >> off;
|
|
|
|
if (val > 10)
|
|
return 0;
|
|
|
|
switch (val) {
|
|
case 0:
|
|
ret = 4;
|
|
break;
|
|
case 1:
|
|
ret = 1;
|
|
break;
|
|
default:
|
|
ret = 2 << val;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
};
|
|
|
|
static int fuse_to_search_count(u32 bank, u32 word, u32 mask, u32 off)
|
|
{
|
|
int err;
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* by default, the boot search count from fuse should be 2 */
|
|
err = fuse_read(bank, word, &val);
|
|
if (err)
|
|
return 2;
|
|
|
|
val = (val & mask) >> off;
|
|
|
|
switch (val) {
|
|
case 0:
|
|
ret = 2;
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
ret = 1 << val;
|
|
break;
|
|
default:
|
|
ret = 2;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nandbcb_dump(struct boot_config *boot_cfg)
|
|
{
|
|
int i;
|
|
loff_t off;
|
|
struct mtd_info *mtd = boot_cfg->mtd;
|
|
struct fcb_block fcb, fcb_copy;
|
|
struct dbbt_block dbbt, dbbt_copy;
|
|
void *dbbt_data_page, *dbbt_data_page_copy;
|
|
bool fcb_not_found, dbbt_not_found;
|
|
int ret = 0;
|
|
|
|
dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL);
|
|
if (!dbbt_data_page) {
|
|
printf("failed to allocate dbbt_data_page\n");
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
dbbt_data_page_copy = kzalloc(mtd->writesize, GFP_KERNEL);
|
|
if (!dbbt_data_page_copy) {
|
|
printf("failed to allocate dbbt_data_page\n");
|
|
ret = -ENOMEM;
|
|
goto dbbt_page_err;
|
|
}
|
|
|
|
/* read fcb */
|
|
fcb_not_found = 1;
|
|
off = 0;
|
|
for (i = 0; i < g_boot_search_count; ++i) {
|
|
if (fcb_not_found) {
|
|
ret = read_fcb(boot_cfg, &fcb, off);
|
|
|
|
if (ret < 0)
|
|
goto dbbt_page_copy_err;
|
|
else if (ret == 1)
|
|
continue;
|
|
else if (ret == 0)
|
|
if (check_fingerprint(&fcb, FCB_FINGERPRINT))
|
|
fcb_not_found = 0;
|
|
} else {
|
|
ret = read_fcb(boot_cfg, &fcb_copy, off);
|
|
|
|
if (ret < 0)
|
|
goto dbbt_page_copy_err;
|
|
if (memcmp(&fcb, &fcb_copy,
|
|
sizeof(struct fcb_block))) {
|
|
printf("FCB copies are not identical\n");
|
|
ret = -EINVAL;
|
|
goto dbbt_page_copy_err;
|
|
}
|
|
}
|
|
|
|
/* next read location */
|
|
off += g_boot_search_stride;
|
|
}
|
|
|
|
/* read dbbt*/
|
|
dbbt_not_found = 1;
|
|
off = boot_cfg->search_area_size_in_bytes;
|
|
for (i = 0; i < g_boot_search_count; ++i) {
|
|
if (dbbt_not_found) {
|
|
ret = read_dbbt(boot_cfg, &dbbt, dbbt_data_page, off);
|
|
|
|
if (ret < 0)
|
|
goto dbbt_page_copy_err;
|
|
else if (ret == 1)
|
|
continue;
|
|
else if (ret == 0)
|
|
if (check_fingerprint(&dbbt, DBBT_FINGERPRINT))
|
|
dbbt_not_found = 0;
|
|
} else {
|
|
ret = read_dbbt(boot_cfg, &dbbt_copy,
|
|
dbbt_data_page_copy, off);
|
|
|
|
if (ret < 0)
|
|
goto dbbt_page_copy_err;
|
|
if (memcmp(&dbbt, &dbbt_copy,
|
|
sizeof(struct dbbt_block))) {
|
|
printf("DBBT copies are not identical\n");
|
|
ret = -EINVAL;
|
|
goto dbbt_page_copy_err;
|
|
}
|
|
if (dbbt.dbbtpages > 0 &&
|
|
memcmp(dbbt_data_page, dbbt_data_page_copy,
|
|
mtd->writesize)) {
|
|
printf("DBBT data copies are not identical\n");
|
|
ret = -EINVAL;
|
|
goto dbbt_page_copy_err;
|
|
}
|
|
}
|
|
|
|
/* next read location */
|
|
off += g_boot_search_stride;
|
|
}
|
|
|
|
dump_structure(boot_cfg, &fcb, &dbbt, dbbt_data_page);
|
|
|
|
dbbt_page_copy_err:
|
|
kfree(dbbt_data_page_copy);
|
|
dbbt_page_err:
|
|
kfree(dbbt_data_page);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int do_nandbcb_dump(int argc, char * const argv[])
|
|
{
|
|
struct boot_config cfg;
|
|
int ret;
|
|
|
|
if (argc != 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
memset(&cfg, 0, sizeof(struct boot_config));
|
|
if (nandbcb_get_info(argc, argv, &cfg))
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (nandbcb_get_size(argc, argv, 1, &cfg))
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (nandbcb_set_boot_config(argc, argv, &cfg))
|
|
return CMD_RET_FAILURE;
|
|
|
|
ret = nandbcb_dump(&cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int do_nandbcb_init(int argc, char * const argv[])
|
|
{
|
|
u_char *buf;
|
|
size_t size;
|
|
loff_t addr;
|
|
char *endp;
|
|
int ret;
|
|
struct boot_config cfg;
|
|
|
|
if (argc != 4)
|
|
return CMD_RET_USAGE;
|
|
|
|
memset(&cfg, 0, sizeof(struct boot_config));
|
|
if (nandbcb_get_info(argc, argv, &cfg))
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (nandbcb_get_size(argc, argv, 2, &cfg))
|
|
return CMD_RET_FAILURE;
|
|
size = cfg.boot_stream1_size;
|
|
|
|
if (nandbcb_set_boot_config(argc, argv, &cfg))
|
|
return CMD_RET_FAILURE;
|
|
|
|
addr = hextoul(argv[1], &endp);
|
|
if (*argv[1] == 0 || *endp != 0)
|
|
return CMD_RET_FAILURE;
|
|
|
|
buf = map_physmem(addr, size, MAP_WRBACK);
|
|
if (!buf) {
|
|
puts("failed to map physical memory\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
ret = nandbcb_init(&cfg, buf);
|
|
|
|
return ret == 0 ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
|
|
}
|
|
|
|
static int do_nandbcb(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
char *const argv[])
|
|
{
|
|
const char *cmd;
|
|
int ret = 0;
|
|
|
|
if (argc < 3)
|
|
goto usage;
|
|
|
|
/* check the platform config first */
|
|
if (is_mx6sx()) {
|
|
plat_config = imx6sx_plat_config;
|
|
} else if (is_mx7()) {
|
|
plat_config = imx7d_plat_config;
|
|
} else if (is_mx6ul() || is_mx6ull()) {
|
|
plat_config = imx6ul_plat_config;
|
|
} else if (is_mx6() && !is_mx6sx() && !is_mx6ul() && !is_mx6ull()) {
|
|
plat_config = imx6qdl_plat_config;
|
|
} else if (is_imx8mq()) {
|
|
plat_config = imx8mq_plat_config;
|
|
} else if (is_imx8mm()) {
|
|
plat_config = imx8mm_plat_config;
|
|
} else if (is_imx8mn() || is_imx8mp()) {
|
|
plat_config = imx8mn_plat_config;
|
|
} else if (is_imx8qm() || is_imx8qxp()) {
|
|
plat_config = imx8q_plat_config;
|
|
} else {
|
|
printf("ERROR: Unknown platform\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if ((plat_config.misc_flags) & BT_SEARCH_CNT_FROM_FUSE) {
|
|
if (is_imx8qxp())
|
|
g_boot_search_count = fuse_to_search_count(0, 720, 0xc0, 6);
|
|
if (is_imx8mn() || is_imx8mp())
|
|
g_boot_search_count = fuse_to_search_count(2, 2, 0x6000, 13);
|
|
printf("search count set to %d from fuse\n",
|
|
g_boot_search_count);
|
|
}
|
|
|
|
if (plat_config.misc_flags & FIRMWARE_SECONDARY_FIXED_ADDR) {
|
|
if (is_imx8mn())
|
|
g_boot_secondary_offset = fuse_secondary_boot(2, 1, 0xff0000, 16);
|
|
}
|
|
|
|
cmd = argv[1];
|
|
--argc;
|
|
++argv;
|
|
|
|
if (strcmp(cmd, "init") == 0) {
|
|
ret = do_nandbcb_init(argc, argv);
|
|
goto done;
|
|
}
|
|
|
|
if (strcmp(cmd, "dump") == 0) {
|
|
ret = do_nandbcb_dump(argc, argv);
|
|
goto done;
|
|
}
|
|
|
|
if (strcmp(cmd, "bcbonly") == 0) {
|
|
ret = do_nandbcb_bcbonly(argc, argv);
|
|
goto done;
|
|
}
|
|
|
|
done:
|
|
if (ret != -1)
|
|
return ret;
|
|
usage:
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_LONGHELP
|
|
static char nandbcb_help_text[] =
|
|
"init addr off|partition len - update 'len' bytes starting at\n"
|
|
" 'off|part' to memory address 'addr', skipping bad blocks\n"
|
|
"nandbcb bcbonly off|partition fw1-off fw1-size [fw2-off fw2-size]\n"
|
|
" - write BCB only (FCB and DBBT)\n"
|
|
" where `fwx-size` is fw sizes in bytes, `fw1-off`\n"
|
|
" and `fw2-off` - firmware offsets\n"
|
|
" FIY, BCB isn't erased automatically, so mtd erase should\n"
|
|
" be called in advance before writing new BCB:\n"
|
|
" > mtd erase mx7-bcb\n"
|
|
"nandbcb dump off|partition - dump/verify boot structures\n";
|
|
#endif
|
|
|
|
U_BOOT_CMD(nandbcb, 7, 1, do_nandbcb,
|
|
"i.MX NAND Boot Control Blocks write",
|
|
nandbcb_help_text
|
|
);
|