mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-24 20:13:39 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
244 lines
5.5 KiB
C
244 lines
5.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
|
|
*
|
|
* Original Author Guenter Gebhardt
|
|
* Copyright (C) 2006 Micronas GmbH
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/errno.h>
|
|
|
|
#include "vct.h"
|
|
|
|
int dcgu_set_clk_switch(enum dcgu_hw_module module, enum dcgu_switch setup)
|
|
{
|
|
u32 enable;
|
|
union dcgu_clk_en1 en1;
|
|
union dcgu_clk_en2 en2;
|
|
|
|
switch (setup) {
|
|
case DCGU_SWITCH_ON:
|
|
enable = 1;
|
|
break;
|
|
case DCGU_SWITCH_OFF:
|
|
enable = 0;
|
|
break;
|
|
default:
|
|
printf("%s:%i:Invalid clock switch: %i\n", __FILE__, __LINE__,
|
|
setup);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (module == DCGU_HW_MODULE_CPU)
|
|
en2.reg = reg_read(DCGU_CLK_EN2(DCGU_BASE));
|
|
else
|
|
en1.reg = reg_read(DCGU_CLK_EN1(DCGU_BASE));
|
|
|
|
switch (module) {
|
|
case DCGU_HW_MODULE_MSMC:
|
|
en1.bits.en_clkmsmc = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_SSI_S:
|
|
en1.bits.en_clkssi_s = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_SSI_M:
|
|
en1.bits.en_clkssi_m = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_SMC:
|
|
en1.bits.en_clksmc = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_EBI:
|
|
en1.bits.en_clkebi = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_USB_PLL:
|
|
en1.bits.en_usbpll = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_USB_60:
|
|
en1.bits.en_clkusb60 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_USB_24:
|
|
en1.bits.en_clkusb24 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_UART_2:
|
|
en1.bits.en_clkuart2 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_UART_1:
|
|
en1.bits.en_clkuart1 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_PERI:
|
|
en1.bits.en_clkperi20 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_CPU:
|
|
en2.bits.en_clkcpu = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_I2S:
|
|
en1.bits.en_clk_i2s_dly = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_ABP_SCC:
|
|
en1.bits.en_clk_scc_abp = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_SPDIF:
|
|
en1.bits.en_clk_dtv_spdo = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_AD:
|
|
en1.bits.en_clkad = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_MVD:
|
|
en1.bits.en_clkmvd = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_TSD:
|
|
en1.bits.en_clktsd = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_GA:
|
|
en1.bits.en_clkga = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_DVP:
|
|
en1.bits.en_clkdvp = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_MR2:
|
|
en1.bits.en_clkmr2 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_MR1:
|
|
en1.bits.en_clkmr1 = enable;
|
|
break;
|
|
default:
|
|
printf("%s:%i:Invalid hardware module: %i\n", __FILE__,
|
|
__LINE__, module);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* The reg_read() following the reg_write() below forces the write to
|
|
* be really done on the bus.
|
|
* Otherwise the clock may not be switched on when this API function
|
|
* returns, which may cause an bus error if a registers of the hardware
|
|
* module connected to the clock is accessed.
|
|
*/
|
|
if (module == DCGU_HW_MODULE_CPU) {
|
|
reg_write(DCGU_CLK_EN2(DCGU_BASE), en2.reg);
|
|
en2.reg = reg_read(DCGU_CLK_EN2(DCGU_BASE));
|
|
} else {
|
|
reg_write(DCGU_CLK_EN1(DCGU_BASE), en1.reg);
|
|
en1.reg = reg_read(DCGU_CLK_EN1(DCGU_BASE));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dcgu_set_reset_switch(enum dcgu_hw_module module, enum dcgu_switch setup)
|
|
{
|
|
union dcgu_reset_unit1 val;
|
|
u32 enable;
|
|
|
|
switch (setup) {
|
|
case DCGU_SWITCH_ON:
|
|
enable = 1;
|
|
break;
|
|
case DCGU_SWITCH_OFF:
|
|
enable = 0;
|
|
break;
|
|
default:
|
|
printf("%s:%i:Invalid reset switch: %i\n", __FILE__, __LINE__,
|
|
setup);
|
|
return -EINVAL;
|
|
}
|
|
|
|
val.reg = reg_read(DCGU_RESET_UNIT1(DCGU_BASE));
|
|
switch (module) {
|
|
case DCGU_HW_MODULE_MSMC:
|
|
val.bits.swreset_clkmsmc = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_SSI_S:
|
|
val.bits.swreset_clkssi_s = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_SSI_M:
|
|
val.bits.swreset_clkssi_m = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_SMC:
|
|
val.bits.swreset_clksmc = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_EBI:
|
|
val.bits.swreset_clkebi = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_USB_60:
|
|
val.bits.swreset_clkusb60 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_USB_24:
|
|
val.bits.swreset_clkusb24 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_UART_2:
|
|
val.bits.swreset_clkuart2 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_UART_1:
|
|
val.bits.swreset_clkuart1 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_PWM:
|
|
val.bits.swreset_pwm = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_GPT:
|
|
val.bits.swreset_gpt = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_I2C2:
|
|
val.bits.swreset_i2c2 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_I2C1:
|
|
val.bits.swreset_i2c1 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_GPIO2:
|
|
val.bits.swreset_gpio2 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_GPIO1:
|
|
val.bits.swreset_gpio1 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_CPU:
|
|
val.bits.swreset_clkcpu = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_I2S:
|
|
val.bits.swreset_clk_i2s_dly = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_ABP_SCC:
|
|
val.bits.swreset_clk_scc_abp = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_SPDIF:
|
|
val.bits.swreset_clk_dtv_spdo = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_AD:
|
|
val.bits.swreset_clkad = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_MVD:
|
|
val.bits.swreset_clkmvd = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_TSD:
|
|
val.bits.swreset_clktsd = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_TSIO:
|
|
val.bits.swreset_clktsio = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_GA:
|
|
val.bits.swreset_clkga = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_MPC:
|
|
val.bits.swreset_clkmpc = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_CVE:
|
|
val.bits.swreset_clkcve = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_DVP:
|
|
val.bits.swreset_clkdvp = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_MR2:
|
|
val.bits.swreset_clkmr2 = enable;
|
|
break;
|
|
case DCGU_HW_MODULE_MR1:
|
|
val.bits.swreset_clkmr1 = enable;
|
|
break;
|
|
default:
|
|
printf("%s:%i:Invalid hardware module: %i\n", __FILE__,
|
|
__LINE__, module);
|
|
return -EINVAL;
|
|
}
|
|
reg_write(DCGU_RESET_UNIT1(DCGU_BASE), val.reg);
|
|
|
|
return 0;
|
|
}
|