mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
1099 lines
29 KiB
C
1099 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
#include <asm/mach-imx/spi.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <i2c.h>
|
|
#include <input.h>
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
#include <asm/mach-imx/video.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <pca953x.h>
|
|
#include <power/pmic.h>
|
|
#include <power/pfuze100_pmic.h>
|
|
#include "../common/pfuze.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
|
|
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
|
|
|
#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
|
|
#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_SRE_FAST)
|
|
#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
|
|
|
|
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
|
|
|
#define WEIM_NOR_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
|
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
|
|
|
|
#define I2C_PMIC 1
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = imx_ddr_size();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static iomux_v3_cfg_t const uart4_pads[] = {
|
|
IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const enet_pads[] = {
|
|
IOMUX_PADS(PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
};
|
|
|
|
/* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */
|
|
static struct i2c_pads_info mx6q_i2c_pad_info1 = {
|
|
.scl = {
|
|
.i2c_mode = MX6Q_PAD_EIM_EB2__I2C2_SCL | PC,
|
|
.gpio_mode = MX6Q_PAD_EIM_EB2__GPIO2_IO30 | PC,
|
|
.gp = IMX_GPIO_NR(2, 30)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
|
|
.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
|
|
.gp = IMX_GPIO_NR(4, 13)
|
|
}
|
|
};
|
|
|
|
static struct i2c_pads_info mx6dl_i2c_pad_info1 = {
|
|
.scl = {
|
|
.i2c_mode = MX6DL_PAD_EIM_EB2__I2C2_SCL | PC,
|
|
.gpio_mode = MX6DL_PAD_EIM_EB2__GPIO2_IO30 | PC,
|
|
.gp = IMX_GPIO_NR(2, 30)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
|
|
.gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
|
|
.gp = IMX_GPIO_NR(4, 13)
|
|
}
|
|
};
|
|
|
|
#ifndef CONFIG_SYS_FLASH_CFI
|
|
/*
|
|
* I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
|
|
* Compass Sensor, Accelerometer, Res Touch
|
|
*/
|
|
static struct i2c_pads_info mx6q_i2c_pad_info2 = {
|
|
.scl = {
|
|
.i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
|
|
.gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
|
|
.gp = IMX_GPIO_NR(1, 3)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6Q_PAD_EIM_D18__I2C3_SDA | PC,
|
|
.gpio_mode = MX6Q_PAD_EIM_D18__GPIO3_IO18 | PC,
|
|
.gp = IMX_GPIO_NR(3, 18)
|
|
}
|
|
};
|
|
|
|
static struct i2c_pads_info mx6dl_i2c_pad_info2 = {
|
|
.scl = {
|
|
.i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
|
|
.gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
|
|
.gp = IMX_GPIO_NR(1, 3)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6DL_PAD_EIM_D18__I2C3_SDA | PC,
|
|
.gpio_mode = MX6DL_PAD_EIM_D18__GPIO3_IO18 | PC,
|
|
.gp = IMX_GPIO_NR(3, 18)
|
|
}
|
|
};
|
|
#endif
|
|
|
|
static iomux_v3_cfg_t const i2c3_pads[] = {
|
|
IOMUX_PADS(PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
};
|
|
|
|
static iomux_v3_cfg_t const port_exp[] = {
|
|
IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
};
|
|
|
|
/*Define for building port exp gpio, pin starts from 0*/
|
|
#define PORTEXP_IO_NR(chip, pin) \
|
|
((chip << 5) + pin)
|
|
|
|
/*Get the chip addr from a ioexp gpio*/
|
|
#define PORTEXP_IO_TO_CHIP(gpio_nr) \
|
|
(gpio_nr >> 5)
|
|
|
|
/*Get the pin number from a ioexp gpio*/
|
|
#define PORTEXP_IO_TO_PIN(gpio_nr) \
|
|
(gpio_nr & 0x1f)
|
|
|
|
static int port_exp_direction_output(unsigned gpio, int value)
|
|
{
|
|
int ret;
|
|
|
|
i2c_set_bus_num(2);
|
|
ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio),
|
|
(1 << PORTEXP_IO_TO_PIN(gpio)),
|
|
(PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio)));
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio),
|
|
(1 << PORTEXP_IO_TO_PIN(gpio)),
|
|
(value << PORTEXP_IO_TO_PIN(gpio)));
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_NOR_FLASH
|
|
static iomux_v3_cfg_t const eimnor_pads[] = {
|
|
IOMUX_PADS(PAD_EIM_D16__EIM_DATA16 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D17__EIM_DATA17 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D18__EIM_DATA18 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D19__EIM_DATA19 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D20__EIM_DATA20 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D21__EIM_DATA21 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D22__EIM_DATA22 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D23__EIM_DATA23 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D24__EIM_DATA24 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D25__EIM_DATA25 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D26__EIM_DATA26 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D27__EIM_DATA27 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D28__EIM_DATA28 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D29__EIM_DATA29 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D30__EIM_DATA30 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_D31__EIM_DATA31 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA0__EIM_AD00 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA1__EIM_AD01 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA2__EIM_AD02 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA3__EIM_AD03 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA4__EIM_AD04 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA5__EIM_AD05 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA6__EIM_AD06 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA7__EIM_AD07 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA8__EIM_AD08 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA9__EIM_AD09 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA10__EIM_AD10 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA11__EIM_AD11 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA12__EIM_AD12 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA13__EIM_AD13 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA14__EIM_AD14 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_DA15__EIM_AD15 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A16__EIM_ADDR16 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A17__EIM_ADDR17 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A18__EIM_ADDR18 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A19__EIM_ADDR19 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A20__EIM_ADDR20 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A21__EIM_ADDR21 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A22__EIM_ADDR22 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_A23__EIM_ADDR23 | MUX_PAD_CTRL(WEIM_NOR_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_OE__EIM_OE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_RW__EIM_RW | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_EIM_CS0__EIM_CS0_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
};
|
|
|
|
static void eimnor_cs_setup(void)
|
|
{
|
|
struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
|
|
|
|
writel(0x00020181, &weim_regs->cs0gcr1);
|
|
writel(0x00000001, &weim_regs->cs0gcr2);
|
|
writel(0x0a020000, &weim_regs->cs0rcr1);
|
|
writel(0x0000c000, &weim_regs->cs0rcr2);
|
|
writel(0x0804a240, &weim_regs->cs0wcr1);
|
|
writel(0x00000120, &weim_regs->wcr);
|
|
|
|
set_chipselect_size(CS0_128);
|
|
}
|
|
|
|
static void eim_clk_setup(void)
|
|
{
|
|
struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
int cscmr1, ccgr6;
|
|
|
|
|
|
/* Turn off EIM clock */
|
|
ccgr6 = readl(&imx_ccm->CCGR6);
|
|
ccgr6 &= ~(0x3 << 10);
|
|
writel(ccgr6, &imx_ccm->CCGR6);
|
|
|
|
/*
|
|
* Configure clk_eim_slow_sel = 00 --> derive clock from AXI clk root
|
|
* and aclk_eim_slow_podf = 01 --> divide by 2
|
|
* so that we can have EIM at the maximum clock of 132MHz
|
|
*/
|
|
cscmr1 = readl(&imx_ccm->cscmr1);
|
|
cscmr1 &= ~(MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK |
|
|
MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK);
|
|
cscmr1 |= (1 << MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET);
|
|
writel(cscmr1, &imx_ccm->cscmr1);
|
|
|
|
/* Turn on EIM clock */
|
|
ccgr6 |= (0x3 << 10);
|
|
writel(ccgr6, &imx_ccm->CCGR6);
|
|
}
|
|
|
|
static void setup_iomux_eimnor(void)
|
|
{
|
|
SETUP_IOMUX_PADS(eimnor_pads);
|
|
|
|
gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
|
|
|
|
eimnor_cs_setup();
|
|
}
|
|
#endif
|
|
|
|
static void setup_iomux_enet(void)
|
|
{
|
|
SETUP_IOMUX_PADS(enet_pads);
|
|
}
|
|
|
|
static iomux_v3_cfg_t const usdhc3_pads[] = {
|
|
IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_GPIO_18__SD3_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
};
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
SETUP_IOMUX_PADS(uart4_pads);
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
static struct fsl_esdhc_cfg usdhc_cfg[1] = {
|
|
{USDHC3_BASE_ADDR},
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
gpio_direction_input(IMX_GPIO_NR(6, 15));
|
|
return !gpio_get_value(IMX_GPIO_NR(6, 15));
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
SETUP_IOMUX_PADS(usdhc3_pads);
|
|
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_MXS
|
|
static iomux_v3_cfg_t gpmi_pads[] = {
|
|
IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL0)),
|
|
IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
|
|
IOMUX_PADS(PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(GPMI_PAD_CTRL1)),
|
|
};
|
|
|
|
static void setup_gpmi_nand(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
/* config gpmi nand iomux */
|
|
SETUP_IOMUX_PADS(gpmi_pads);
|
|
|
|
setup_gpmi_io_clk((MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
|
|
MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
|
|
MXC_CCM_CS2CDR_ENFC_CLK_SEL(3)));
|
|
|
|
/* enable apbh clock gating */
|
|
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
|
|
}
|
|
#endif
|
|
|
|
static void setup_fec(void)
|
|
{
|
|
if (is_mx6dqp()) {
|
|
/*
|
|
* select ENET MAC0 TX clock from PLL
|
|
*/
|
|
imx_iomux_set_gpr_register(5, 9, 1, 1);
|
|
enable_fec_anatop_clock(0, ENET_125MHZ);
|
|
}
|
|
|
|
setup_iomux_enet();
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
setup_fec();
|
|
|
|
return cpu_eth_init(bis);
|
|
}
|
|
|
|
u32 get_board_rev(void)
|
|
{
|
|
int rev = nxp_board_rev();
|
|
|
|
return (get_cpu_rev() & ~(0xF << 8)) | rev;
|
|
}
|
|
|
|
static int ar8031_phy_fixup(struct phy_device *phydev)
|
|
{
|
|
unsigned short val;
|
|
|
|
/* To enable AR8031 ouput a 125MHz clk from CLK_25M */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
|
|
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
|
|
val &= 0xffe3;
|
|
val |= 0x18;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
|
|
|
|
/* introduce tx clock delay */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
|
|
val |= 0x0100;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
ar8031_phy_fixup(phydev);
|
|
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_VIDEO_IPUV3)
|
|
static void disable_lvds(struct display_info_t const *dev)
|
|
{
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
clrbits_le32(&iomux->gpr[2],
|
|
IOMUXC_GPR2_LVDS_CH0_MODE_MASK |
|
|
IOMUXC_GPR2_LVDS_CH1_MODE_MASK);
|
|
}
|
|
|
|
static void do_enable_hdmi(struct display_info_t const *dev)
|
|
{
|
|
disable_lvds(dev);
|
|
imx_enable_hdmi_phy();
|
|
}
|
|
|
|
struct display_info_t const displays[] = {{
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB666,
|
|
.detect = NULL,
|
|
.enable = NULL,
|
|
.mode = {
|
|
.name = "Hannstar-XGA",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 768,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.detect = detect_hdmi,
|
|
.enable = do_enable_hdmi,
|
|
.mode = {
|
|
.name = "HDMI",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 768,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
} } };
|
|
size_t display_count = ARRAY_SIZE(displays);
|
|
|
|
iomux_v3_cfg_t const backlight_pads[] = {
|
|
IOMUX_PADS(PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
|
|
};
|
|
|
|
static void setup_iomux_backlight(void)
|
|
{
|
|
gpio_direction_output(IMX_GPIO_NR(2, 9), 1);
|
|
SETUP_IOMUX_PADS(backlight_pads);
|
|
}
|
|
|
|
static void setup_display(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
int reg;
|
|
|
|
setup_iomux_backlight();
|
|
enable_ipu_clock();
|
|
imx_setup_hdmi();
|
|
|
|
/* Turn on LDB_DI0 and LDB_DI1 clocks */
|
|
reg = readl(&mxc_ccm->CCGR3);
|
|
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK;
|
|
writel(reg, &mxc_ccm->CCGR3);
|
|
|
|
/* Set LDB_DI0 and LDB_DI1 clk select to 3b'011 */
|
|
reg = readl(&mxc_ccm->cs2cdr);
|
|
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK |
|
|
MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
|
|
reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) |
|
|
(3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
|
|
writel(reg, &mxc_ccm->cs2cdr);
|
|
|
|
reg = readl(&mxc_ccm->cscmr2);
|
|
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV;
|
|
writel(reg, &mxc_ccm->cscmr2);
|
|
|
|
reg = readl(&mxc_ccm->chsccdr);
|
|
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
|
|
<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
|
|
reg |= (CHSCCDR_CLK_SEL_LDB_DI0 <<
|
|
MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET);
|
|
writel(reg, &mxc_ccm->chsccdr);
|
|
|
|
reg = IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW |
|
|
IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
|
|
IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG |
|
|
IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT |
|
|
IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
|
|
IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT |
|
|
IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0 |
|
|
IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED;
|
|
writel(reg, &iomux->gpr[2]);
|
|
|
|
reg = readl(&iomux->gpr[3]);
|
|
reg &= ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
|
|
IOMUXC_GPR3_HDMI_MUX_CTL_MASK);
|
|
reg |= (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
|
|
IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET) |
|
|
(IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
|
|
IOMUXC_GPR3_HDMI_MUX_CTL_OFFSET);
|
|
writel(reg, &iomux->gpr[3]);
|
|
}
|
|
#endif /* CONFIG_VIDEO_IPUV3 */
|
|
|
|
/*
|
|
* Do not overwrite the console
|
|
* Use always serial for U-Boot console
|
|
*/
|
|
int overwrite_console(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
setup_iomux_uart();
|
|
|
|
#ifdef CONFIG_NAND_MXS
|
|
setup_gpmi_nand();
|
|
#endif
|
|
|
|
#ifdef CONFIG_MTD_NOR_FLASH
|
|
eim_clk_setup();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
/* I2C 2 and 3 setup - I2C 3 hw mux with EIM */
|
|
if (is_mx6dq() || is_mx6dqp())
|
|
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
|
|
else
|
|
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
|
|
/* I2C 3 Steer */
|
|
gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
|
|
SETUP_IOMUX_PADS(i2c3_pads);
|
|
#ifndef CONFIG_SYS_FLASH_CFI
|
|
if (is_mx6dq() || is_mx6dqp())
|
|
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info2);
|
|
else
|
|
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2);
|
|
#endif
|
|
gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
|
|
SETUP_IOMUX_PADS(port_exp);
|
|
|
|
#ifdef CONFIG_VIDEO_IPUV3
|
|
setup_display();
|
|
#endif
|
|
|
|
#ifdef CONFIG_MTD_NOR_FLASH
|
|
setup_iomux_eimnor();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_MXC_SPI
|
|
int board_spi_cs_gpio(unsigned bus, unsigned cs)
|
|
{
|
|
return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1;
|
|
}
|
|
#endif
|
|
|
|
int power_init_board(void)
|
|
{
|
|
struct pmic *p;
|
|
unsigned int value;
|
|
|
|
p = pfuze_common_init(I2C_PMIC);
|
|
if (!p)
|
|
return -ENODEV;
|
|
|
|
if (is_mx6dqp()) {
|
|
/* set SW2 staby volatage 0.975V*/
|
|
pmic_reg_read(p, PFUZE100_SW2STBY, &value);
|
|
value &= ~0x3f;
|
|
value |= 0x17;
|
|
pmic_reg_write(p, PFUZE100_SW2STBY, value);
|
|
}
|
|
|
|
return pfuze_mode_init(p, APS_PFM);
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_BMODE
|
|
static const struct boot_mode board_boot_modes[] = {
|
|
/* 4 bit bus width */
|
|
{"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
|
|
{NULL, 0},
|
|
};
|
|
#endif
|
|
|
|
int board_late_init(void)
|
|
{
|
|
#ifdef CONFIG_CMD_BMODE
|
|
add_board_boot_modes(board_boot_modes);
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
env_set("board_name", "SABREAUTO");
|
|
|
|
if (is_mx6dqp())
|
|
env_set("board_rev", "MX6QP");
|
|
else if (is_mx6dq())
|
|
env_set("board_rev", "MX6Q");
|
|
else if (is_mx6sdl())
|
|
env_set("board_rev", "MX6DL");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: MX6Q-Sabreauto rev%c\n", nxp_board_rev_string());
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_EHCI_MX6
|
|
#define USB_HOST1_PWR PORTEXP_IO_NR(0x32, 7)
|
|
#define USB_OTG_PWR PORTEXP_IO_NR(0x34, 1)
|
|
|
|
iomux_v3_cfg_t const usb_otg_pads[] = {
|
|
IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
|
|
};
|
|
|
|
int board_ehci_hcd_init(int port)
|
|
{
|
|
switch (port) {
|
|
case 0:
|
|
SETUP_IOMUX_PADS(usb_otg_pads);
|
|
|
|
/*
|
|
* Set daisy chain for otg_pin_id on 6q.
|
|
* For 6dl, this bit is reserved.
|
|
*/
|
|
imx_iomux_set_gpr_register(1, 13, 1, 0);
|
|
break;
|
|
case 1:
|
|
break;
|
|
default:
|
|
printf("MXC USB port %d not yet supported\n", port);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int board_ehci_power(int port, int on)
|
|
{
|
|
switch (port) {
|
|
case 0:
|
|
if (on)
|
|
port_exp_direction_output(USB_OTG_PWR, 1);
|
|
else
|
|
port_exp_direction_output(USB_OTG_PWR, 0);
|
|
break;
|
|
case 1:
|
|
if (on)
|
|
port_exp_direction_output(USB_HOST1_PWR, 1);
|
|
else
|
|
port_exp_direction_output(USB_HOST1_PWR, 0);
|
|
break;
|
|
default:
|
|
printf("MXC USB port %d not yet supported\n", port);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#include <asm/arch/mx6-ddr.h>
|
|
#include <spl.h>
|
|
#include <linux/libfdt.h>
|
|
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
int spl_start_uboot(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void ccgr_init(void)
|
|
{
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
writel(0x00C03F3F, &ccm->CCGR0);
|
|
writel(0x0030FC03, &ccm->CCGR1);
|
|
writel(0x0FFFC000, &ccm->CCGR2);
|
|
writel(0x3FF00000, &ccm->CCGR3);
|
|
writel(0x00FFF300, &ccm->CCGR4);
|
|
writel(0x0F0000C3, &ccm->CCGR5);
|
|
writel(0x000003FF, &ccm->CCGR6);
|
|
}
|
|
|
|
static int mx6q_dcd_table[] = {
|
|
0x020e0798, 0x000C0000,
|
|
0x020e0758, 0x00000000,
|
|
0x020e0588, 0x00000030,
|
|
0x020e0594, 0x00000030,
|
|
0x020e056c, 0x00000030,
|
|
0x020e0578, 0x00000030,
|
|
0x020e074c, 0x00000030,
|
|
0x020e057c, 0x00000030,
|
|
0x020e058c, 0x00000000,
|
|
0x020e059c, 0x00000030,
|
|
0x020e05a0, 0x00000030,
|
|
0x020e078c, 0x00000030,
|
|
0x020e0750, 0x00020000,
|
|
0x020e05a8, 0x00000028,
|
|
0x020e05b0, 0x00000028,
|
|
0x020e0524, 0x00000028,
|
|
0x020e051c, 0x00000028,
|
|
0x020e0518, 0x00000028,
|
|
0x020e050c, 0x00000028,
|
|
0x020e05b8, 0x00000028,
|
|
0x020e05c0, 0x00000028,
|
|
0x020e0774, 0x00020000,
|
|
0x020e0784, 0x00000028,
|
|
0x020e0788, 0x00000028,
|
|
0x020e0794, 0x00000028,
|
|
0x020e079c, 0x00000028,
|
|
0x020e07a0, 0x00000028,
|
|
0x020e07a4, 0x00000028,
|
|
0x020e07a8, 0x00000028,
|
|
0x020e0748, 0x00000028,
|
|
0x020e05ac, 0x00000028,
|
|
0x020e05b4, 0x00000028,
|
|
0x020e0528, 0x00000028,
|
|
0x020e0520, 0x00000028,
|
|
0x020e0514, 0x00000028,
|
|
0x020e0510, 0x00000028,
|
|
0x020e05bc, 0x00000028,
|
|
0x020e05c4, 0x00000028,
|
|
0x021b0800, 0xa1390003,
|
|
0x021b080c, 0x001F001F,
|
|
0x021b0810, 0x001F001F,
|
|
0x021b480c, 0x001F001F,
|
|
0x021b4810, 0x001F001F,
|
|
0x021b083c, 0x43260335,
|
|
0x021b0840, 0x031A030B,
|
|
0x021b483c, 0x4323033B,
|
|
0x021b4840, 0x0323026F,
|
|
0x021b0848, 0x483D4545,
|
|
0x021b4848, 0x44433E48,
|
|
0x021b0850, 0x41444840,
|
|
0x021b4850, 0x4835483E,
|
|
0x021b081c, 0x33333333,
|
|
0x021b0820, 0x33333333,
|
|
0x021b0824, 0x33333333,
|
|
0x021b0828, 0x33333333,
|
|
0x021b481c, 0x33333333,
|
|
0x021b4820, 0x33333333,
|
|
0x021b4824, 0x33333333,
|
|
0x021b4828, 0x33333333,
|
|
0x021b08b8, 0x00000800,
|
|
0x021b48b8, 0x00000800,
|
|
0x021b0004, 0x00020036,
|
|
0x021b0008, 0x09444040,
|
|
0x021b000c, 0x8A8F7955,
|
|
0x021b0010, 0xFF328F64,
|
|
0x021b0014, 0x01FF00DB,
|
|
0x021b0018, 0x00001740,
|
|
0x021b001c, 0x00008000,
|
|
0x021b002c, 0x000026d2,
|
|
0x021b0030, 0x008F1023,
|
|
0x021b0040, 0x00000047,
|
|
0x021b0000, 0x841A0000,
|
|
0x021b001c, 0x04088032,
|
|
0x021b001c, 0x00008033,
|
|
0x021b001c, 0x00048031,
|
|
0x021b001c, 0x09408030,
|
|
0x021b001c, 0x04008040,
|
|
0x021b0020, 0x00005800,
|
|
0x021b0818, 0x00011117,
|
|
0x021b4818, 0x00011117,
|
|
0x021b0004, 0x00025576,
|
|
0x021b0404, 0x00011006,
|
|
0x021b001c, 0x00000000,
|
|
0x020c4068, 0x00C03F3F,
|
|
0x020c406c, 0x0030FC03,
|
|
0x020c4070, 0x0FFFC000,
|
|
0x020c4074, 0x3FF00000,
|
|
0x020c4078, 0xFFFFF300,
|
|
0x020c407c, 0x0F0000F3,
|
|
0x020c4080, 0x00000FFF,
|
|
0x020e0010, 0xF00000CF,
|
|
0x020e0018, 0x007F007F,
|
|
0x020e001c, 0x007F007F,
|
|
};
|
|
|
|
static int mx6qp_dcd_table[] = {
|
|
0x020e0798, 0x000C0000,
|
|
0x020e0758, 0x00000000,
|
|
0x020e0588, 0x00000030,
|
|
0x020e0594, 0x00000030,
|
|
0x020e056c, 0x00000030,
|
|
0x020e0578, 0x00000030,
|
|
0x020e074c, 0x00000030,
|
|
0x020e057c, 0x00000030,
|
|
0x020e058c, 0x00000000,
|
|
0x020e059c, 0x00000030,
|
|
0x020e05a0, 0x00000030,
|
|
0x020e078c, 0x00000030,
|
|
0x020e0750, 0x00020000,
|
|
0x020e05a8, 0x00000030,
|
|
0x020e05b0, 0x00000030,
|
|
0x020e0524, 0x00000030,
|
|
0x020e051c, 0x00000030,
|
|
0x020e0518, 0x00000030,
|
|
0x020e050c, 0x00000030,
|
|
0x020e05b8, 0x00000030,
|
|
0x020e05c0, 0x00000030,
|
|
0x020e0774, 0x00020000,
|
|
0x020e0784, 0x00000030,
|
|
0x020e0788, 0x00000030,
|
|
0x020e0794, 0x00000030,
|
|
0x020e079c, 0x00000030,
|
|
0x020e07a0, 0x00000030,
|
|
0x020e07a4, 0x00000030,
|
|
0x020e07a8, 0x00000030,
|
|
0x020e0748, 0x00000030,
|
|
0x020e05ac, 0x00000030,
|
|
0x020e05b4, 0x00000030,
|
|
0x020e0528, 0x00000030,
|
|
0x020e0520, 0x00000030,
|
|
0x020e0514, 0x00000030,
|
|
0x020e0510, 0x00000030,
|
|
0x020e05bc, 0x00000030,
|
|
0x020e05c4, 0x00000030,
|
|
0x021b0800, 0xa1390003,
|
|
0x021b080c, 0x001b001e,
|
|
0x021b0810, 0x002e0029,
|
|
0x021b480c, 0x001b002a,
|
|
0x021b4810, 0x0019002c,
|
|
0x021b083c, 0x43240334,
|
|
0x021b0840, 0x0324031a,
|
|
0x021b483c, 0x43340344,
|
|
0x021b4840, 0x03280276,
|
|
0x021b0848, 0x44383A3E,
|
|
0x021b4848, 0x3C3C3846,
|
|
0x021b0850, 0x2e303230,
|
|
0x021b4850, 0x38283E34,
|
|
0x021b081c, 0x33333333,
|
|
0x021b0820, 0x33333333,
|
|
0x021b0824, 0x33333333,
|
|
0x021b0828, 0x33333333,
|
|
0x021b481c, 0x33333333,
|
|
0x021b4820, 0x33333333,
|
|
0x021b4824, 0x33333333,
|
|
0x021b4828, 0x33333333,
|
|
0x021b08c0, 0x24912492,
|
|
0x021b48c0, 0x24912492,
|
|
0x021b08b8, 0x00000800,
|
|
0x021b48b8, 0x00000800,
|
|
0x021b0004, 0x00020036,
|
|
0x021b0008, 0x09444040,
|
|
0x021b000c, 0x898E7955,
|
|
0x021b0010, 0xFF328F64,
|
|
0x021b0014, 0x01FF00DB,
|
|
0x021b0018, 0x00001740,
|
|
0x021b001c, 0x00008000,
|
|
0x021b002c, 0x000026d2,
|
|
0x021b0030, 0x008E1023,
|
|
0x021b0040, 0x00000047,
|
|
0x021b0400, 0x14420000,
|
|
0x021b0000, 0x841A0000,
|
|
0x00bb0008, 0x00000004,
|
|
0x00bb000c, 0x2891E41A,
|
|
0x00bb0038, 0x00000564,
|
|
0x00bb0014, 0x00000040,
|
|
0x00bb0028, 0x00000020,
|
|
0x00bb002c, 0x00000020,
|
|
0x021b001c, 0x04088032,
|
|
0x021b001c, 0x00008033,
|
|
0x021b001c, 0x00048031,
|
|
0x021b001c, 0x09408030,
|
|
0x021b001c, 0x04008040,
|
|
0x021b0020, 0x00005800,
|
|
0x021b0818, 0x00011117,
|
|
0x021b4818, 0x00011117,
|
|
0x021b0004, 0x00025576,
|
|
0x021b0404, 0x00011006,
|
|
0x021b001c, 0x00000000,
|
|
0x020c4068, 0x00C03F3F,
|
|
0x020c406c, 0x0030FC03,
|
|
0x020c4070, 0x0FFFC000,
|
|
0x020c4074, 0x3FF00000,
|
|
0x020c4078, 0xFFFFF300,
|
|
0x020c407c, 0x0F0000F3,
|
|
0x020c4080, 0x00000FFF,
|
|
0x020e0010, 0xF00000CF,
|
|
0x020e0018, 0x77177717,
|
|
0x020e001c, 0x77177717,
|
|
};
|
|
|
|
static int mx6dl_dcd_table[] = {
|
|
0x020e0774, 0x000C0000,
|
|
0x020e0754, 0x00000000,
|
|
0x020e04ac, 0x00000030,
|
|
0x020e04b0, 0x00000030,
|
|
0x020e0464, 0x00000030,
|
|
0x020e0490, 0x00000030,
|
|
0x020e074c, 0x00000030,
|
|
0x020e0494, 0x00000030,
|
|
0x020e04a0, 0x00000000,
|
|
0x020e04b4, 0x00000030,
|
|
0x020e04b8, 0x00000030,
|
|
0x020e076c, 0x00000030,
|
|
0x020e0750, 0x00020000,
|
|
0x020e04bc, 0x00000028,
|
|
0x020e04c0, 0x00000028,
|
|
0x020e04c4, 0x00000028,
|
|
0x020e04c8, 0x00000028,
|
|
0x020e04cc, 0x00000028,
|
|
0x020e04d0, 0x00000028,
|
|
0x020e04d4, 0x00000028,
|
|
0x020e04d8, 0x00000028,
|
|
0x020e0760, 0x00020000,
|
|
0x020e0764, 0x00000028,
|
|
0x020e0770, 0x00000028,
|
|
0x020e0778, 0x00000028,
|
|
0x020e077c, 0x00000028,
|
|
0x020e0780, 0x00000028,
|
|
0x020e0784, 0x00000028,
|
|
0x020e078c, 0x00000028,
|
|
0x020e0748, 0x00000028,
|
|
0x020e0470, 0x00000028,
|
|
0x020e0474, 0x00000028,
|
|
0x020e0478, 0x00000028,
|
|
0x020e047c, 0x00000028,
|
|
0x020e0480, 0x00000028,
|
|
0x020e0484, 0x00000028,
|
|
0x020e0488, 0x00000028,
|
|
0x020e048c, 0x00000028,
|
|
0x021b0800, 0xa1390003,
|
|
0x021b080c, 0x001F001F,
|
|
0x021b0810, 0x001F001F,
|
|
0x021b480c, 0x001F001F,
|
|
0x021b4810, 0x001F001F,
|
|
0x021b083c, 0x42190217,
|
|
0x021b0840, 0x017B017B,
|
|
0x021b483c, 0x4176017B,
|
|
0x021b4840, 0x015F016C,
|
|
0x021b0848, 0x4C4C4D4C,
|
|
0x021b4848, 0x4A4D4C48,
|
|
0x021b0850, 0x3F3F3F40,
|
|
0x021b4850, 0x3538382E,
|
|
0x021b081c, 0x33333333,
|
|
0x021b0820, 0x33333333,
|
|
0x021b0824, 0x33333333,
|
|
0x021b0828, 0x33333333,
|
|
0x021b481c, 0x33333333,
|
|
0x021b4820, 0x33333333,
|
|
0x021b4824, 0x33333333,
|
|
0x021b4828, 0x33333333,
|
|
0x021b08b8, 0x00000800,
|
|
0x021b48b8, 0x00000800,
|
|
0x021b0004, 0x00020025,
|
|
0x021b0008, 0x00333030,
|
|
0x021b000c, 0x676B5313,
|
|
0x021b0010, 0xB66E8B63,
|
|
0x021b0014, 0x01FF00DB,
|
|
0x021b0018, 0x00001740,
|
|
0x021b001c, 0x00008000,
|
|
0x021b002c, 0x000026d2,
|
|
0x021b0030, 0x006B1023,
|
|
0x021b0040, 0x00000047,
|
|
0x021b0000, 0x841A0000,
|
|
0x021b001c, 0x04008032,
|
|
0x021b001c, 0x00008033,
|
|
0x021b001c, 0x00048031,
|
|
0x021b001c, 0x05208030,
|
|
0x021b001c, 0x04008040,
|
|
0x021b0020, 0x00005800,
|
|
0x021b0818, 0x00011117,
|
|
0x021b4818, 0x00011117,
|
|
0x021b0004, 0x00025565,
|
|
0x021b0404, 0x00011006,
|
|
0x021b001c, 0x00000000,
|
|
0x020c4068, 0x00C03F3F,
|
|
0x020c406c, 0x0030FC03,
|
|
0x020c4070, 0x0FFFC000,
|
|
0x020c4074, 0x3FF00000,
|
|
0x020c4078, 0xFFFFF300,
|
|
0x020c407c, 0x0F0000C3,
|
|
0x020c4080, 0x00000FFF,
|
|
0x020e0010, 0xF00000CF,
|
|
0x020e0018, 0x007F007F,
|
|
0x020e001c, 0x007F007F,
|
|
};
|
|
|
|
static void ddr_init(int *table, int size)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < size / 2 ; i++)
|
|
writel(table[2 * i + 1], table[2 * i]);
|
|
}
|
|
|
|
static void spl_dram_init(void)
|
|
{
|
|
if (is_mx6dq())
|
|
ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
|
|
else if (is_mx6dqp())
|
|
ddr_init(mx6qp_dcd_table, ARRAY_SIZE(mx6qp_dcd_table));
|
|
else if (is_mx6sdl())
|
|
ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
/* DDR initialization */
|
|
spl_dram_init();
|
|
|
|
/* setup AIPS and disable watchdog */
|
|
arch_cpu_init();
|
|
|
|
ccgr_init();
|
|
gpr_init();
|
|
|
|
/* iomux and setup of i2c */
|
|
board_early_init_f();
|
|
|
|
/* setup GP timer */
|
|
timer_init();
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
preloader_console_init();
|
|
|
|
/* Clear the BSS. */
|
|
memset(__bss_start, 0, __bss_end - __bss_start);
|
|
|
|
/* load/boot image from boot device */
|
|
board_init_r(NULL, 0);
|
|
}
|
|
#endif
|