mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
c69cda25c9
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
256 lines
6.9 KiB
C
256 lines
6.9 KiB
C
/*
|
|
* This code was extracted from:
|
|
* git://github.com/gonzoua/u-boot-pi.git master
|
|
* and hence presumably (C) 2012 Oleksandr Tymoshenko
|
|
*
|
|
* Tweaks for U-Boot upstreaming
|
|
* (C) 2012 Stephen Warren
|
|
*
|
|
* Portions (e.g. read/write macros, concepts for back-to-back register write
|
|
* timing workarounds) obviously extracted from the Linux kernel at:
|
|
* https://github.com/raspberrypi/linux.git rpi-3.6.y
|
|
*
|
|
* The Linux kernel code has the following (c) and license, which is hence
|
|
* propagated to Oleksandr's tree and here:
|
|
*
|
|
* Support for SDHCI device on 2835
|
|
* Based on sdhci-bcm2708.c (c) 2010 Broadcom
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/* Supports:
|
|
* SDHCI platform device - Arasan SD controller in BCM2708
|
|
*
|
|
* Inspired by sdhci-pci.c, by Pierre Ossman
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <sdhci.h>
|
|
#include <time.h>
|
|
#include <asm/arch/msg.h>
|
|
#include <asm/arch/mbox.h>
|
|
#include <mach/sdhci.h>
|
|
#include <mach/timer.h>
|
|
|
|
/* 400KHz is max freq for card ID etc. Use that as min */
|
|
#define MIN_FREQ 400000
|
|
#define SDHCI_BUFFER 0x20
|
|
|
|
struct bcm2835_sdhci_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
|
|
struct bcm2835_sdhci_host {
|
|
struct sdhci_host host;
|
|
uint twoticks_delay;
|
|
ulong last_write;
|
|
};
|
|
|
|
static inline struct bcm2835_sdhci_host *to_bcm(struct sdhci_host *host)
|
|
{
|
|
return (struct bcm2835_sdhci_host *)host;
|
|
}
|
|
|
|
static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val,
|
|
int reg)
|
|
{
|
|
struct bcm2835_sdhci_host *bcm_host = to_bcm(host);
|
|
|
|
/*
|
|
* The Arasan has a bugette whereby it may lose the content of
|
|
* successive writes to registers that are within two SD-card clock
|
|
* cycles of each other (a clock domain crossing problem).
|
|
* It seems, however, that the data register does not have this problem.
|
|
* (Which is just as well - otherwise we'd have to nobble the DMA engine
|
|
* too)
|
|
*/
|
|
if (reg != SDHCI_BUFFER) {
|
|
while (timer_get_us() - bcm_host->last_write <
|
|
bcm_host->twoticks_delay)
|
|
;
|
|
}
|
|
|
|
writel(val, host->ioaddr + reg);
|
|
bcm_host->last_write = timer_get_us();
|
|
}
|
|
|
|
static inline u32 bcm2835_sdhci_raw_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
return readl(host->ioaddr + reg);
|
|
}
|
|
|
|
static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
bcm2835_sdhci_raw_writel(host, val, reg);
|
|
}
|
|
|
|
static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
static u32 shadow;
|
|
u32 oldval = (reg == SDHCI_COMMAND) ? shadow :
|
|
bcm2835_sdhci_raw_readl(host, reg & ~3);
|
|
u32 word_num = (reg >> 1) & 1;
|
|
u32 word_shift = word_num * 16;
|
|
u32 mask = 0xffff << word_shift;
|
|
u32 newval = (oldval & ~mask) | (val << word_shift);
|
|
|
|
if (reg == SDHCI_TRANSFER_MODE)
|
|
shadow = newval;
|
|
else
|
|
bcm2835_sdhci_raw_writel(host, newval, reg & ~3);
|
|
}
|
|
|
|
static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
u32 oldval = bcm2835_sdhci_raw_readl(host, reg & ~3);
|
|
u32 byte_num = reg & 3;
|
|
u32 byte_shift = byte_num * 8;
|
|
u32 mask = 0xff << byte_shift;
|
|
u32 newval = (oldval & ~mask) | (val << byte_shift);
|
|
|
|
bcm2835_sdhci_raw_writel(host, newval, reg & ~3);
|
|
}
|
|
|
|
static u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = bcm2835_sdhci_raw_readl(host, reg);
|
|
|
|
return val;
|
|
}
|
|
|
|
static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3));
|
|
u32 word_num = (reg >> 1) & 1;
|
|
u32 word_shift = word_num * 16;
|
|
u32 word = (val >> word_shift) & 0xffff;
|
|
|
|
return word;
|
|
}
|
|
|
|
static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3));
|
|
u32 byte_num = reg & 3;
|
|
u32 byte_shift = byte_num * 8;
|
|
u32 byte = (val >> byte_shift) & 0xff;
|
|
|
|
return byte;
|
|
}
|
|
|
|
static const struct sdhci_ops bcm2835_ops = {
|
|
.write_l = bcm2835_sdhci_writel,
|
|
.write_w = bcm2835_sdhci_writew,
|
|
.write_b = bcm2835_sdhci_writeb,
|
|
.read_l = bcm2835_sdhci_readl,
|
|
.read_w = bcm2835_sdhci_readw,
|
|
.read_b = bcm2835_sdhci_readb,
|
|
};
|
|
|
|
static int bcm2835_sdhci_bind(struct udevice *dev)
|
|
{
|
|
struct bcm2835_sdhci_plat *plat = dev_get_plat(dev);
|
|
|
|
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
static int bcm2835_sdhci_probe(struct udevice *dev)
|
|
{
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct bcm2835_sdhci_plat *plat = dev_get_plat(dev);
|
|
struct bcm2835_sdhci_host *priv = dev_get_priv(dev);
|
|
struct sdhci_host *host = &priv->host;
|
|
fdt_addr_t base;
|
|
int emmc_freq;
|
|
int ret;
|
|
int clock_id = (int)dev_get_driver_data(dev);
|
|
|
|
base = dev_read_addr(dev);
|
|
if (base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
ret = bcm2835_get_mmc_clock(clock_id);
|
|
if (ret < 0) {
|
|
debug("%s: Failed to set MMC clock (err=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
emmc_freq = ret;
|
|
|
|
/*
|
|
* See the comments in bcm2835_sdhci_raw_writel().
|
|
*
|
|
* This should probably be dynamically calculated based on the actual
|
|
* frequency. However, this is the longest we'll have to wait, and
|
|
* doesn't seem to slow access down too much, so the added complexity
|
|
* doesn't seem worth it for now.
|
|
*
|
|
* 1/MIN_FREQ is (max) time per tick of eMMC clock.
|
|
* 2/MIN_FREQ is time for two ticks.
|
|
* Multiply by 1000000 to get uS per two ticks.
|
|
* +1 for hack rounding.
|
|
*/
|
|
priv->twoticks_delay = ((2 * 1000000) / MIN_FREQ) + 1;
|
|
priv->last_write = 0;
|
|
|
|
host->name = dev->name;
|
|
host->ioaddr = (void *)(uintptr_t)base;
|
|
host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B |
|
|
SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_NO_HISPD_BIT;
|
|
host->max_clk = emmc_freq;
|
|
host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
|
|
host->ops = &bcm2835_ops;
|
|
|
|
host->mmc = &plat->mmc;
|
|
host->mmc->dev = dev;
|
|
|
|
ret = sdhci_setup_cfg(&plat->cfg, host, emmc_freq, MIN_FREQ);
|
|
if (ret) {
|
|
debug("%s: Failed to setup SDHCI (err=%d)\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
upriv->mmc = &plat->mmc;
|
|
host->mmc->priv = host;
|
|
|
|
return sdhci_probe(dev);
|
|
}
|
|
|
|
static const struct udevice_id bcm2835_sdhci_match[] = {
|
|
{
|
|
.compatible = "brcm,bcm2835-sdhci",
|
|
.data = BCM2835_MBOX_CLOCK_ID_EMMC
|
|
},
|
|
{
|
|
.compatible = "brcm,bcm2711-emmc2",
|
|
.data = BCM2835_MBOX_CLOCK_ID_EMMC2
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sdhci_cdns) = {
|
|
.name = "sdhci-bcm2835",
|
|
.id = UCLASS_MMC,
|
|
.of_match = bcm2835_sdhci_match,
|
|
.bind = bcm2835_sdhci_bind,
|
|
.probe = bcm2835_sdhci_probe,
|
|
.priv_auto = sizeof(struct bcm2835_sdhci_host),
|
|
.plat_auto = sizeof(struct bcm2835_sdhci_plat),
|
|
.ops = &sdhci_ops,
|
|
};
|