mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
3e01ed00da
The definitions inside emif_defs.h concern davinci nand driver and should be in it's header. So create header file for davinci nand driver and move definitions from emif_defs.h and nand_defs.h to it. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> [trini: Fixup more davinci breakage] Signed-off-by: Tom Rini <trini@ti.com>
460 lines
12 KiB
C
460 lines
12 KiB
C
/*
|
|
* SoC-specific lowlevel code for tms320dm365 and similar chips
|
|
* Actually used for booting from NAND with nand_spl.
|
|
*
|
|
* Copyright (C) 2011
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <nand.h>
|
|
#include <ns16550.h>
|
|
#include <post.h>
|
|
#include <asm/ti-common/davinci_nand.h>
|
|
#include <asm/arch/dm365_lowlevel.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
void dm365_waitloop(unsigned long loopcnt)
|
|
{
|
|
unsigned long i;
|
|
|
|
for (i = 0; i < loopcnt; i++)
|
|
asm(" NOP");
|
|
}
|
|
|
|
int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
|
|
{
|
|
unsigned int clksrc = 0x0;
|
|
|
|
/* Power up the PLL */
|
|
clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN);
|
|
|
|
clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9);
|
|
setbits_le32(&dv_pll0_regs->pllctl,
|
|
clksrc << PLLCTL_CLOCK_MODE_SHIFT);
|
|
|
|
/*
|
|
* Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
|
|
* through MMR
|
|
*/
|
|
clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLENSRC);
|
|
|
|
/* Set PLLEN=0 => PLL BYPASS MODE */
|
|
clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN);
|
|
|
|
dm365_waitloop(150);
|
|
|
|
/* PLLRST=1(reset assert) */
|
|
setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST);
|
|
|
|
dm365_waitloop(300);
|
|
|
|
/*Bring PLL out of Reset*/
|
|
clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST);
|
|
|
|
/* Program the Multiper and Pre-Divider for PLL1 */
|
|
writel(pllmult, &dv_pll0_regs->pllm);
|
|
writel(prediv, &dv_pll0_regs->prediv);
|
|
|
|
/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
|
|
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
|
|
PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
|
|
/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */
|
|
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE,
|
|
&dv_pll0_regs->secctl);
|
|
/* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */
|
|
writel(PLLSECCTL_STOPMODE, &dv_pll0_regs->secctl);
|
|
/* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */
|
|
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
|
|
|
|
/* Program the PostDiv for PLL1 */
|
|
writel(PLL_POSTDEN, &dv_pll0_regs->postdiv);
|
|
|
|
/* Post divider setting for PLL1 */
|
|
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1);
|
|
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV2, &dv_pll0_regs->plldiv2);
|
|
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV3, &dv_pll0_regs->plldiv3);
|
|
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV4, &dv_pll0_regs->plldiv4);
|
|
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV5, &dv_pll0_regs->plldiv5);
|
|
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV6, &dv_pll0_regs->plldiv6);
|
|
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV7, &dv_pll0_regs->plldiv7);
|
|
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV8, &dv_pll0_regs->plldiv8);
|
|
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV9, &dv_pll0_regs->plldiv9);
|
|
|
|
dm365_waitloop(300);
|
|
|
|
/* Set the GOSET bit */
|
|
writel(PLLCMD_GOSET, &dv_pll0_regs->pllcmd); /* Go */
|
|
|
|
dm365_waitloop(300);
|
|
|
|
/* Wait for PLL to LOCK */
|
|
while (!((readl(&dv_sys_module_regs->pll0_config) & PLL0_LOCK)
|
|
== PLL0_LOCK))
|
|
;
|
|
|
|
/* Enable the PLL Bit of PLLCTL*/
|
|
setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
|
|
{
|
|
unsigned int clksrc = 0x0;
|
|
|
|
/* Power up the PLL*/
|
|
clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLPWRDN);
|
|
|
|
/*
|
|
* Select the Clock Mode as Onchip Oscilator or External Clock on
|
|
* MXI pin
|
|
* VDB has input on MXI pin
|
|
*/
|
|
clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9);
|
|
setbits_le32(&dv_pll1_regs->pllctl,
|
|
clksrc << PLLCTL_CLOCK_MODE_SHIFT);
|
|
|
|
/*
|
|
* Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
|
|
* through MMR
|
|
*/
|
|
clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLENSRC);
|
|
|
|
/* Set PLLEN=0 => PLL BYPASS MODE */
|
|
clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN);
|
|
|
|
dm365_waitloop(50);
|
|
|
|
/* PLLRST=1(reset assert) */
|
|
setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST);
|
|
|
|
dm365_waitloop(300);
|
|
|
|
/* Bring PLL out of Reset */
|
|
clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST);
|
|
|
|
/* Program the Multiper and Pre-Divider for PLL2 */
|
|
writel(pllm, &dv_pll1_regs->pllm);
|
|
writel(prediv, &dv_pll1_regs->prediv);
|
|
|
|
writel(PLL_POSTDEN, &dv_pll1_regs->postdiv);
|
|
|
|
/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
|
|
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
|
|
PLLSECCTL_TINITZ, &dv_pll1_regs->secctl);
|
|
/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */
|
|
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE,
|
|
&dv_pll1_regs->secctl);
|
|
/* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */
|
|
writel(PLLSECCTL_STOPMODE, &dv_pll1_regs->secctl);
|
|
/* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */
|
|
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll1_regs->secctl);
|
|
|
|
/* Post divider setting for PLL2 */
|
|
writel(CONFIG_SYS_DM36x_PLL2_PLLDIV1, &dv_pll1_regs->plldiv1);
|
|
writel(CONFIG_SYS_DM36x_PLL2_PLLDIV2, &dv_pll1_regs->plldiv2);
|
|
writel(CONFIG_SYS_DM36x_PLL2_PLLDIV3, &dv_pll1_regs->plldiv3);
|
|
writel(CONFIG_SYS_DM36x_PLL2_PLLDIV4, &dv_pll1_regs->plldiv4);
|
|
writel(CONFIG_SYS_DM36x_PLL2_PLLDIV5, &dv_pll1_regs->plldiv5);
|
|
|
|
/* GoCmd for PostDivider to take effect */
|
|
writel(PLLCMD_GOSET, &dv_pll1_regs->pllcmd);
|
|
|
|
dm365_waitloop(150);
|
|
|
|
/* Wait for PLL to LOCK */
|
|
while (!((readl(&dv_sys_module_regs->pll1_config) & PLL1_LOCK)
|
|
== PLL1_LOCK))
|
|
;
|
|
|
|
dm365_waitloop(4100);
|
|
|
|
/* Enable the PLL2 */
|
|
setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN);
|
|
|
|
/* do this after PLL's have been set up */
|
|
writel(CONFIG_SYS_DM36x_PERI_CLK_CTRL,
|
|
&dv_sys_module_regs->peri_clkctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dm365_ddr_setup(void)
|
|
{
|
|
lpsc_on(DAVINCI_LPSC_DDR_EMIF);
|
|
clrbits_le32(&dv_sys_module_regs->vtpiocr,
|
|
VPTIO_IOPWRDN | VPTIO_CLRZ | VPTIO_LOCK | VPTIO_PWRDN);
|
|
|
|
/* Set bit CLRZ (bit 13) */
|
|
setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_CLRZ);
|
|
|
|
/* Check VTP READY Status */
|
|
while (!(readl(&dv_sys_module_regs->vtpiocr) & VPTIO_RDY))
|
|
;
|
|
|
|
/* Set bit VTP_IOPWRDWN bit 14 for DDR input buffers) */
|
|
setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_IOPWRDN);
|
|
|
|
/* Set bit LOCK(bit7) */
|
|
setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_LOCK);
|
|
|
|
/*
|
|
* Powerdown VTP as it is locked (bit 6)
|
|
* Set bit VTP_IOPWRDWN bit 14 for DDR input buffers)
|
|
*/
|
|
setbits_le32(&dv_sys_module_regs->vtpiocr,
|
|
VPTIO_IOPWRDN | VPTIO_PWRDN);
|
|
|
|
/* Wait for calibration to complete */
|
|
dm365_waitloop(150);
|
|
|
|
/* Set the DDR2 to synreset, then enable it again */
|
|
lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
|
|
lpsc_on(DAVINCI_LPSC_DDR_EMIF);
|
|
|
|
writel(CONFIG_SYS_DM36x_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
|
|
|
|
/* Program SDRAM Bank Config Register */
|
|
writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_BOOTUNLOCK),
|
|
&dv_ddr2_regs_ctrl->sdbcr);
|
|
writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_TIMUNLOCK),
|
|
&dv_ddr2_regs_ctrl->sdbcr);
|
|
|
|
/* Program SDRAM Timing Control Register1 */
|
|
writel(CONFIG_SYS_DM36x_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
|
|
/* Program SDRAM Timing Control Register2 */
|
|
writel(CONFIG_SYS_DM36x_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
|
|
|
|
writel(CONFIG_SYS_DM36x_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
|
|
|
|
writel(CONFIG_SYS_DM36x_DDR2_SDBCR, &dv_ddr2_regs_ctrl->sdbcr);
|
|
|
|
/* Program SDRAM Refresh Control Register */
|
|
writel(CONFIG_SYS_DM36x_DDR2_SDRCR, &dv_ddr2_regs_ctrl->sdrcr);
|
|
|
|
lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
|
|
lpsc_on(DAVINCI_LPSC_DDR_EMIF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dm365_vpss_sync_reset(void)
|
|
{
|
|
unsigned int PdNum = 0;
|
|
|
|
/* VPSS_CLKMD 1:1 */
|
|
setbits_le32(&dv_sys_module_regs->vpss_clkctl,
|
|
VPSS_CLK_CTL_VPSS_CLKMD);
|
|
|
|
/* LPSC SyncReset DDR Clock Enable */
|
|
writel(((readl(&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]) &
|
|
~PSC_MD_STATE_MSK) | PSC_SYNCRESET),
|
|
&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]);
|
|
|
|
writel((1 << PdNum), &dv_psc_regs->ptcmd);
|
|
|
|
while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0))
|
|
;
|
|
while (!((readl(&dv_psc_regs->mdstat[DAVINCI_LPSC_VPSSMASTER]) &
|
|
PSC_MD_STATE_MSK) == PSC_SYNCRESET))
|
|
;
|
|
}
|
|
|
|
static void dm365_por_reset(void)
|
|
{
|
|
struct davinci_timer *wdog =
|
|
(struct davinci_timer *)DAVINCI_WDOG_BASE;
|
|
|
|
if (readl(&dv_pll0_regs->rstype) &
|
|
(PLL_RSTYPE_POR | PLL_RSTYPE_XWRST)) {
|
|
dm365_vpss_sync_reset();
|
|
|
|
writel(DV_TMPBUF_VAL, TMPBUF);
|
|
setbits_le32(TMPSTATUS, FLAG_PORRST);
|
|
writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1);
|
|
writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2);
|
|
|
|
while (1);
|
|
}
|
|
}
|
|
|
|
static void dm365_wdt_reset(void)
|
|
{
|
|
struct davinci_timer *wdog =
|
|
(struct davinci_timer *)DAVINCI_WDOG_BASE;
|
|
|
|
if (readl(TMPBUF) != DV_TMPBUF_VAL) {
|
|
writel(DV_TMPBUF_VAL, TMPBUF);
|
|
setbits_le32(TMPSTATUS, FLAG_PORRST);
|
|
setbits_le32(TMPSTATUS, FLAG_FLGOFF);
|
|
|
|
dm365_waitloop(100);
|
|
|
|
dm365_vpss_sync_reset();
|
|
|
|
writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1);
|
|
writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2);
|
|
|
|
while (1);
|
|
}
|
|
}
|
|
|
|
static void dm365_wdt_flag_on(void)
|
|
{
|
|
/* VPSS_CLKMD 1:2 */
|
|
clrbits_le32(&dv_sys_module_regs->vpss_clkctl,
|
|
VPSS_CLK_CTL_VPSS_CLKMD);
|
|
writel(0, TMPBUF);
|
|
setbits_le32(TMPSTATUS, FLAG_FLGON);
|
|
}
|
|
|
|
void dm365_psc_init(void)
|
|
{
|
|
unsigned char i = 0;
|
|
unsigned char lpsc_start;
|
|
unsigned char lpsc_end, lpscgroup, lpscmin, lpscmax;
|
|
unsigned int PdNum = 0;
|
|
|
|
lpscmin = 0;
|
|
lpscmax = 2;
|
|
|
|
for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) {
|
|
if (lpscgroup == 0) {
|
|
/* Enabling LPSC 3 to 28 SCR first */
|
|
lpsc_start = DAVINCI_LPSC_VPSSMSTR;
|
|
lpsc_end = DAVINCI_LPSC_TIMER1;
|
|
} else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */
|
|
lpsc_start = DAVINCI_LPSC_CFG5;
|
|
lpsc_end = DAVINCI_LPSC_VPSSMASTER;
|
|
} else {
|
|
lpsc_start = DAVINCI_LPSC_MJCP;
|
|
lpsc_end = DAVINCI_LPSC_HDVICP;
|
|
}
|
|
|
|
/* NEXT=0x3, Enable LPSC's */
|
|
for (i = lpsc_start; i <= lpsc_end; i++)
|
|
setbits_le32(&dv_psc_regs->mdctl[i], PSC_ENABLE);
|
|
|
|
/*
|
|
* Program goctl to start transition sequence for LPSCs
|
|
* CSL_PSC_0_REGS->PTCMD = (1<<PdNum); Kick off Power
|
|
* Domain 0 Modules
|
|
*/
|
|
writel((1 << PdNum), &dv_psc_regs->ptcmd);
|
|
|
|
/*
|
|
* Wait for GOSTAT = NO TRANSITION from PSC for Powerdomain 0
|
|
*/
|
|
while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT)
|
|
== 0))
|
|
;
|
|
|
|
/* Wait for MODSTAT = ENABLE from LPSC's */
|
|
for (i = lpsc_start; i <= lpsc_end; i++)
|
|
while (!((readl(&dv_psc_regs->mdstat[i]) &
|
|
PSC_MD_STATE_MSK) == PSC_ENABLE))
|
|
;
|
|
}
|
|
}
|
|
|
|
static void dm365_emif_init(void)
|
|
{
|
|
writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr);
|
|
writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr);
|
|
|
|
setbits_le32(&davinci_emif_regs->nandfcr, DAVINCI_NANDFCR_CS2NAND);
|
|
|
|
writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr);
|
|
|
|
return;
|
|
}
|
|
|
|
void dm365_pinmux_ctl(unsigned long offset, unsigned long mask,
|
|
unsigned long value)
|
|
{
|
|
clrbits_le32(&dv_sys_module_regs->pinmux[offset], mask);
|
|
setbits_le32(&dv_sys_module_regs->pinmux[offset], (mask & value));
|
|
}
|
|
|
|
__attribute__((weak))
|
|
void board_gpio_init(void)
|
|
{
|
|
return;
|
|
}
|
|
|
|
#if defined(CONFIG_POST)
|
|
int post_log(char *format, ...)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void dm36x_lowlevel_init(ulong bootflag)
|
|
{
|
|
struct davinci_uart_ctrl_regs *davinci_uart_ctrl_regs =
|
|
(struct davinci_uart_ctrl_regs *)(CONFIG_SYS_NS16550_COM1 +
|
|
DAVINCI_UART_CTRL_BASE);
|
|
|
|
/* Mask all interrupts */
|
|
writel(DV_AINTC_INTCTL_IDMODE, &dv_aintc_regs->intctl);
|
|
writel(0x0, &dv_aintc_regs->eabase);
|
|
writel(0x0, &dv_aintc_regs->eint0);
|
|
writel(0x0, &dv_aintc_regs->eint1);
|
|
|
|
/* Clear all interrupts */
|
|
writel(0xffffffff, &dv_aintc_regs->fiq0);
|
|
writel(0xffffffff, &dv_aintc_regs->fiq1);
|
|
writel(0xffffffff, &dv_aintc_regs->irq0);
|
|
writel(0xffffffff, &dv_aintc_regs->irq1);
|
|
|
|
dm365_por_reset();
|
|
dm365_wdt_reset();
|
|
|
|
/* System PSC setup - enable all */
|
|
dm365_psc_init();
|
|
|
|
/* Setup Pinmux */
|
|
dm365_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX0);
|
|
dm365_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX1);
|
|
dm365_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX2);
|
|
dm365_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX3);
|
|
dm365_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX4);
|
|
|
|
/* PLL setup */
|
|
dm365_pll1_init(CONFIG_SYS_DM36x_PLL1_PLLM,
|
|
CONFIG_SYS_DM36x_PLL1_PREDIV);
|
|
dm365_pll2_init(CONFIG_SYS_DM36x_PLL2_PLLM,
|
|
CONFIG_SYS_DM36x_PLL2_PREDIV);
|
|
|
|
/* GPIO setup */
|
|
board_gpio_init();
|
|
|
|
NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
|
|
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
|
|
|
|
/*
|
|
* Fix Power and Emulation Management Register
|
|
* see sprufh2.pdf page 38 Table 22
|
|
*/
|
|
writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
|
|
DAVINCI_UART_PWREMU_MGMT_UTRST),
|
|
&davinci_uart_ctrl_regs->pwremu_mgmt);
|
|
|
|
puts("ddr init\n");
|
|
dm365_ddr_setup();
|
|
|
|
puts("emif init\n");
|
|
dm365_emif_init();
|
|
|
|
dm365_wdt_flag_on();
|
|
|
|
#if defined(CONFIG_POST)
|
|
/*
|
|
* Do memory tests, calls arch_memory_failure_handle()
|
|
* if error detected.
|
|
*/
|
|
memory_post_test(0);
|
|
#endif
|
|
}
|