mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
176c3e7760
Make it possible to invoke rescue boot from U-Boot console, without having to press the factory reset button. This is needed when accessing the device remotely, for example. Achieve this by putting rescue command into `bootcmd_rescue` default environment variable and setting some distroboot environment variables to their default values when the factory button is pressed. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
144 lines
3.9 KiB
C
144 lines
3.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
|
|
* Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
|
|
*/
|
|
|
|
#ifndef _CONFIG_TURRIS_OMNIA_H
|
|
#define _CONFIG_TURRIS_OMNIA_H
|
|
|
|
/*
|
|
* High Level Configuration Options (easy to change)
|
|
*/
|
|
|
|
/*
|
|
* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
|
|
* for DDR ECC byte filling in the SPL before loading the main
|
|
* U-Boot into it.
|
|
*/
|
|
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
|
|
|
|
/* USB/EHCI configuration */
|
|
#define CONFIG_EHCI_IS_TDI
|
|
|
|
/* Environment in SPI NOR flash */
|
|
|
|
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
|
|
|
|
/* Keep device tree and initrd in lower memory so the kernel can access them */
|
|
#define RELOCATION_LIMITS_ENV_SETTINGS \
|
|
"fdt_high=0x10000000\0" \
|
|
"initrd_high=0x10000000\0"
|
|
|
|
/* Defines for SPL */
|
|
#define CONFIG_SPL_SIZE (140 << 10)
|
|
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
|
|
|
|
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
|
|
#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_MALLOC_SIMPLE
|
|
#endif
|
|
|
|
#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
|
|
#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
|
|
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
|
|
|
|
#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
|
|
/* SPL related SPI defines */
|
|
# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
|
|
#endif
|
|
|
|
#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
|
|
/* SPL related MMC defines */
|
|
# define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
|
|
# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
|
|
# ifdef CONFIG_SPL_BUILD
|
|
# define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
|
|
# endif
|
|
#endif
|
|
|
|
/*
|
|
* mv-common.h should be defined after CMD configs since it used them
|
|
* to enable certain macros
|
|
*/
|
|
#include "mv-common.h"
|
|
|
|
/* Include the common distro boot environment */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
|
|
#ifdef CONFIG_MMC
|
|
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
|
|
#else
|
|
#define BOOT_TARGET_DEVICES_MMC(func)
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_STORAGE
|
|
#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
|
|
#else
|
|
#define BOOT_TARGET_DEVICES_USB(func)
|
|
#endif
|
|
|
|
#ifdef CONFIG_SCSI
|
|
#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
|
|
#else
|
|
#define BOOT_TARGET_DEVICES_SCSI(func)
|
|
#endif
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
BOOT_TARGET_DEVICES_MMC(func) \
|
|
BOOT_TARGET_DEVICES_SCSI(func) \
|
|
BOOT_TARGET_DEVICES_USB(func) \
|
|
func(PXE, pxe, na) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#define KERNEL_ADDR_R __stringify(0x1000000)
|
|
#define FDT_ADDR_R __stringify(0x2000000)
|
|
#define RAMDISK_ADDR_R __stringify(0x2200000)
|
|
#define SCRIPT_ADDR_R __stringify(0x1800000)
|
|
#define PXEFILE_ADDR_R __stringify(0x1900000)
|
|
|
|
#define LOAD_ADDRESS_ENV_SETTINGS \
|
|
"kernel_addr_r=" KERNEL_ADDR_R "\0" \
|
|
"fdt_addr_r=" FDT_ADDR_R "\0" \
|
|
"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
|
|
"scriptaddr=" SCRIPT_ADDR_R "\0" \
|
|
"pxefile_addr_r=" PXEFILE_ADDR_R "\0"
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
/*
|
|
* The factory reset bootcommand on Omnia first sets all the front LEDs to green
|
|
* and then tries to load the rescue image from SPI flash memory and boot it
|
|
*/
|
|
#define TURRIS_OMNIA_BOOTCMD_RESCUE \
|
|
"i2c dev 2; " \
|
|
"i2c mw 0x2a.1 0x3 0x1c 1; " \
|
|
"i2c mw 0x2a.1 0x4 0x1c 1; " \
|
|
"mw.l 0x01000000 0x00ff000c; " \
|
|
"i2c write 0x01000000 0x2a.1 0x5 4 -s; " \
|
|
"setenv bootargs \"earlyprintk console=ttyS0,115200" \
|
|
" omniarescue=$omnia_reset rescue_mode=$omnia_reset\"; " \
|
|
"sf probe; " \
|
|
"sf read 0x1000000 0x100000 0x700000; " \
|
|
"lzmadec 0x1000000 0x1700000; " \
|
|
"if gpio input gpio@71_4; then " \
|
|
"bootm 0x1700000#sfp; " \
|
|
"else " \
|
|
"bootm 0x1700000; " \
|
|
"fi; " \
|
|
"bootz 0x1000000"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
RELOCATION_LIMITS_ENV_SETTINGS \
|
|
LOAD_ADDRESS_ENV_SETTINGS \
|
|
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
|
|
"console=ttyS0,115200\0" \
|
|
"ethact=ethernet@34000\0" \
|
|
"bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \
|
|
BOOTENV
|
|
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
#endif /* _CONFIG_TURRIS_OMNIA_H */
|