u-boot/arch/arm/include/asm/arch-lpc32xx/clk.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

186 lines
6.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
*/
#ifndef _LPC32XX_CLK_H
#define _LPC32XX_CLK_H
#include <asm/types.h>
#define OSC_CLK_FREQUENCY 13000000
#define RTC_CLK_FREQUENCY 32768
/* Clocking and Power Control Registers */
struct clk_pm_regs {
u32 reserved0[5];
u32 boot_map; /* Boot Map Control Register */
u32 p0_intr_er; /* Port 0/1 Start and Interrupt Enable */
u32 usbdiv_ctrl; /* USB Clock Pre-Divide Register */
/* Internal Start Signal Sources Registers */
u32 start_er_int; /* Start Enable Register */
u32 start_rsr_int; /* Start Raw Status Register */
u32 start_sr_int; /* Start Status Register */
u32 start_apr_int; /* Start Activation Polarity Register */
/* Device Pin Start Signal Sources Registers */
u32 start_er_pin; /* Start Enable Register */
u32 start_rsr_pin; /* Start Raw Status Register */
u32 start_sr_pin; /* Start Status Register */
u32 start_apr_pin; /* Start Activation Polarity Register */
/* Clock Control Registers */
u32 hclkdiv_ctrl; /* HCLK Divider Control Register */
u32 pwr_ctrl; /* Power Control Register */
u32 pll397_ctrl; /* PLL397 Control Register */
u32 osc_ctrl; /* Main Oscillator Control Register */
u32 sysclk_ctrl; /* SYSCLK Control Register */
u32 lcdclk_ctrl; /* LCD Clock Control Register */
u32 hclkpll_ctrl; /* HCLK PLL Control Register */
u32 reserved1;
u32 adclk_ctrl1; /* ADC Clock Control1 Register */
u32 usb_ctrl; /* USB Control Register */
u32 sdramclk_ctrl; /* SDRAM Clock Control Register */
u32 ddr_lap_nom; /* DDR Calibration Nominal Value */
u32 ddr_lap_count; /* DDR Calibration Measured Value */
u32 ddr_cal_delay; /* DDR Calibration Delay Value */
u32 ssp_ctrl; /* SSP Control Register */
u32 i2s_ctrl; /* I2S Clock Control Register */
u32 ms_ctrl; /* Memory Card Control Register */
u32 reserved2[3];
u32 macclk_ctrl; /* Ethernet MAC Clock Control Register */
u32 reserved3[4];
u32 test_clk; /* Test Clock Selection Register */
u32 sw_int; /* Software Interrupt Register */
u32 i2cclk_ctrl; /* I2C Clock Control Register */
u32 keyclk_ctrl; /* Keyboard Scan Clock Control Register */
u32 adclk_ctrl; /* ADC Clock Control Register */
u32 pwmclk_ctrl; /* PWM Clock Control Register */
u32 timclk_ctrl; /* Watchdog and Highspeed Timer Control */
u32 timclk_ctrl1; /* Motor and Timer Clock Control */
u32 spi_ctrl; /* SPI Control Register */
u32 flashclk_ctrl; /* NAND Flash Clock Control Register */
u32 reserved4;
u32 u3clk; /* UART 3 Clock Control Register */
u32 u4clk; /* UART 4 Clock Control Register */
u32 u5clk; /* UART 5 Clock Control Register */
u32 u6clk; /* UART 6 Clock Control Register */
u32 irdaclk; /* IrDA Clock Control Register */
u32 uartclk_ctrl; /* UART Clock Control Register */
u32 dmaclk_ctrl; /* DMA Clock Control Register */
u32 autoclk_ctrl; /* Autoclock Control Register */
};
/* HCLK Divider Control Register bits */
#define CLK_HCLK_DDRAM_MASK (0x3 << 7)
#define CLK_HCLK_DDRAM_HALF (0x2 << 7)
#define CLK_HCLK_DDRAM_NOMINAL (0x1 << 7)
#define CLK_HCLK_DDRAM_STOPPED (0x0 << 7)
#define CLK_HCLK_PERIPH_DIV_MASK (0x1F << 2)
#define CLK_HCLK_PERIPH_DIV(n) ((((n) - 1) & 0x1F) << 2)
#define CLK_HCLK_ARM_PLL_DIV_MASK (0x3 << 0)
#define CLK_HCLK_ARM_PLL_DIV_4 (0x2 << 0)
#define CLK_HCLK_ARM_PLL_DIV_2 (0x1 << 0)
#define CLK_HCLK_ARM_PLL_DIV_1 (0x0 << 0)
/* Power Control Register bits */
#define CLK_PWR_HCLK_RUN_PERIPH (1 << 10)
#define CLK_PWR_EMC_SREFREQ (1 << 9)
#define CLK_PWR_EMC_SREFREQ_UPDATE (1 << 8)
#define CLK_PWR_SDRAM_SREFREQ (1 << 7)
#define CLK_PWR_HIGHCORE_LEVEL (1 << 5)
#define CLK_PWR_SYSCLKEN_LEVEL (1 << 4)
#define CLK_PWR_SYSCLKEN_CTRL (1 << 3)
#define CLK_PWR_NORMAL_RUN (1 << 2)
#define CLK_PWR_HIGHCORE_CTRL (1 << 1)
#define CLK_PWR_STOP_MODE (1 << 0)
/* SYSCLK Control Register bits */
#define CLK_SYSCLK_PLL397 (1 << 1)
#define CLK_SYSCLK_MUX (1 << 0)
/* HCLK PLL Control Register bits */
#define CLK_HCLK_PLL_OPERATING (1 << 16)
#define CLK_HCLK_PLL_BYPASS (1 << 15)
#define CLK_HCLK_PLL_DIRECT (1 << 14)
#define CLK_HCLK_PLL_FEEDBACK (1 << 13)
#define CLK_HCLK_PLL_POSTDIV_MASK (0x3 << 11)
#define CLK_HCLK_PLL_POSTDIV_16 (0x3 << 11)
#define CLK_HCLK_PLL_POSTDIV_8 (0x2 << 11)
#define CLK_HCLK_PLL_POSTDIV_4 (0x1 << 11)
#define CLK_HCLK_PLL_POSTDIV_2 (0x0 << 11)
#define CLK_HCLK_PLL_PREDIV_MASK (0x3 << 9)
#define CLK_HCLK_PLL_PREDIV_4 (0x3 << 9)
#define CLK_HCLK_PLL_PREDIV_3 (0x2 << 9)
#define CLK_HCLK_PLL_PREDIV_2 (0x1 << 9)
#define CLK_HCLK_PLL_PREDIV_1 (0x0 << 9)
#define CLK_HCLK_PLL_FEEDBACK_DIV_MASK (0xFF << 1)
#define CLK_HCLK_PLL_FEEDBACK_DIV(n) ((((n) - 1) & 0xFF) << 1)
#define CLK_HCLK_PLL_LOCKED (1 << 0)
/* Ethernet MAC Clock Control Register bits */
#define CLK_MAC_RMII (0x3 << 3)
#define CLK_MAC_MII (0x1 << 3)
#define CLK_MAC_MASTER (1 << 2)
#define CLK_MAC_SLAVE (1 << 1)
#define CLK_MAC_REG (1 << 0)
/* I2C Clock Control Register bits */
#define CLK_I2C2_ENABLE (1 << 1)
#define CLK_I2C1_ENABLE (1 << 0)
/* Timer Clock Control1 Register bits */
#define CLK_TIMCLK_MOTOR (1 << 6)
#define CLK_TIMCLK_TIMER3 (1 << 5)
#define CLK_TIMCLK_TIMER2 (1 << 4)
#define CLK_TIMCLK_TIMER1 (1 << 3)
#define CLK_TIMCLK_TIMER0 (1 << 2)
#define CLK_TIMCLK_TIMER5 (1 << 1)
#define CLK_TIMCLK_TIMER4 (1 << 0)
/* Timer Clock Control Register bits */
#define CLK_TIMCLK_HSTIMER (1 << 1)
#define CLK_TIMCLK_WATCHDOG (1 << 0)
/* UART Clock Control Register bits */
#define CLK_UART(n) (1 << ((n) - 3))
/* UARTn Clock Select Registers bits */
#define CLK_UART_HCLK (1 << 16)
#define CLK_UART_X_DIV(n) (((n) & 0xFF) << 8)
#define CLK_UART_Y_DIV(n) (((n) & 0xFF) << 0)
/* DMA Clock Control Register bits */
#define CLK_DMA_ENABLE (1 << 0)
/* NAND Clock Control Register bits */
#define CLK_NAND_SLC (1 << 0)
#define CLK_NAND_MLC (1 << 1)
#define CLK_NAND_SLC_SELECT (1 << 2)
#define CLK_NAND_MLC_INT (1 << 5)
/* SSP Clock Control Register bits */
#define CLK_SSP0_ENABLE_CLOCK (1 << 0)
/* SDRAMCLK register bits */
#define CLK_SDRAM_DDR_SEL (1 << 1)
/* USB control register definitions */
#define CLK_USBCTRL_PLL_STS (1 << 0)
#define CLK_USBCTRL_FDBK_PLUS1(n) (((n) & 0xFF) << 1)
#define CLK_USBCTRL_POSTDIV_2POW(n) (((n) & 0x3) << 11)
#define CLK_USBCTRL_PLL_PWRUP (1 << 16)
#define CLK_USBCTRL_CLK_EN1 (1 << 17)
#define CLK_USBCTRL_CLK_EN2 (1 << 18)
#define CLK_USBCTRL_BUS_KEEPER (0x1 << 19)
#define CLK_USBCTRL_USBHSTND_EN (1 << 21)
#define CLK_USBCTRL_USBDVND_EN (1 << 22)
#define CLK_USBCTRL_HCLK_EN (1 << 24)
unsigned int get_sys_clk_rate(void);
unsigned int get_hclk_pll_rate(void);
unsigned int get_hclk_clk_div(void);
unsigned int get_hclk_clk_rate(void);
unsigned int get_periph_clk_div(void);
unsigned int get_periph_clk_rate(void);
unsigned int get_sdram_clk_rate(void);
#endif /* _LPC32XX_CLK_H */