u-boot/board/microchip/pic32mzda
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
..
Kconfig MIPS: Move CONFIG_SYS_TEXT_BASE to Kconfig 2016-05-26 01:34:13 +02:00
MAINTAINERS board: Add Microchip PIC32MZ[DA]-Starter-Kit board. 2016-02-01 22:14:01 +01:00
Makefile board: Add Microchip PIC32MZ[DA]-Starter-Kit board. 2016-02-01 22:14:01 +01:00
pic32mzda.c SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
README board: Add Microchip PIC32MZ[DA]-Starter-Kit board. 2016-02-01 22:14:01 +01:00

/*
 * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
 */

PIC32MZ[DA] Starter Kit
----------------------------------------
PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller.
This family is powered by MIPS M14KEC 32bit general purpose core and has
advanced microcontroller features and peripherals.

This processor boots with proprietary stage1 bootloader running from internal
boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed
on internal program-flash. Finally U-Boot loads OS image (along with other
required files for booting) from either uSD card, or ethernet, or from USB
storage.

To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot
environment file), uImage, *.dtb (platform device-tree-blob file).

U-Boot jumps to Linux using UHI specification.

Visit http://microchip.com for details.