u-boot/arch/arm/mach-uniphier/clk/pll-ld11.c
Masahiro Yamada c72f4d4c2e ARM: uniphier: add PLL init code for LD11 SoC
- Initialize PLLs (SPL initializes only DPLL to save the precious
   SPL memory footprint)
 - Adjust CPLL/MPLL to the final tape-out frequency
 - Set the Cortex-A53 clock to the maximum frequency since it is
   running at 500MHz (SPLL/4) on startup

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23 01:00:23 +09:00

32 lines
813 B
C

/*
* Copyright (C) 2016 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/io.h>
#include "../init.h"
#include "../sc64-regs.h"
#include "pll.h"
void uniphier_ld11_pll_init(void)
{
uniphier_ld20_sscpll_init(SC_CPLLCTRL, 1960, 1, 2); /* 2000MHz -> 1960MHz */
/* do nothing for SPLL */
uniphier_ld20_sscpll_init(SC_MPLLCTRL, 1600, 1, 2); /* 1500MHz -> 1600MHz */
uniphier_ld20_sscpll_init(SC_VSPLLCTRL, UNIPHIER_PLL_FREQ_DEFAULT, 0, 2);
mdelay(1);
uniphier_ld20_sscpll_ssc_en(SC_CPLLCTRL);
uniphier_ld20_sscpll_ssc_en(SC_MPLLCTRL);
uniphier_ld20_sscpll_ssc_en(SC_VSPLLCTRL);
uniphier_ld20_vpll27_init(SC_VPLL27FCTRL);
uniphier_ld20_vpll27_init(SC_VPLL27ACTRL);
writel(0, SC_CA53_GEARSET); /* Gear0: CPLL/2 */
writel(SC_CA_GEARUPD, SC_CA53_GEARUPD);
}