2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-13 23:02:59 +00:00
u-boot/arch/arm/dts/ethernut5.dts
Wenyou Yang 3e9f8f2f51 ARM: dts: ethernut5: Fix the build warning
Fix the building warning as below:
---8<----
Warning (reg_format): "reg" property in /i2c-gpio-0/pcf8563@50 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /i2c-gpio-0/pcf8563@50
Warning (avoid_default_addr_size): Relying on default #size-cells value for /i2c-gpio-0/pcf8563@50
--->8----

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-13 09:24:25 -04:00

96 lines
1.4 KiB
Text

/*
* ethernut5.dts - Device Tree file for Ethernut 5 board
*
* Copyright (C) 2012 egnite GmbH <info@egnite.de>
*
* Licensed under GPLv2.
*/
/dts-v1/;
#include "at91sam9xe.dtsi"
/ {
model = "Ethernut 5";
compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
chosen {
bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
};
memory {
reg = <0x20000000 0x08000000>;
};
clocks {
slow_xtal {
clock-frequency = <32768>;
};
main_xtal {
clock-frequency = <18432000>;
};
};
ahb {
apb {
dbgu: serial@fffff200 {
status = "okay";
};
usart0: serial@fffb0000 {
status = "okay";
};
usart1: serial@fffb4000 {
status = "okay";
};
macb0: ethernet@fffc4000 {
phy-mode = "rmii";
status = "okay";
};
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
gpios = <0
&pioC 14 GPIO_ACTIVE_HIGH
0
>;
root@0 {
label = "root";
reg = <0x0 0x08000000>;
};
data@20000 {
label = "data";
reg = <0x08000000 0x38000000>;
};
};
usb0: ohci@00500000 {
num-ports = <2>;
status = "okay";
};
};
i2c-gpio-0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
pcf8563@50 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
};