u-boot/tools/palmtreo680/flash_u-boot.c
Mike Dunn 3497d43215 pxa: palmtreo680 flash programming utility
This adds a userspace linux utility that writes the u-boot image to an mtd
partition on the docg4 nand flash.

A special utility is required to do this because u-boot is partially loaded by
an initial program loader (IPL) that is permanently programmed to the boot
region of the flash.  This IPL expects the image to be written in a unique
format. The characteristics of this format can be summarized as follows:
  - Flash blocks to be loaded must have a magic number in the oob bytes of the
    first page of the block.
  - Each page must be written redundantly in the subsequent page.
  - The integrated flash controller's "reliable mode" is used, requiring that
    alternate 2k regions (4 pages) are skipped when writing.
For these reasons, a u-boot image can not be written using nandwrite from
mtd-utils.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
2013-06-22 15:25:28 +02:00

177 lines
4.6 KiB
C

/*
* Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
*
* This file is released under the terms of GPL v2 and any later version.
* See the file COPYING in the root directory of the source tree for details.
*
*
* This is a userspace Linux utility that, when run on the Treo 680, will
* program u-boot to flash. The docg4 driver *must* be loaded with the
* reliable_mode and ignore_badblocks parameters enabled:
*
* modprobe docg4 ignore_badblocks=1 reliable_mode=1
*
* This utility writes the concatenated spl + u-boot image to the start of the
* mtd device in the format expected by the IPL/SPL. The image file and mtd
* device node are passed to the utility as arguments. The blocks must have
* been erased beforehand.
*
* When you compile this, note that it links to libmtd from mtd-utils, so ensure
* that your include and lib paths include this.
*/
#include <stdio.h>
#include <stdlib.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>
#include <sys/types.h>
#include <unistd.h>
#include <errno.h>
#include <mtd/mtd-user.h>
#include "libmtd.h"
#define RELIABLE_BLOCKSIZE 0x10000 /* block capacity in reliable mode */
#define STANDARD_BLOCKSIZE 0x40000 /* block capacity in normal mode */
#define PAGESIZE 512
#define PAGES_PER_BLOCK 512
#define OOBSIZE 7 /* available to user (16 total) */
uint8_t ff_oob[OOBSIZE] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
/* this is the magic number the IPL looks for (ASCII "BIPO") */
uint8_t page0_oob[OOBSIZE] = {'B', 'I', 'P', 'O', 0xff, 0xff, 0xff};
int main(int argc, char * const argv[])
{
int devfd, datafd, num_blocks, block;
off_t file_size;
libmtd_t mtd_desc;
struct mtd_dev_info devinfo;
uint8_t *blockbuf;
char response[8];
if (argc != 3) {
printf("usage: %s <image file> <mtd dev node>\n", argv[0]);
return -EINVAL;
}
mtd_desc = libmtd_open();
if (mtd_desc == NULL) {
int errsv = errno;
fprintf(stderr, "can't initialize libmtd\n");
return -errsv;
}
/* open the spl image file and mtd device */
datafd = open(argv[1], O_RDONLY);
if (datafd == -1) {
int errsv = errno;
perror(argv[1]);
return -errsv;
}
devfd = open(argv[2], O_WRONLY);
if (devfd == -1) {
int errsv = errno;
perror(argv[2]);
return -errsv;
}
if (mtd_get_dev_info(mtd_desc, argv[2], &devinfo) < 0) {
int errsv = errno;
perror(argv[2]);
return -errsv;
}
/* determine the number of blocks needed by the image */
file_size = lseek(datafd, 0, SEEK_END);
if (file_size == (off_t)-1) {
int errsv = errno;
perror("lseek");
return -errsv;
}
num_blocks = (file_size + RELIABLE_BLOCKSIZE - 1) / RELIABLE_BLOCKSIZE;
file_size = lseek(datafd, 0, SEEK_SET);
if (file_size == (off_t)-1) {
int errsv = errno;
perror("lseek");
return -errsv;
}
printf("The mtd partition contains %d blocks\n", devinfo.eb_cnt);
printf("U-boot will occupy %d blocks\n", num_blocks);
if (num_blocks > devinfo.eb_cnt) {
fprintf(stderr, "Insufficient blocks on partition\n");
return -EINVAL;
}
printf("IMPORTANT: These blocks must be in an erased state!\n");
printf("Do you want to proceed?\n");
scanf("%s", response);
if ((response[0] != 'y') && (response[0] != 'Y')) {
printf("Exiting\n");
close(devfd);
close(datafd);
return 0;
}
blockbuf = calloc(RELIABLE_BLOCKSIZE, 1);
if (blockbuf == NULL) {
int errsv = errno;
perror("calloc");
return -errsv;
}
for (block = 0; block < num_blocks; block++) {
int ofs, page;
uint8_t *pagebuf = blockbuf, *buf = blockbuf;
uint8_t *oobbuf = page0_oob; /* magic num in oob of 1st page */
size_t len = RELIABLE_BLOCKSIZE;
int ret;
/* read data for one block from file */
while (len) {
ssize_t read_ret = read(datafd, buf, len);
if (read_ret == -1) {
int errsv = errno;
if (errno == EINTR)
continue;
perror("read");
return -errsv;
} else if (read_ret == 0) {
break; /* EOF */
}
len -= read_ret;
buf += read_ret;
}
printf("Block %d: writing\r", block + 1);
fflush(stdout);
for (page = 0, ofs = 0;
page < PAGES_PER_BLOCK;
page++, ofs += PAGESIZE) {
if (page & 0x04) /* Odd-numbered 2k page */
continue; /* skipped in reliable mode */
ret = mtd_write(mtd_desc, &devinfo, devfd, block, ofs,
pagebuf, PAGESIZE, oobbuf, OOBSIZE,
MTD_OPS_PLACE_OOB);
if (ret) {
fprintf(stderr,
"\nmtd_write returned %d on block %d, ofs %x\n",
ret, block + 1, ofs);
return -EIO;
}
oobbuf = ff_oob; /* oob for subsequent pages */
if (page & 0x01) /* odd-numbered subpage */
pagebuf += PAGESIZE;
}
}
printf("\nDone\n");
close(devfd);
close(datafd);
free(blockbuf);
return 0;
}