u-boot/board/atmel/atngw100/atngw100.c
Haavard Skinnemoen d38da53794 AVR32: Make SDRAM refresh rate configurable
The existing code assumes the SDRAM row refresh period should always
be 15.6 us. This is not always true, and indeed on the ATNGW100, the
refresh rate should really be 7.81 us.

Add a refresh_period member to struct sdram_info and initialize it
properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
panic() until the refresh_period member is updated properly.

Big thanks to Gerhard Berghofer for pointing out this issue.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-05 12:14:27 +01:00

76 lines
1.7 KiB
C

/*
* Copyright (C) 2006 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/sdram.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hmatrix2.h>
DECLARE_GLOBAL_DATA_PTR;
static const struct sdram_info sdram = {
.phys_addr = CFG_SDRAM_BASE,
.row_bits = 13,
.col_bits = 9,
.bank_bits = 2,
.cas = 3,
.twr = 2,
.trc = 7,
.trp = 2,
.trcd = 2,
.tras = 5,
.txsr = 5,
/* 7.81 us */
.refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
};
int board_early_init_f(void)
{
/* Set the SDRAM_ENABLE bit in the HEBI SFR */
hmatrix2_writel(SFR4, 1 << 1);
gpio_enable_ebi();
gpio_enable_usart1();
#if defined(CONFIG_MACB)
gpio_enable_macb0();
gpio_enable_macb1();
#endif
#if defined(CONFIG_MMC)
gpio_enable_mmci();
#endif
return 0;
}
long int initdram(int board_type)
{
return sdram_init(&sdram);
}
void board_init_info(void)
{
gd->bd->bi_phy_id[0] = 0x01;
gd->bd->bi_phy_id[1] = 0x03;
}