u-boot/include/generic-phy.h
Neil Armstrong f8da8a82c5 generic-phy: add configure op
Add the PHY configure op callback to the generic PHY uclass to permit
configuring the PHY.

It's useful for MIPI DSI PHYs to setup the link timings.

Signed-off-by:Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-10 10:00:51 +01:00

423 lines
11 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
* Written by Jean-Jacques Hiblot <jjhiblot@ti.com>
*/
#ifndef __GENERIC_PHY_H
#define __GENERIC_PHY_H
#include <dm/ofnode.h>
struct ofnode_phandle_args;
/**
* struct phy - A handle to (allowing control of) a single phy port.
*
* Clients provide storage for phy handles. The content of the structure is
* managed solely by the PHY API and PHY drivers. A phy struct is
* initialized by "get"ing the phy struct. The phy struct is passed to all
* other phy APIs to identify which PHY port to operate upon.
*
* @dev: The device which implements the PHY port.
* @id: The PHY ID within the provider.
*
*/
struct phy {
struct udevice *dev;
unsigned long id;
};
/*
* struct udevice_ops - set of function pointers for phy operations
* @init: operation to be performed for initializing phy (optional)
* @exit: operation to be performed while exiting (optional)
* @reset: reset the phy (optional).
* @power_on: powering on the phy (optional)
* @power_off: powering off the phy (optional)
*/
struct phy_ops {
/**
* of_xlate - Translate a client's device-tree (OF) phy specifier.
*
* The PHY core calls this function as the first step in implementing
* a client's generic_phy_get_by_*() call.
*
* If this function pointer is set to NULL, the PHY core will use a
* default implementation, which assumes #phy-cells = <0> or
* #phy-cells = <1>, and in the later case that the DT cell
* contains a simple integer PHY port ID.
*
* @phy: The phy struct to hold the translation result.
* @args: The phy specifier values from device tree.
* @return 0 if OK, or a negative error code.
*/
int (*of_xlate)(struct phy *phy, struct ofnode_phandle_args *args);
/**
* init - initialize the hardware.
*
* Hardware intialization should not be done in during probe() but
* should be implemented in this init() function. It could be starting
* PLL, taking a controller out of reset, routing, etc. This function
* is typically called only once per PHY port.
* If power_on() is not implemented, it must power up the phy.
*
* @phy: the PHY port to initialize
* @return 0 if OK, or a negative error code.
*/
int (*init)(struct phy *phy);
/**
* exit - de-initialize the PHY device
*
* Hardware de-intialization should be done here. Every step done in
* init() should be undone here.
* This could be used to suspend the phy to reduce power consumption or
* to put the phy in a known condition before booting the OS (though it
* is NOT called automatically before booting the OS)
* If power_off() is not implemented, it must power down the phy.
*
* @phy: PHY port to be de-initialized
* @return 0 if OK, or a negative error code
*/
int (*exit)(struct phy *phy);
/**
* reset - resets a PHY device without shutting down
*
* @phy: PHY port to be reset
*
* During runtime, the PHY may need to be reset in order to
* re-establish connection etc without being shut down or exit.
*
* @return 0 if OK, or a negative error code
*/
int (*reset)(struct phy *phy);
/**
* power_on - power on a PHY device
*
* @phy: PHY port to be powered on
*
* During runtime, the PHY may need to be powered on or off several
* times. This function is used to power on the PHY. It relies on the
* setup done in init(). If init() is not implemented, it must take care
* of setting up the context (PLLs, ...)
*
* @return 0 if OK, or a negative error code
*/
int (*power_on)(struct phy *phy);
/**
* power_off - power off a PHY device
*
* @phy: PHY port to be powered off
*
* During runtime, the PHY may need to be powered on or off several
* times. This function is used to power off the PHY. Except if
* init()/deinit() are not implemented, it must not de-initialize
* everything.
*
* @return 0 if OK, or a negative error code
*/
int (*power_off)(struct phy *phy);
/**
* configure - configure a PHY device
*
* @phy: PHY port to be configured
* @params: PHY Parameters, underlying data is specific to the PHY function
*
* During runtime, the PHY may need to be configured for it's main function.
* This function configures the PHY for it's main function following
* power_on/off() after beeing initialized.
*
* @return 0 if OK, or a negative error code
*/
int (*configure)(struct phy *phy, void *params);
};
/**
* struct phy_bulk - A handle to (allowing control of) a bulk of phys.
*
* Consumers provide storage for the phy bulk. The content of the structure is
* managed solely by the phy API. A phy bulk struct is initialized
* by "get"ing the phy bulk struct.
* The phy bulk struct is passed to all other bulk phy APIs to apply
* the API to all the phy in the bulk struct.
*
* @phys: An array of phy handles.
* @count: The number of phy handles in the phys array.
*/
struct phy_bulk {
struct phy *phys;
unsigned int count;
};
#ifdef CONFIG_PHY
/**
* generic_phy_init() - initialize the PHY port
*
* @phy: the PHY port to initialize
* @return 0 if OK, or a negative error code
*/
int generic_phy_init(struct phy *phy);
/**
* generic_phy_init() - de-initialize the PHY device
*
* @phy: PHY port to be de-initialized
* @return 0 if OK, or a negative error code
*/
int generic_phy_exit(struct phy *phy);
/**
* generic_phy_reset() - resets a PHY device without shutting down
*
* @phy: PHY port to be reset
*@return 0 if OK, or a negative error code
*/
int generic_phy_reset(struct phy *phy);
/**
* generic_phy_power_on() - power on a PHY device
*
* @phy: PHY port to be powered on
* @return 0 if OK, or a negative error code
*/
int generic_phy_power_on(struct phy *phy);
/**
* generic_phy_power_off() - power off a PHY device
*
* @phy: PHY port to be powered off
* @return 0 if OK, or a negative error code
*/
int generic_phy_power_off(struct phy *phy);
/**
* generic_phy_configure() - configure a PHY device
*
* @phy: PHY port to be configured
* @params: PHY Parameters, underlying data is specific to the PHY function
* @return 0 if OK, or a negative error code
*/
int generic_phy_configure(struct phy *phy, void *params);
/**
* generic_phy_get_by_index() - Get a PHY device by integer index.
*
* @user: the client device
* @index: The index in the list of available PHYs
* @phy: A pointer to the PHY port
*
* This looks up a PHY device for a client device based on its position in the
* list of the possible PHYs.
*
* example:
* usb1: usb_otg_ss@xxx {
* compatible = "xxx";
* reg = <xxx>;
* .
* .
* phys = <&usb2_phy>, <&usb3_phy>;
* .
* .
* };
* the USB2 phy can be accessed by passing index '0' and the USB3 phy can
* be accessed by passing index '1'
*
* @return 0 if OK, or a negative error code
*/
int generic_phy_get_by_index(struct udevice *user, int index,
struct phy *phy);
/**
* generic_phy_get_by_index_nodev() - Get a PHY device by integer index
* without a device
*
* @node: The client ofnode.
* @index: The index in the list of available PHYs
* @phy: A pointer to the PHY port
*
* This is a version of generic_phy_get_by_index() that does not use a device.
*
* This looks up a PHY device for a client device based on its ofnode and on
* its position in the list of the possible PHYs.
*
* example:
* usb1: usb_otg_ss@xxx {
* compatible = "xxx";
* reg = <xxx>;
* .
* .
* phys = <&usb2_phy>, <&usb3_phy>;
* .
* .
* };
* the USB2 phy can be accessed by passing index '0' and the USB3 phy can
* be accessed by passing index '1'
*
* @return 0 if OK, or a negative error code
*/
int generic_phy_get_by_index_nodev(ofnode node, int index, struct phy *phy);
/**
* generic_phy_get_by_name() - Get a PHY device by its name.
*
* @user: the client device
* @phy_name: The name of the PHY in the list of possible PHYs
* @phy: A pointer to the PHY port
*
* This looks up a PHY device for a client device in the
* list of the possible PHYs based on its name.
*
* example:
* usb1: usb_otg_ss@xxx {
* compatible = "xxx";
* reg = <xxx>;
* .
* .
* phys = <&usb2_phy>, <&usb3_phy>;
* phy-names = "usb2phy", "usb3phy";
* .
* .
* };
* the USB3 phy can be accessed using "usb3phy", and USB2 by using "usb2phy"
*
* @return 0 if OK, or a negative error code
*/
int generic_phy_get_by_name(struct udevice *user, const char *phy_name,
struct phy *phy);
/**
* generic_phy_get_bulk - Get all phys of a device.
*
* This looks up and gets all phys of the consumer device; each device is
* assumed to have n phys associated with it somehow, and this function finds
* and gets all of them in a separate structure.
*
* @dev: The consumer device.
* @bulk A pointer to a phy bulk struct to initialize.
* @return 0 if OK, or a negative error code.
*/
int generic_phy_get_bulk(struct udevice *dev, struct phy_bulk *bulk);
/**
* generic_phy_init_bulk() - Initialize all phys in a phy bulk struct.
*
* @bulk: A phy bulk struct that was previously successfully requested
* by generic_phy_get_bulk().
* @return 0 if OK, or negative error code.
*/
int generic_phy_init_bulk(struct phy_bulk *bulk);
/**
* generic_phy_exit_bulk() - de-initialize all phys in a phy bulk struct.
*
* @bulk: A phy bulk struct that was previously successfully requested
* by generic_phy_get_bulk().
* @return 0 if OK, or negative error code.
*/
int generic_phy_exit_bulk(struct phy_bulk *bulk);
/**
* generic_phy_power_on_bulk() - Power on all phys in a phy bulk struct.
*
* @bulk: A phy bulk struct that was previously successfully requested
* by generic_phy_get_bulk().
* @return 0 if OK, or negative error code.
*/
int generic_phy_power_on_bulk(struct phy_bulk *bulk);
/**
* generic_phy_power_off_bulk() - Power off all phys in a phy bulk struct.
*
* @bulk: A phy bulk struct that was previously successfully requested
* by generic_phy_get_bulk().
* @return 0 if OK, or negative error code.
*/
int generic_phy_power_off_bulk(struct phy_bulk *bulk);
#else /* CONFIG_PHY */
static inline int generic_phy_init(struct phy *phy)
{
return 0;
}
static inline int generic_phy_exit(struct phy *phy)
{
return 0;
}
static inline int generic_phy_reset(struct phy *phy)
{
return 0;
}
static inline int generic_phy_power_on(struct phy *phy)
{
return 0;
}
static inline int generic_phy_power_off(struct phy *phy)
{
return 0;
}
static inline int generic_phy_get_by_index(struct udevice *user, int index,
struct phy *phy)
{
return 0;
}
static inline int generic_phy_get_by_name(struct udevice *user, const char *phy_name,
struct phy *phy)
{
return 0;
}
static inline int
generic_phy_get_bulk(struct udevice *dev, struct phy_bulk *bulk)
{
return 0;
}
static inline int generic_phy_init_bulk(struct phy_bulk *bulk)
{
return 0;
}
static inline int generic_phy_exit_bulk(struct phy_bulk *bulk)
{
return 0;
}
static inline int generic_phy_power_on_bulk(struct phy_bulk *bulk)
{
return 0;
}
static inline int generic_phy_power_off_bulk(struct phy_bulk *bulk)
{
return 0;
}
#endif /* CONFIG_PHY */
/**
* generic_phy_valid() - check if PHY port is valid
*
* @phy: the PHY port to check
* @return TRUE if valid, or FALSE
*/
static inline bool generic_phy_valid(struct phy *phy)
{
return phy && phy->dev;
}
#endif /*__GENERIC_PHY_H */