mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
6d0f6bcf33
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
486 lines
17 KiB
C
486 lines
17 KiB
C
/*
|
|
* (C) Copyright 2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
* Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* board/config.h - configuration options, board specific
|
|
*/
|
|
|
|
/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
|
|
* U-BOOT port on RPXlite board
|
|
*/
|
|
|
|
/*
|
|
* Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
|
|
* U-BOOT port on RPXlite DW version board--RPXlite_DW
|
|
* June 8 ,2004
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
/* #define DEBUG 1 */
|
|
/* #define DEPLOYMENT 1 */
|
|
|
|
#undef CONFIG_MPC860
|
|
#define CONFIG_MPC823 1 /* This is a MPC823e CPU. */
|
|
#define CONFIG_RPXLITE 1 /* RPXlite DW version board */
|
|
|
|
#ifdef CONFIG_LCD /* with LCD controller ? */
|
|
#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
|
|
#endif
|
|
|
|
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
|
|
#undef CONFIG_8xx_CONS_SMC2
|
|
#undef CONFIG_8xx_CONS_NONE
|
|
#define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */
|
|
|
|
#ifdef DEBUG
|
|
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
|
#else
|
|
#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */
|
|
|
|
#ifdef DEPLOYMENT
|
|
#define CONFIG_BOOT_RETRY_TIME -1
|
|
#define CONFIG_AUTOBOOT_KEYED
|
|
#define CONFIG_AUTOBOOT_PROMPT \
|
|
"autoboot in %d seconds (stop with 'st')...\n", bootdelay
|
|
#define CONFIG_AUTOBOOT_STOP_STR "st"
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
|
#define CONFIG_RESET_TO_RETRY 1
|
|
#define CONFIG_BOOT_RETRY_MIN 1
|
|
#endif /* DEPLOYMENT */
|
|
#endif /* DEBUG */
|
|
|
|
/* pre-boot commands */
|
|
#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 " \
|
|
"root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"flash_nfs=run nfsargs addip;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"flash_self=run ramargs addip;" \
|
|
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
|
|
"gatewayip=172.16.115.254\0" \
|
|
"netmask=255.255.255.0\0" \
|
|
"kernel_addr=ff040000\0" \
|
|
"ramdisk_addr=ff200000\0" \
|
|
"ku=era ${kernel_addr} ff1fffff;cp.b 100000 ${kernel_addr} " \
|
|
"${filesize};md ${kernel_addr};" \
|
|
"echo kernel updating finished\0" \
|
|
"uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 " \
|
|
"${filesize};md ff000000;" \
|
|
"echo u-boot updating finished\0" \
|
|
"eu=protect off 1:6;era 1:6;reset\0" \
|
|
"lcd=setenv stdout lcd;setenv stdin lcd\0" \
|
|
"ser=setenv stdout serial;setenv stdin serial\0" \
|
|
"verify=no"
|
|
|
|
#define CONFIG_BOOTCOMMAND "run flash_self"
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
#undef CONFIG_STATUS_LED /* disturbs display. Status LED disabled. */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
|
|
#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you
|
|
don't want the advanced function */
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_DHCP
|
|
|
|
#ifdef CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_CMD_BMP
|
|
#endif
|
|
|
|
|
|
/* test-only */
|
|
#define CONFIG_SYS_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
|
|
#define CONFIG_SYS_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
|
|
|
|
#define CONFIG_NETCONSOLE
|
|
|
|
#endif /* 1 */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "u-boot>" /* Monitor Command Prompt */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x0040000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*/
|
|
/*-----------------------------------------------------------------------
|
|
* Internal Memory Mapped Register
|
|
*/
|
|
#define CONFIG_SYS_IMMR 0xFA200000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
|
|
#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_FLASH_BASE 0xFF000000
|
|
|
|
#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
#else
|
|
#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE 0xFF000000
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_NVRAM
|
|
#define CONFIG_ENV_ADDR 0xFA000100
|
|
#define CONFIG_ENV_SIZE 0x1000
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x30000 /* Offset of Environment Sector */
|
|
#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
|
|
#endif /* CONFIG_ENV_IS_IN_NVRAM */
|
|
|
|
#define CONFIG_SYS_RESET_ADDRESS ((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SYPCR - System Protection Control 32-bit 12-35
|
|
* SYPCR can only be written once after reset!
|
|
*-----------------------------------------------------------------------
|
|
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
|
|
*/
|
|
#if defined(CONFIG_WATCHDOG)
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
|
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
|
#else
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
|
|
#endif /* We can get SYPCR: 0xFFFF0689. */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SIUMCR - SIU Module Configuration 32-bit 12-30
|
|
*-----------------------------------------------------------------------
|
|
* PCMCIA config., multi-function pin tri-state
|
|
*/
|
|
#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) /* SIUMCR:0x00000800 */
|
|
|
|
/*---------------------------------------------------------------------
|
|
* TBSCR - Time Base Status and Control 16-bit 12-16
|
|
*---------------------------------------------------------------------
|
|
* Clear Reference Interrupt Status, Timebase freezing enabled
|
|
*/
|
|
#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
|
|
/* TBSCR: 0x00C3 [SAM] */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* RTCSC - Real-Time Clock Status and Control Register 16-bit 12-18
|
|
*-----------------------------------------------------------------------
|
|
* [RTC enabled but not stopped on FRZ]
|
|
*/
|
|
#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) /* RTCSC:0x00C1 */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PISCR - Periodic Interrupt Status and Control 16-bit 12-23
|
|
*-----------------------------------------------------------------------
|
|
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
|
|
* [Periodic timer enabled,Periodic timer interrupt disable. ]
|
|
*/
|
|
#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) /* PISCR:0x0083 */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PLPRCR - PLL, Low-Power, and Reset Control Register 32-bit 5-7
|
|
*-----------------------------------------------------------------------
|
|
* Reset PLL lock status sticky bit, timer expired status bit and timer
|
|
* interrupt status bit
|
|
*/
|
|
/* up to 64 MHz we use a 1:2 clock */
|
|
#if defined(RPXlite_64MHz)
|
|
#define CONFIG_SYS_PLPRCR ( (7 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) /*PLPRCR: 0x00700000. */
|
|
#else
|
|
#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SCCR - System Clock and reset Control Register 5-3
|
|
*-----------------------------------------------------------------------
|
|
* Set clock output, timebase and RTC source and divider,
|
|
* power management and some other internal clocks
|
|
*/
|
|
#define SCCR_MASK SCCR_EBDF00
|
|
/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
|
|
#if defined(RPXlite_64MHz)
|
|
#define CONFIG_SYS_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */
|
|
#else
|
|
#define CONFIG_SYS_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCMCIA stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
|
|
#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
|
|
#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
|
|
#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
|
|
#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
|
|
#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
|
|
#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
|
|
#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
|
|
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
#undef CONFIG_IDE_RESET /* reset for ide not supported */
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
|
|
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
|
|
|
|
/* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
|
|
|
|
/* Offset for normal register accesses */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
|
|
|
|
/* Offset for alternate registers */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
|
|
|
|
#define CONFIG_SYS_DER 0
|
|
|
|
/*
|
|
* Init Memory Controller:
|
|
*
|
|
* BR0 and OR0 (FLASH)
|
|
*/
|
|
#define FLASH_BASE_PRELIM 0xFC000000 /* FLASH base */
|
|
#define CONFIG_SYS_PRELIM_OR_AM 0xFC000000 /* OR addr mask */
|
|
|
|
/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 8, ETHR = 0, BIH = 1 */
|
|
#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_8_CLK | OR_BI)
|
|
#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
|
|
#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
|
|
|
|
/*
|
|
* BR1 and OR1 (SDRAM)
|
|
*
|
|
*/
|
|
#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */
|
|
#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB in system */
|
|
|
|
/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
|
|
#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00
|
|
#define CONFIG_SYS_OR_AM_SDRAM (-(SDRAM_MAX_SIZE & OR_AM_MSK))
|
|
#define CONFIG_SYS_OR1_PRELIM ( CONFIG_SYS_OR_AM_SDRAM | CONFIG_SYS_OR_TIMING_SDRAM )
|
|
#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
|
|
|
|
/* RPXlite mem setting */
|
|
#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* BCSR */
|
|
#define CONFIG_SYS_OR3_PRELIM 0xFF7F8900
|
|
#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */
|
|
#define CONFIG_SYS_OR4_PRELIM 0xFFFE0040
|
|
|
|
/*
|
|
* Memory Periodic Timer Prescaler
|
|
*/
|
|
/* periodic timer for refresh */
|
|
#if defined(RPXlite_64MHz)
|
|
#define CONFIG_SYS_MAMR_PTA 32
|
|
#else
|
|
#define CONFIG_SYS_MAMR_PTA 20
|
|
#endif
|
|
|
|
/*
|
|
* Refresh clock Prescalar
|
|
*/
|
|
#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV2
|
|
|
|
/*
|
|
* MAMR settings for SDRAM
|
|
*/
|
|
|
|
/* 9 column SDRAM */
|
|
#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
|
|
MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10)
|
|
/* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
|
|
/* Configuration variable added by yooth. */
|
|
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
|
|
/*
|
|
* BCSRx
|
|
*
|
|
* Board Status and Control Registers
|
|
*
|
|
*/
|
|
#define BCSR0 0xFA400000
|
|
#define BCSR1 0xFA400001
|
|
#define BCSR2 0xFA400002
|
|
#define BCSR3 0xFA400003
|
|
|
|
#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */
|
|
#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
|
|
#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */
|
|
#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */
|
|
#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */
|
|
#define BCSR0_COLTEST 0x20
|
|
#define BCSR0_ETHLPBK 0x40
|
|
#define BCSR0_ETHEN 0x80
|
|
|
|
#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */
|
|
#define BCSR1_PCVCTL6 0x02
|
|
#define BCSR1_PCVCTL5 0x04
|
|
#define BCSR1_PCVCTL4 0x08
|
|
#define BCSR1_IPB5SEL 0x10
|
|
|
|
#define BCSR1_SMC1CTS 0x40 /* Added by SAM. */
|
|
#define BCSR1_SMC1TRS 0x80 /* Added by SAM. */
|
|
|
|
#define BCSR2_ENRTCIRQ 0x01 /* Added by SAM. */
|
|
#define BCSR2_ENBRG1 0x04 /* Added by SAM. */
|
|
|
|
#define BCSR2_ENPA5HDR 0x08 /* USB Control */
|
|
#define BCSR2_ENUSBCLK 0x10
|
|
#define BCSR2_USBPWREN 0x20
|
|
#define BCSR2_USBSPD 0x40
|
|
#define BCSR2_USBSUSP 0x80
|
|
|
|
#define BCSR3_BWKAPWR 0x01 /* Changed by SAM. Backup battery situation */
|
|
#define BCSR3_IRQRTC 0x02 /* Changed by SAM. NVRAM Battery */
|
|
#define BCSR3_RDY_BSY 0x04 /* Changed by SAM. Flash Operation */
|
|
#define BCSR3_MPLX_LIN 0x08 /* Changed by SAM. Linear or Multiplexed address Mode */
|
|
|
|
#define BCSR3_D27 0x10 /* Dip Switch settings */
|
|
#define BCSR3_D26 0x20
|
|
#define BCSR3_D25 0x40
|
|
#define BCSR3_D24 0x80
|
|
|
|
/*
|
|
* Environment setting
|
|
*/
|
|
#define CONFIG_ETHADDR 00:10:EC:00:37:5B
|
|
#define CONFIG_IPADDR 172.16.115.7
|
|
#define CONFIG_SERVERIP 172.16.115.6
|
|
#define CONFIG_ROOTPATH /workspace/myfilesystem/target/
|
|
#define CONFIG_BOOTFILE uImage.rpxusb
|
|
#define CONFIG_HOSTNAME LITE_H1_DW
|
|
|
|
#endif /* __CONFIG_H */
|