u-boot/board/cogent/serial.c
2002-11-03 00:24:07 +00:00

190 lines
4.7 KiB
C

/*
* Simple serial driver for Cogent motherboard serial ports
* for use during boot
*/
#include <common.h>
#include <board/cogent/serial.h>
#if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
#if (defined(CONFIG_8xx) && defined(CONFIG_8xx_CONS_NONE)) || \
(defined(CONFIG_8260) && defined(CONFIG_CONS_NONE))
#if CONFIG_CONS_INDEX == 1
#define CMA_MB_SERIAL_BASE CMA_MB_SERIALA_BASE
#elif CONFIG_CONS_INDEX == 2
#define CMA_MB_SERIAL_BASE CMA_MB_SERIALB_BASE
#elif CONFIG_CONS_INDEX == 3 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_SERIAL_BASE CMA_MB_SER2A_BASE
#elif CONFIG_CONS_INDEX == 4 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_SERIAL_BASE CMA_MB_SER2B_BASE
#else
#error CONFIG_CONS_INDEX must be configured for Cogent motherboard serial
#endif
int serial_init (void)
{
/* DECLARE_GLOBAL_DATA_PTR; */
cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
cma_mb_reg_write(&mbsp->ser_ier, 0x00); /* turn off interrupts */
serial_setbrg ();
cma_mb_reg_write(&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */
cma_mb_reg_write(&mbsp->ser_mcr, 0x03); /* RTS/DTR */
cma_mb_reg_write(&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */
return (0);
}
void
serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;
cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
unsigned int divisor;
unsigned char lcr;
if ((divisor = br_to_div(gd->baudrate)) == 0)
divisor = DEFDIV;
lcr = cma_mb_reg_read(&mbsp->ser_lcr);
cma_mb_reg_write(&mbsp->ser_lcr, lcr|0x80);/* Access baud rate(set DLAB)*/
cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff);
cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff);
cma_mb_reg_write(&mbsp->ser_lcr, lcr); /* unset DLAB */
}
void
serial_putc(const char c)
{
cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
if (c == '\n')
serial_putc('\r');
while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0)
;
cma_mb_reg_write(&mbsp->ser_thr, c);
}
void
serial_puts(const char *s)
{
while (*s != '\0')
serial_putc(*s++);
}
int
serial_getc(void)
{
cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0)
;
return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f);
}
int
serial_tstc(void)
{
cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
return ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) != 0);
}
#endif /* CONS_NONE */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) && \
defined(CONFIG_KGDB_NONE)
#if CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
#error Console and kgdb are on the same serial port - this is not supported
#endif
#if CONFIG_KGDB_INDEX == 1
#define CMA_MB_KGDB_SER_BASE CMA_MB_SERIALA_BASE
#elif CONFIG_KGDB_INDEX == 2
#define CMA_MB_KGDB_SER_BASE CMA_MB_SERIALB_BASE
#elif CONFIG_KGDB_INDEX == 3 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_KGDB_SER_BASE CMA_MB_SER2A_BASE
#elif CONFIG_KGDB_INDEX == 4 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
#define CMA_MB_KGDB_SER_BASE CMA_MB_SER2B_BASE
#else
#error CONFIG_KGDB_INDEX must be configured for Cogent motherboard serial
#endif
void
kgdb_serial_init(void)
{
cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
unsigned int divisor;
if ((divisor = br_to_div(CONFIG_KGDB_BAUDRATE)) == 0)
divisor = DEFDIV;
cma_mb_reg_write(&mbsp->ser_ier, 0x00); /* turn off interrupts */
cma_mb_reg_write(&mbsp->ser_lcr, 0x80); /* Access baud rate(set DLAB)*/
cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff);
cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff);
cma_mb_reg_write(&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */
cma_mb_reg_write(&mbsp->ser_mcr, 0x03); /* RTS/DTR */
cma_mb_reg_write(&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */
printf("[on cma10x serial port B] ");
}
void
putDebugChar(int c)
{
cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0)
;
cma_mb_reg_write(&mbsp->ser_thr, c & 0xff);
}
void
putDebugStr(const char *str)
{
while (*str != '\0') {
if (*str == '\n')
putDebugChar('\r');
putDebugChar(*str++);
}
}
int
getDebugChar(void)
{
cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0)
;
return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f);
}
void
kgdb_interruptible(int yes)
{
cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
if (yes == 1) {
printf("kgdb: turning serial ints on\n");
cma_mb_reg_write(&mbsp->ser_ier, 0xf);
}
else {
printf("kgdb: turning serial ints off\n");
cma_mb_reg_write(&mbsp->ser_ier, 0x0);
}
}
#endif /* KGDB && KGDB_NONE */
#endif /* CAPS & SERPAR */