u-boot/configs/microblaze-generic_defconfig
Michal Simek c5ba6357b3 microblaze: Enable cache by default
The whole cache code needs to be redesign to read information about cache
from DT instead of macro selection. Enable caches by default because
systems have caches on by default for Linux.

Also enable CMD_CACHE to be able to disable cache if there is any issue.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00

75 lines
1.8 KiB
Text

CONFIG_MICROBLAZE=y
CONFIG_SYS_TEXT_BASE=0x29000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_TARGET_MICROBLAZE_GENERIC=y
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=-1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=romfs"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="echo U-BOOT for ${hostname};setenv preboot;echo"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_DISPLAY_BOARDINFO=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_OS_BASE=0x2c060000
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="U-Boot-mONStR> "
CONFIG_CMD_IMLS=y
CONFIG_CMD_SPL=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_SAVES=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_JFFS2=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
CONFIG_NETCONSOLE=y
CONFIG_SPL_DM=y
CONFIG_XILINX_GPIO=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_DEVICE=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_PHY_ATHEROS=y
CONFIG_PHY_BROADCOM=y
CONFIG_PHY_DAVICOM=y
CONFIG_PHY_LXT=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_DM_ETH=y
CONFIG_XILINX_AXIEMAC=y
CONFIG_XILINX_EMACLITE=y
CONFIG_SYS_NS16550=y
CONFIG_XILINX_UARTLITE=y
CONFIG_SYSRESET_GPIO=y
CONFIG_SYSRESET_MICROBLAZE=y
CONFIG_WDT=y
CONFIG_XILINX_TB_WATCHDOG=y