2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-30 06:53:09 +00:00
u-boot/arch/arm/dts/bcm2835-rpi.dtsi
Simon Glass 9ae600e9e2 arm: rpi: Sync rpi dts files from Linux
Sync these files, obtained from Linux v5.15.

This adds a devicetree file for rpi_4 which was not there before.

Testing shows no change so far as I can see:
- boots to U-Boot prompt on rpi0, rpi2
- boots to distro on rpi3
- boots to distro on rpi4

I am assuming that syncing with Linux is safe, but the maintainer should
know for sure.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23 10:24:39 -05:00

81 lines
1.3 KiB
Text

#include <dt-bindings/power/raspberrypi-power.h>
/ {
leds {
compatible = "gpio-leds";
led-act {
label = "ACT";
default-state = "keep";
linux,default-trigger = "heartbeat";
};
};
soc {
firmware: firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
mboxes = <&mailbox>;
dma-ranges;
};
power: power {
compatible = "raspberrypi,bcm2835-power";
firmware = <&firmware>;
#power-domain-cells = <1>;
};
vchiq: mailbox@7e00b840 {
compatible = "brcm,bcm2835-vchiq";
reg = <0x7e00b840 0x3c>;
interrupts = <0 2>;
};
};
};
&gpio {
pinctrl-names = "default";
gpioout: gpioout {
brcm,pins = <6>;
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
};
alt0: alt0 {
brcm,pins = <4 5 7 8 9 10 11>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_gpio0>;
status = "okay";
clock-frequency = <100000>;
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_gpio2>;
status = "okay";
clock-frequency = <100000>;
};
&usb {
power-domains = <&power RPI_POWER_DOMAIN_USB>;
};
&vec {
power-domains = <&power RPI_POWER_DOMAIN_VEC>;
status = "okay";
};
&dsi0 {
power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
};
&dsi1 {
power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
};