mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-29 08:01:08 +00:00
2a766db938
U-Boot README recommends initializing SDRAM in board_init_f(). DA850
was doing it as part of board_init_r() (through call to spl_board_init()
which calls arch_cpu_init() which calls da850_ddr_setup())
This worked fine till commit 15b8c75058 ("davinci:
da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full") moved
BSS to SDRAM.
Functions like mmc_initialize() called in board_init_r() assume BSS is
available. Since SDRAM was not initialized when arch/arm/lib/crt0.S tried
to initialize BSS to 0, BSS is not initialized correctly.
Fix this by simply calling arch_cpu_init() from board_init_f(). Also move
preloader_console_init() there to help debug issues with board_init_r().
With this spl_board_init() is no longer needed, we remove it.
Tested using MMC/SD boot on OMAP-L138 LCDK board.
Tested-by: Adam Ford <aford173@gmail.com> #da850evm
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Tested-by: Peter Howard <phoward@gme.net.au> #omapl138_lcdk
57 lines
1.4 KiB
Text
57 lines
1.4 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_DAVINCI=y
|
|
CONFIG_SYS_TEXT_BASE=0xc1080000
|
|
CONFIG_TARGET_OMAPL138_LCDK=y
|
|
CONFIG_SYS_DA850_PLL0_POSTDIV=0
|
|
CONFIG_SYS_DA850_PLL1_PLLDIV3=0x8003
|
|
CONFIG_TI_COMMON_CMD_OPTIONS=y
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_SPL_MMC_SUPPORT=y
|
|
CONFIG_SPL_SERIAL_SUPPORT=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_SPL=y
|
|
CONFIG_BOOTDELAY=3
|
|
CONFIG_LOGLEVEL=3
|
|
CONFIG_MISC_INIT_R=y
|
|
CONFIG_VERSION_VARIABLE=y
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_BOARD_EARLY_INIT_F=y
|
|
CONFIG_SPL_TEXT_BASE=0x80000000
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5
|
|
CONFIG_SPL_NAND_SUPPORT=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CRC32_VERIFY=y
|
|
# CONFIG_CMD_EEPROM is not set
|
|
# CONFIG_CMD_FLASH is not set
|
|
# CONFIG_CMD_GPIO is not set
|
|
CONFIG_CMD_NAND=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_CMD_DIAG=y
|
|
CONFIG_CMD_UBI=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk"
|
|
CONFIG_ENV_IS_IN_NAND=y
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_DM=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_DM_I2C_COMPAT=y
|
|
CONFIG_SYS_I2C_DAVINCI=y
|
|
CONFIG_DM_MMC=y
|
|
CONFIG_NAND=y
|
|
CONFIG_NAND_DAVINCI=y
|
|
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
|
|
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
|
|
CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000
|
|
CONFIG_SPL_NAND_SIMPLE=y
|
|
CONFIG_SPI_FLASH=y
|
|
CONFIG_SF_DEFAULT_SPEED=30000000
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
CONFIG_SPI_FLASH_WINBOND=y
|
|
CONFIG_MII=y
|
|
CONFIG_DRIVER_TI_EMAC=y
|
|
CONFIG_DM_SERIAL=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DAVINCI_SPI=y
|