mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 05:04:26 +00:00
a9ca4193bd
Add driver to handle TI specific wrapper for Cadence USB3 controller present on J721e SoC. Based on Linux driver for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
193 lines
4.5 KiB
C
193 lines
4.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/**
|
|
* cdns_ti-ti.c - TI specific Glue layer for Cadence USB Controller
|
|
*
|
|
* Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm-generic/io.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <linux/io.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <malloc.h>
|
|
|
|
#include "core.h"
|
|
|
|
/* USB Wrapper register offsets */
|
|
#define USBSS_PID 0x0
|
|
#define USBSS_W1 0x4
|
|
#define USBSS_STATIC_CONFIG 0x8
|
|
#define USBSS_PHY_TEST 0xc
|
|
#define USBSS_DEBUG_CTRL 0x10
|
|
#define USBSS_DEBUG_INFO 0x14
|
|
#define USBSS_DEBUG_LINK_STATE 0x18
|
|
#define USBSS_DEVICE_CTRL 0x1c
|
|
|
|
/* Wrapper 1 register bits */
|
|
#define USBSS_W1_PWRUP_RST BIT(0)
|
|
#define USBSS_W1_OVERCURRENT_SEL BIT(8)
|
|
#define USBSS_W1_MODESTRAP_SEL BIT(9)
|
|
#define USBSS_W1_OVERCURRENT BIT(16)
|
|
#define USBSS_W1_MODESTRAP_MASK GENMASK(18, 17)
|
|
#define USBSS_W1_MODESTRAP_SHIFT 17
|
|
#define USBSS_W1_USB2_ONLY BIT(19)
|
|
|
|
/* Static config register bits */
|
|
#define USBSS1_STATIC_PLL_REF_SEL_MASK GENMASK(8, 5)
|
|
#define USBSS1_STATIC_PLL_REF_SEL_SHIFT 5
|
|
#define USBSS1_STATIC_LOOPBACK_MODE_MASK GENMASK(4, 3)
|
|
#define USBSS1_STATIC_LOOPBACK_MODE_SHIFT 3
|
|
#define USBSS1_STATIC_VBUS_SEL_MASK GENMASK(2, 1)
|
|
#define USBSS1_STATIC_VBUS_SEL_SHIFT 1
|
|
#define USBSS1_STATIC_LANE_REVERSE BIT(0)
|
|
|
|
/* Modestrap modes */
|
|
enum modestrap_mode { USBSS_MODESTRAP_MODE_NONE,
|
|
USBSS_MODESTRAP_MODE_HOST,
|
|
USBSS_MODESTRAP_MODE_PERIPHERAL};
|
|
|
|
struct cdns_ti {
|
|
struct udevice *dev;
|
|
void __iomem *usbss;
|
|
int usb2_only:1;
|
|
int vbus_divider:1;
|
|
struct clk *usb2_refclk;
|
|
struct clk *lpm_clk;
|
|
};
|
|
|
|
static const int cdns_ti_rate_table[] = { /* in KHZ */
|
|
9600,
|
|
10000,
|
|
12000,
|
|
19200,
|
|
20000,
|
|
24000,
|
|
25000,
|
|
26000,
|
|
38400,
|
|
40000,
|
|
58000,
|
|
50000,
|
|
52000,
|
|
};
|
|
|
|
static inline u32 cdns_ti_readl(struct cdns_ti *data, u32 offset)
|
|
{
|
|
return readl(data->usbss + offset);
|
|
}
|
|
|
|
static inline void cdns_ti_writel(struct cdns_ti *data, u32 offset, u32 value)
|
|
{
|
|
writel(value, data->usbss + offset);
|
|
}
|
|
|
|
static int cdns_ti_probe(struct udevice *dev)
|
|
{
|
|
struct cdns_ti *data = dev_get_platdata(dev);
|
|
struct clk usb2_refclk;
|
|
int modestrap_mode;
|
|
unsigned long rate;
|
|
int rate_code, i;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
data->dev = dev;
|
|
|
|
data->usbss = dev_remap_addr_index(dev, 0);
|
|
if (!data->usbss)
|
|
return -EINVAL;
|
|
|
|
ret = clk_get_by_name(dev, "usb2_refclk", &usb2_refclk);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get usb2_refclk\n");
|
|
return ret;
|
|
}
|
|
|
|
rate = clk_get_rate(&usb2_refclk);
|
|
rate /= 1000; /* To KHz */
|
|
for (i = 0; i < ARRAY_SIZE(cdns_ti_rate_table); i++) {
|
|
if (cdns_ti_rate_table[i] == rate)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(cdns_ti_rate_table)) {
|
|
dev_err(dev, "unsupported usb2_refclk rate: %lu KHz\n", rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rate_code = i;
|
|
|
|
/* assert RESET */
|
|
reg = cdns_ti_readl(data, USBSS_W1);
|
|
reg &= ~USBSS_W1_PWRUP_RST;
|
|
cdns_ti_writel(data, USBSS_W1, reg);
|
|
|
|
/* set static config */
|
|
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
|
|
reg &= ~USBSS1_STATIC_PLL_REF_SEL_MASK;
|
|
reg |= rate_code << USBSS1_STATIC_PLL_REF_SEL_SHIFT;
|
|
|
|
reg &= ~USBSS1_STATIC_VBUS_SEL_MASK;
|
|
data->vbus_divider = dev_read_bool(dev, "ti,vbus-divider");
|
|
if (data->vbus_divider)
|
|
reg |= 1 << USBSS1_STATIC_VBUS_SEL_SHIFT;
|
|
|
|
cdns_ti_writel(data, USBSS_STATIC_CONFIG, reg);
|
|
reg = cdns_ti_readl(data, USBSS_STATIC_CONFIG);
|
|
|
|
/* set USB2_ONLY mode if requested */
|
|
reg = cdns_ti_readl(data, USBSS_W1);
|
|
data->usb2_only = dev_read_bool(dev, "ti,usb2-only");
|
|
if (data->usb2_only)
|
|
reg |= USBSS_W1_USB2_ONLY;
|
|
|
|
/* set modestrap */
|
|
if (dev_read_bool(dev, "ti,modestrap-host"))
|
|
modestrap_mode = USBSS_MODESTRAP_MODE_HOST;
|
|
else if (dev_read_bool(dev, "ti,modestrap-peripheral"))
|
|
modestrap_mode = USBSS_MODESTRAP_MODE_PERIPHERAL;
|
|
else
|
|
modestrap_mode = USBSS_MODESTRAP_MODE_NONE;
|
|
|
|
reg |= USBSS_W1_MODESTRAP_SEL;
|
|
reg &= ~USBSS_W1_MODESTRAP_MASK;
|
|
reg |= modestrap_mode << USBSS_W1_MODESTRAP_SHIFT;
|
|
cdns_ti_writel(data, USBSS_W1, reg);
|
|
|
|
/* de-assert RESET */
|
|
reg |= USBSS_W1_PWRUP_RST;
|
|
cdns_ti_writel(data, USBSS_W1, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdns_ti_remove(struct udevice *dev)
|
|
{
|
|
struct cdns_ti *data = dev_get_platdata(dev);
|
|
u32 reg;
|
|
|
|
/* put device back to RESET*/
|
|
reg = cdns_ti_readl(data, USBSS_W1);
|
|
reg &= ~USBSS_W1_PWRUP_RST;
|
|
cdns_ti_writel(data, USBSS_W1, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id cdns_ti_of_match[] = {
|
|
{ .compatible = "ti,j721e-usb", },
|
|
{},
|
|
};
|
|
|
|
U_BOOT_DRIVER(cdns_ti) = {
|
|
.name = "cdns-ti",
|
|
.id = UCLASS_NOP,
|
|
.of_match = cdns_ti_of_match,
|
|
.bind = cdns3_bind,
|
|
.probe = cdns_ti_probe,
|
|
.remove = cdns_ti_remove,
|
|
.platdata_auto_alloc_size = sizeof(struct cdns_ti),
|
|
.flags = DM_FLAG_OS_PREPARE,
|
|
};
|