mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 05:04:26 +00:00
9a03e50c5f
j721e SoCs have different OPP tables. Add support for the same. Note: DM Still has lot of voltages TBD hence the correct values need to be programmed once they are published. Signed-off-by: Keerthy <j-keerthy@ti.com>
388 lines
8.3 KiB
C
388 lines
8.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Texas Instruments' K3 Clas 0 Adaptive Voltage Scaling driver
|
|
*
|
|
* Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Tero Kristo <t-kristo@ti.com>
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <i2c.h>
|
|
#include <k3-avs.h>
|
|
#include <power/regulator.h>
|
|
|
|
#define AM6_VTM_DEVINFO(i) (priv->base + 0x100 + 0x20 * (i))
|
|
#define AM6_VTM_OPPVID_VD(i) (priv->base + 0x104 + 0x20 * (i))
|
|
|
|
#define AM6_VTM_AVS0_SUPPORTED BIT(12)
|
|
|
|
#define AM6_VTM_OPP_SHIFT(opp) (8 * (opp))
|
|
#define AM6_VTM_OPP_MASK 0xff
|
|
|
|
#define VD_FLAG_INIT_DONE BIT(0)
|
|
|
|
struct k3_avs_privdata {
|
|
void *base;
|
|
struct vd_config *vd_config;
|
|
};
|
|
|
|
struct opp {
|
|
u32 freq;
|
|
u32 volt;
|
|
};
|
|
|
|
struct vd_data {
|
|
int id;
|
|
u8 opp;
|
|
u8 flags;
|
|
int dev_id;
|
|
int clk_id;
|
|
struct opp opps[NUM_OPPS];
|
|
struct udevice *supply;
|
|
};
|
|
|
|
struct vd_config {
|
|
struct vd_data *vds;
|
|
u32 (*efuse_xlate)(struct k3_avs_privdata *priv, int idx, int opp);
|
|
};
|
|
|
|
static struct k3_avs_privdata *k3_avs_priv;
|
|
|
|
/**
|
|
* am6_efuse_voltage: read efuse voltage from VTM
|
|
* @priv: driver private data
|
|
* @idx: VD to read efuse for
|
|
* @opp: opp id to read
|
|
*
|
|
* Reads efuse value for the specified OPP, and converts the register
|
|
* value to a voltage. Returns the voltage in uV, or 0 if nominal voltage
|
|
* should be used.
|
|
*
|
|
* Efuse val to volt conversion logic:
|
|
*
|
|
* val > 171 volt increments in 20mV steps with base 171 => 1.66V
|
|
* val between 115 to 11 increments in 10mV steps with base 115 => 1.1V
|
|
* val between 15 to 115 increments in 5mV steps with base 15 => .6V
|
|
* val between 1 to 15 increments in 20mv steps with base 0 => .3V
|
|
* val 0 is invalid
|
|
*/
|
|
static u32 am6_efuse_xlate(struct k3_avs_privdata *priv, int idx, int opp)
|
|
{
|
|
u32 val = readl(AM6_VTM_OPPVID_VD(idx));
|
|
|
|
val >>= AM6_VTM_OPP_SHIFT(opp);
|
|
val &= AM6_VTM_OPP_MASK;
|
|
|
|
if (!val)
|
|
return 0;
|
|
|
|
if (val > 171)
|
|
return 1660000 + 20000 * (val - 171);
|
|
|
|
if (val > 115)
|
|
return 1100000 + 10000 * (val - 115);
|
|
|
|
if (val > 15)
|
|
return 600000 + 5000 * (val - 15);
|
|
|
|
return 300000 + 20000 * val;
|
|
}
|
|
|
|
static int k3_avs_program_voltage(struct k3_avs_privdata *priv,
|
|
struct vd_data *vd,
|
|
int opp_id)
|
|
{
|
|
u32 volt = vd->opps[opp_id].volt;
|
|
struct vd_data *vd2;
|
|
|
|
if (!vd->supply)
|
|
return -ENODEV;
|
|
|
|
vd->opp = opp_id;
|
|
vd->flags |= VD_FLAG_INIT_DONE;
|
|
|
|
/* Take care of ganged rails and pick the Max amongst them*/
|
|
for (vd2 = priv->vd_config->vds; vd2->id >= 0; vd2++) {
|
|
if (vd == vd2)
|
|
continue;
|
|
|
|
if (vd2->supply != vd->supply)
|
|
continue;
|
|
|
|
if (vd2->opps[vd2->opp].volt > volt)
|
|
volt = vd2->opps[vd2->opp].volt;
|
|
|
|
vd2->flags |= VD_FLAG_INIT_DONE;
|
|
}
|
|
|
|
return regulator_set_value(vd->supply, volt);
|
|
}
|
|
|
|
static struct vd_data *get_vd(struct k3_avs_privdata *priv, int idx)
|
|
{
|
|
struct vd_data *vd;
|
|
|
|
for (vd = priv->vd_config->vds; vd->id >= 0 && vd->id != idx; vd++)
|
|
;
|
|
|
|
if (vd->id < 0)
|
|
return NULL;
|
|
|
|
return vd;
|
|
}
|
|
|
|
/**
|
|
* k3_avs_set_opp: Sets the voltage for an arbitrary VD rail
|
|
* @dev: AVS device
|
|
* @vdd_id: voltage domain ID
|
|
* @opp_id: OPP ID
|
|
*
|
|
* Programs the desired OPP value for the defined voltage rail. This
|
|
* should be called from board files if reconfiguration is desired.
|
|
* Returns 0 on success, negative error value on failure.
|
|
*/
|
|
int k3_avs_set_opp(struct udevice *dev, int vdd_id, int opp_id)
|
|
{
|
|
struct k3_avs_privdata *priv = dev_get_priv(dev);
|
|
struct vd_data *vd;
|
|
|
|
vd = get_vd(priv, vdd_id);
|
|
if (!vd)
|
|
return -EINVAL;
|
|
|
|
return k3_avs_program_voltage(priv, vd, opp_id);
|
|
}
|
|
|
|
static int match_opp(struct vd_data *vd, u32 freq)
|
|
{
|
|
struct opp *opp;
|
|
int opp_id;
|
|
|
|
for (opp_id = 0; opp_id < NUM_OPPS; opp_id++) {
|
|
opp = &vd->opps[opp_id];
|
|
if (opp->freq == freq)
|
|
return opp_id;
|
|
}
|
|
|
|
printf("No matching OPP found for freq %d.\n", freq);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* k3_avs_notify_freq: Notify clock rate change towards AVS subsystem
|
|
* @dev_id: Device ID for the clock to be changed
|
|
* @clk_id: Clock ID for the clock to be changed
|
|
* @freq: New frequency for clock
|
|
*
|
|
* Checks if the provided clock is the MPU clock or not, if not, return
|
|
* immediately. If MPU clock is provided, maps the provided MPU frequency
|
|
* towards an MPU OPP, and programs the voltage to the regulator. Return 0
|
|
* on success, negative error value on failure.
|
|
*/
|
|
int k3_avs_notify_freq(int dev_id, int clk_id, u32 freq)
|
|
{
|
|
int opp_id;
|
|
struct k3_avs_privdata *priv = k3_avs_priv;
|
|
struct vd_data *vd;
|
|
|
|
for (vd = priv->vd_config->vds; vd->id >= 0; vd++) {
|
|
if (vd->dev_id != dev_id || vd->clk_id != clk_id)
|
|
continue;
|
|
|
|
opp_id = match_opp(vd, freq);
|
|
if (opp_id < 0)
|
|
return opp_id;
|
|
|
|
vd->opp = opp_id;
|
|
return k3_avs_program_voltage(priv, vd, opp_id);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int k3_avs_configure(struct udevice *dev, struct k3_avs_privdata *priv)
|
|
{
|
|
struct vd_config *conf;
|
|
int ret;
|
|
char pname[20];
|
|
struct vd_data *vd;
|
|
|
|
conf = (void *)dev_get_driver_data(dev);
|
|
|
|
priv->vd_config = conf;
|
|
|
|
for (vd = conf->vds; vd->id >= 0; vd++) {
|
|
sprintf(pname, "vdd-supply-%d", vd->id);
|
|
ret = device_get_supply_regulator(dev, pname, &vd->supply);
|
|
if (ret)
|
|
dev_warn(dev, "supply not found for VD%d.\n", vd->id);
|
|
|
|
sprintf(pname, "ti,default-opp-%d", vd->id);
|
|
ret = dev_read_u32_default(dev, pname, -1);
|
|
if (ret != -1)
|
|
vd->opp = ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* k3_avs_probe: parses VD info from VTM, and re-configures the OPP data
|
|
*
|
|
* Parses all VDs on a device calculating the AVS class-0 voltages for them,
|
|
* and updates the vd_data based on this. The vd_data itself shall be used
|
|
* to program the required OPPs later on. Returns 0 on success, negative
|
|
* error value on failure.
|
|
*/
|
|
static int k3_avs_probe(struct udevice *dev)
|
|
{
|
|
int opp_id;
|
|
u32 volt;
|
|
struct opp *opp;
|
|
struct k3_avs_privdata *priv;
|
|
struct vd_data *vd;
|
|
int ret;
|
|
|
|
priv = dev_get_priv(dev);
|
|
|
|
k3_avs_priv = priv;
|
|
|
|
ret = k3_avs_configure(dev, priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->base = dev_read_addr_ptr(dev);
|
|
if (!priv->base)
|
|
return -ENODEV;
|
|
|
|
for (vd = priv->vd_config->vds; vd->id >= 0; vd++) {
|
|
if (!(readl(AM6_VTM_DEVINFO(vd->id)) &
|
|
AM6_VTM_AVS0_SUPPORTED)) {
|
|
dev_warn(dev, "AVS-class 0 not supported for VD%d\n",
|
|
vd->id);
|
|
continue;
|
|
}
|
|
|
|
for (opp_id = 0; opp_id < NUM_OPPS; opp_id++) {
|
|
opp = &vd->opps[opp_id];
|
|
|
|
if (!opp->freq)
|
|
continue;
|
|
|
|
volt = priv->vd_config->efuse_xlate(priv, vd->id,
|
|
opp_id);
|
|
if (volt)
|
|
opp->volt = volt;
|
|
}
|
|
}
|
|
|
|
for (vd = priv->vd_config->vds; vd->id >= 0; vd++) {
|
|
if (vd->flags & VD_FLAG_INIT_DONE)
|
|
continue;
|
|
|
|
k3_avs_program_voltage(priv, vd, vd->opp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct vd_data am654_vd_data[] = {
|
|
{
|
|
.id = AM6_VDD_CORE,
|
|
.dev_id = 82, /* AM6_DEV_CBASS0 */
|
|
.clk_id = 0, /* main sysclk0 */
|
|
.opp = AM6_OPP_NOM,
|
|
.opps = {
|
|
[AM6_OPP_NOM] = {
|
|
.volt = 1000000,
|
|
.freq = 250000000, /* CBASS0 */
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.id = AM6_VDD_MPU0,
|
|
.dev_id = 202, /* AM6_DEV_COMPUTE_CLUSTER_A53_0 */
|
|
.clk_id = 0, /* ARM clock */
|
|
.opp = AM6_OPP_NOM,
|
|
.opps = {
|
|
[AM6_OPP_NOM] = {
|
|
.volt = 1000000,
|
|
.freq = 800000000,
|
|
},
|
|
[AM6_OPP_OD] = {
|
|
.volt = 1100000,
|
|
.freq = 1000000000,
|
|
},
|
|
[AM6_OPP_TURBO] = {
|
|
.volt = 1220000,
|
|
.freq = 1100000000,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.id = AM6_VDD_MPU1,
|
|
.opp = AM6_OPP_NOM,
|
|
.dev_id = 204, /* AM6_DEV_COMPUTE_CLUSTER_A53_2 */
|
|
.clk_id = 0, /* ARM clock */
|
|
.opps = {
|
|
[AM6_OPP_NOM] = {
|
|
.volt = 1000000,
|
|
.freq = 800000000,
|
|
},
|
|
[AM6_OPP_OD] = {
|
|
.volt = 1100000,
|
|
.freq = 1000000000,
|
|
},
|
|
[AM6_OPP_TURBO] = {
|
|
.volt = 1220000,
|
|
.freq = 1100000000,
|
|
},
|
|
},
|
|
},
|
|
{ .id = -1 },
|
|
};
|
|
|
|
static struct vd_data j721e_vd_data[] = {
|
|
{
|
|
.id = J721E_VDD_MPU,
|
|
.opp = AM6_OPP_NOM,
|
|
.dev_id = 202, /* J721E_DEV_A72SS0_CORE0 */
|
|
.clk_id = 2, /* ARM clock */
|
|
.opps = {
|
|
[AM6_OPP_NOM] = {
|
|
.volt = 880000, /* TBD in DM */
|
|
.freq = 2000000000,
|
|
},
|
|
},
|
|
},
|
|
{ .id = -1 },
|
|
};
|
|
|
|
static struct vd_config j721e_vd_config = {
|
|
.efuse_xlate = am6_efuse_xlate,
|
|
.vds = j721e_vd_data,
|
|
};
|
|
|
|
static struct vd_config am654_vd_config = {
|
|
.efuse_xlate = am6_efuse_xlate,
|
|
.vds = am654_vd_data,
|
|
};
|
|
|
|
static const struct udevice_id k3_avs_ids[] = {
|
|
{ .compatible = "ti,am654-avs", .data = (ulong)&am654_vd_config },
|
|
{ .compatible = "ti,j721e-avs", .data = (ulong)&j721e_vd_config },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(k3_avs) = {
|
|
.name = "k3_avs",
|
|
.of_match = k3_avs_ids,
|
|
.id = UCLASS_MISC,
|
|
.probe = k3_avs_probe,
|
|
.priv_auto_alloc_size = sizeof(struct k3_avs_privdata),
|
|
};
|