u-boot/board/ti/j721s2/evm.c
Sinthu Raja 554f8e84b6 board: ti: j721s2: Add board_init and support for selecting DT based on EEPROM
Add the board_init_f API for SPL and run the platform-required SoC
initialization.

Add the functionality for board name-based DTB selection from FIT
within SPL. This will make it easier to utilise one defconfig for
both the EVM and the SK.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-27 12:51:27 -05:00

273 lines
5.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Board specific initialization for J721S2 EVM
*
* Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
* David Huang <d-huang@ti.com>
*
*/
#include <common.h>
#include <env.h>
#include <fdt_support.h>
#include <generic-phy.h>
#include <image.h>
#include <init.h>
#include <log.h>
#include <net.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <spl.h>
#include <asm/arch/sys_proto.h>
#include <dm.h>
#include <dm/uclass-internal.h>
#include <dm/root.h>
#include "../common/board_detect.h"
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
return 0;
}
int dram_init(void)
{
#ifdef CONFIG_PHYS_64BIT
gd->ram_size = 0x100000000;
#else
gd->ram_size = 0x80000000;
#endif
return 0;
}
phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
#ifdef CONFIG_PHYS_64BIT
/* Limit RAM used by U-Boot to the DDR low region */
if (gd->ram_top > 0x100000000)
return 0x100000000;
#endif
return gd->ram_top;
}
int dram_init_banksize(void)
{
/* Bank 0 declares the memory available in the DDR low region */
gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = 0x7fffffff;
gd->ram_size = 0x80000000;
#ifdef CONFIG_PHYS_64BIT
/* Bank 1 declares the memory available in the DDR high region */
gd->bd->bi_dram[1].start = CFG_SYS_SDRAM_BASE1;
gd->bd->bi_dram[1].size = 0x37fffffff;
gd->ram_size = 0x400000000;
#endif
return 0;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, struct bd_info *bd)
{
int ret;
ret = fdt_fixup_msmc_ram(blob, "/bus@100000", "sram@70000000");
if (ret < 0)
ret = fdt_fixup_msmc_ram(blob, "/interconnect@100000",
"sram@70000000");
if (ret)
printf("%s: fixing up msmc ram failed %d\n", __func__, ret);
return ret;
}
#endif
#ifdef CONFIG_TI_I2C_BOARD_DETECT
/*
* Functions specific to EVM and SK designs of J721S2/AM68 family.
*/
#define board_is_j721s2_som() board_ti_k3_is("J721S2X-PM1-SOM")
#define board_is_am68_sk_som() board_ti_k3_is("AM68-SK-SOM")
int do_board_detect(void)
{
int ret;
if (board_ti_was_eeprom_read())
return 0;
ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
CONFIG_EEPROM_CHIP_ADDRESS);
if (ret) {
printf("EEPROM not available at 0x%02x, trying to read at 0x%02x\n",
CONFIG_EEPROM_CHIP_ADDRESS, CONFIG_EEPROM_CHIP_ADDRESS + 1);
ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
CONFIG_EEPROM_CHIP_ADDRESS + 1);
if (ret)
pr_err("Reading on-board EEPROM at 0x%02x failed %d\n",
CONFIG_EEPROM_CHIP_ADDRESS + 1, ret);
}
return ret;
}
int checkboard(void)
{
struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
if (do_board_detect())
/* EEPROM not populated */
printf("Board: %s rev %s\n", "J721S2X-PM1-SOM", "E1");
else
printf("Board: %s rev %s\n", ep->name, ep->version);
return 0;
}
static void setup_board_eeprom_env(void)
{
char *name = "j721s2";
if (do_board_detect())
goto invalid_eeprom;
if (board_is_j721s2_som())
name = "j721s2";
else if (board_is_am68_sk_som())
name = "am68-sk";
else
printf("Unidentified board claims %s in eeprom header\n",
board_ti_get_name());
invalid_eeprom:
set_board_info_env_am6(name);
}
static void setup_serial(void)
{
struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
unsigned long board_serial;
char *endp;
char serial_string[17] = { 0 };
if (env_get("serial#"))
return;
board_serial = simple_strtoul(ep->serial, &endp, 16);
if (*endp != '\0') {
pr_err("Error: Can't set serial# to %s\n", ep->serial);
return;
}
snprintf(serial_string, sizeof(serial_string), "%016lx", board_serial);
env_set("serial#", serial_string);
}
#endif
/*
* This function chooses the right dtb based on the board name read from
* EEPROM if the EEPROM is programmed. Also, by default the boot chooses
* the EVM DTB if there is no EEPROM is programmed or not detected.
*/
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
bool eeprom_read = board_ti_was_eeprom_read();
if (!eeprom_read || board_is_j721s2_som()) {
if (!strcmp(name, "k3-j721s2-common-proc-board"))
return 0;
} else if (!eeprom_read || board_is_am68_sk_som()) {
if (!strcmp(name, "k3-am68-sk-base-board"))
return 0;
}
return -1;
}
#endif
int board_late_init(void)
{
if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT)) {
setup_board_eeprom_env();
setup_serial();
}
return 0;
}
void spl_board_init(void)
{
}
/* Support for the various EVM / SK families */
#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT)
void do_dt_magic(void)
{
int ret, rescan, mmc_dev = -1;
static struct mmc *mmc;
do_board_detect();
/*
* Board detection has been done.
* Let us see if another dtb wouldn't be a better match
* for our board
*/
if (IS_ENABLED(CONFIG_CPU_V7R)) {
ret = fdtdec_resetup(&rescan);
if (!ret && rescan) {
dm_uninit();
dm_init_and_scan(true);
}
}
/*
* Because of multi DTB configuration, the MMC device has
* to be re-initialized after reconfiguring FDT inorder to
* boot from MMC. Do this when boot mode is MMC and ROM has
* not loaded SYSFW.
*/
switch (spl_boot_device()) {
case BOOT_DEVICE_MMC1:
mmc_dev = 0;
break;
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:
mmc_dev = 1;
break;
}
if (mmc_dev > 0 && !check_rom_loaded_sysfw()) {
ret = mmc_init_device(mmc_dev);
if (!ret) {
mmc = find_mmc_device(mmc_dev);
if (mmc) {
ret = mmc_init(mmc);
if (ret)
printf("mmc init failed with error: %d\n", ret);
}
}
}
}
#endif
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong dummy)
{
k3_spl_init();
#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT)
do_dt_magic();
#endif
k3_mem_init();
}
#endif