u-boot/doc/device-tree-bindings/i2c/i2c.txt
Simon Glass 7132b9fd68 dm: i2c: dts: Support an offset-len device tree property
Since U-Boot can support different offset lengths (0-4 bytes), add a device
tree property to specify this. This avoids hard-coding it in the driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:10:01 -07:00

28 lines
755 B
Text

U-Boot I2C
----------
U-Boot's I2C model has the concept of an offset within a chip (I2C target
device). The offset can be up to 4 bytes long, but is normally 1 byte,
meaning that offsets from 0 to 255 are supported by the chip. This often
corresponds to register numbers.
Apart from the controller-specific I2C bindings, U-Boot supports a special
property which allows the chip offset length to be selected.
Optional properties:
- u-boot,i2c-offset-len - length of chip offset in bytes. If omitted the
default value of 1 is used.
Example
-------
i2c4: i2c@12ca0000 {
cros-ec@1e {
reg = <0x1e>;
compatible = "google,cros-ec";
i2c-max-frequency = <100000>;
u-boot,i2c-offset-len = <0>;
ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
};
};