mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
882b7d726f
The duplication of the do_reset prototype has gotten out of hand, and they're not all in sync. Unify them all in command.h. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
911 lines
23 KiB
C
911 lines
23 KiB
C
/*
|
|
* (C) Copyright 2001-2004
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* (C) Copyright 2005
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* (C) Copyright 2006-2007
|
|
* Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
#include <pci.h>
|
|
#include <sm501.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* FPGA internal regs */
|
|
#define FPGA_CTRL ((u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + 0x000))
|
|
#define FPGA_STATUS ((u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + 0x002))
|
|
#define FPGA_CTR ((u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + 0x004))
|
|
#define FPGA_BL ((u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + 0x006))
|
|
|
|
/* FPGA Control Reg */
|
|
#define FPGA_CTRL_REV0 0x0001
|
|
#define FPGA_CTRL_REV1 0x0002
|
|
#define FPGA_CTRL_VGA0_BL 0x0004
|
|
#define FPGA_CTRL_VGA0_BL_MODE 0x0008
|
|
#define FPGA_CTRL_CF_RESET 0x0040
|
|
#define FPGA_CTRL_PS2_PWR 0x0080
|
|
#define FPGA_CTRL_CF_PWRN 0x0100 /* low active */
|
|
#define FPGA_CTRL_CF_BUS_EN 0x0200
|
|
#define FPGA_CTRL_LCD_CLK 0x7000 /* mask for lcd clock */
|
|
#define FPGA_CTRL_OW_ENABLE 0x8000
|
|
|
|
#define FPGA_STATUS_CF_DETECT 0x8000
|
|
|
|
#ifdef CONFIG_VIDEO_SM501
|
|
|
|
#define SWAP32(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\
|
|
(((x) & 0x00ff0000) >> 8) | (((x) & 0xff000000) >> 24) )
|
|
|
|
#ifdef CONFIG_VIDEO_SM501_8BPP
|
|
#error CONFIG_VIDEO_SM501_8BPP not supported.
|
|
#endif /* CONFIG_VIDEO_SM501_8BPP */
|
|
|
|
#ifdef CONFIG_VIDEO_SM501_16BPP
|
|
#define BPP 16
|
|
|
|
/*
|
|
* 800x600 display B084SN03: PCLK = 40MHz
|
|
* => 2*PCLK = 80MHz
|
|
* 336/4 = 84MHz
|
|
* => PCLK = 84MHz
|
|
*/
|
|
static const SMI_REGS init_regs_800x600 [] =
|
|
{
|
|
#if 1 /* test-only */
|
|
{0x0005c, SWAP32(0xffffffff)}, /* set endianess to big endian */
|
|
#else
|
|
{0x0005c, SWAP32(0x00000000)}, /* set endianess to little endian */
|
|
#endif
|
|
{0x00004, SWAP32(0x00000000)},
|
|
/* clocks for pm1... */
|
|
{0x00048, SWAP32(0x00021807)},
|
|
{0x0004C, SWAP32(0x221a0a01)},
|
|
{0x00054, SWAP32(0x00000001)},
|
|
/* clocks for pm0... */
|
|
{0x00040, SWAP32(0x00021807)},
|
|
{0x00044, SWAP32(0x221a0a01)},
|
|
{0x00054, SWAP32(0x00000000)},
|
|
/* GPIO */
|
|
{0x1000c, SWAP32(0xfffffff0)}, /* GPIO32..63 direction */
|
|
/* panel control regs... */
|
|
{0x80000, SWAP32(0x0f013105)}, /* panel display control: 16-bit RGB 5:6:5 mode */
|
|
{0x80004, SWAP32(0xc428bb17)}, /* panel panning control ??? */
|
|
{0x8000C, SWAP32(0x00010000)}, /* panel fb address */
|
|
{0x80010, SWAP32(0x06400640)}, /* panel fb offset/window width */
|
|
{0x80014, SWAP32(0x03200000)}, /* panel fb width (0x320=800) */
|
|
{0x80018, SWAP32(0x02580000)}, /* panel fb height (0x258=600) */
|
|
{0x8001C, SWAP32(0x00000000)}, /* panel plane tl location */
|
|
{0x80020, SWAP32(0x02580320)}, /* panel plane br location */
|
|
{0x80024, SWAP32(0x041f031f)}, /* panel horizontal total */
|
|
{0x80028, SWAP32(0x00800347)}, /* panel horizontal sync */
|
|
{0x8002C, SWAP32(0x02730257)}, /* panel vertical total */
|
|
{0x80030, SWAP32(0x00040258)}, /* panel vertical sync */
|
|
{0x80200, SWAP32(0x00010000)}, /* crt display control */
|
|
{0, 0}
|
|
};
|
|
|
|
/*
|
|
* 1024x768 display G150XG02: PCLK = 65MHz
|
|
* => 2*PCLK = 130MHz
|
|
* 288/2 = 144MHz
|
|
* => PCLK = 72MHz
|
|
*/
|
|
static const SMI_REGS init_regs_1024x768 [] =
|
|
{
|
|
{0x00004, SWAP32(0x00000000)},
|
|
/* clocks for pm1... */
|
|
{0x00048, SWAP32(0x00021807)},
|
|
{0x0004C, SWAP32(0x011a0a01)},
|
|
{0x00054, SWAP32(0x00000001)},
|
|
/* clocks for pm0... */
|
|
{0x00040, SWAP32(0x00021807)},
|
|
{0x00044, SWAP32(0x011a0a01)},
|
|
{0x00054, SWAP32(0x00000000)},
|
|
/* GPIO */
|
|
{0x1000c, SWAP32(0xfffffff0)}, /* GPIO32..63 direction */
|
|
/* panel control regs... */
|
|
{0x80000, SWAP32(0x0f013105)}, /* panel display control: 16-bit RGB 5:6:5 mode */
|
|
{0x80004, SWAP32(0xc428bb17)}, /* panel panning control ??? */
|
|
{0x8000C, SWAP32(0x00010000)}, /* panel fb address */
|
|
{0x80010, SWAP32(0x08000800)}, /* panel fb offset/window width */
|
|
{0x80014, SWAP32(0x04000000)}, /* panel fb width (0x400=1024) */
|
|
{0x80018, SWAP32(0x03000000)}, /* panel fb height (0x300=768) */
|
|
{0x8001C, SWAP32(0x00000000)}, /* panel plane tl location */
|
|
{0x80020, SWAP32(0x03000400)}, /* panel plane br location */
|
|
{0x80024, SWAP32(0x053f03ff)}, /* panel horizontal total */
|
|
{0x80028, SWAP32(0x0140040f)}, /* panel horizontal sync */
|
|
{0x8002C, SWAP32(0x032502ff)}, /* panel vertical total */
|
|
{0x80030, SWAP32(0x00260301)}, /* panel vertical sync */
|
|
{0x80200, SWAP32(0x00010000)}, /* crt display control */
|
|
{0, 0}
|
|
};
|
|
|
|
#endif /* CONFIG_VIDEO_SM501_16BPP */
|
|
|
|
#ifdef CONFIG_VIDEO_SM501_32BPP
|
|
#define BPP 32
|
|
|
|
/*
|
|
* 800x600 display B084SN03: PCLK = 40MHz
|
|
* => 2*PCLK = 80MHz
|
|
* 336/4 = 84MHz
|
|
* => PCLK = 84MHz
|
|
*/
|
|
static const SMI_REGS init_regs_800x600 [] =
|
|
{
|
|
#if 0 /* test-only */
|
|
{0x0005c, SWAP32(0xffffffff)}, /* set endianess to big endian */
|
|
#else
|
|
{0x0005c, SWAP32(0x00000000)}, /* set endianess to little endian */
|
|
#endif
|
|
{0x00004, SWAP32(0x00000000)},
|
|
/* clocks for pm1... */
|
|
{0x00048, SWAP32(0x00021807)},
|
|
{0x0004C, SWAP32(0x221a0a01)},
|
|
{0x00054, SWAP32(0x00000001)},
|
|
/* clocks for pm0... */
|
|
{0x00040, SWAP32(0x00021807)},
|
|
{0x00044, SWAP32(0x221a0a01)},
|
|
{0x00054, SWAP32(0x00000000)},
|
|
/* GPIO */
|
|
{0x1000c, SWAP32(0xfffffff0)}, /* GPIO32..63 direction */
|
|
/* panel control regs... */
|
|
{0x80000, SWAP32(0x0f013106)}, /* panel display control: 32-bit RGB 8:8:8 mode */
|
|
{0x80004, SWAP32(0xc428bb17)}, /* panel panning control ??? */
|
|
{0x8000C, SWAP32(0x00010000)}, /* panel fb address */
|
|
{0x80010, SWAP32(0x0c800c80)}, /* panel fb offset/window width */
|
|
{0x80014, SWAP32(0x03200000)}, /* panel fb width (0x320=800) */
|
|
{0x80018, SWAP32(0x02580000)}, /* panel fb height (0x258=600) */
|
|
{0x8001C, SWAP32(0x00000000)}, /* panel plane tl location */
|
|
{0x80020, SWAP32(0x02580320)}, /* panel plane br location */
|
|
{0x80024, SWAP32(0x041f031f)}, /* panel horizontal total */
|
|
{0x80028, SWAP32(0x00800347)}, /* panel horizontal sync */
|
|
{0x8002C, SWAP32(0x02730257)}, /* panel vertical total */
|
|
{0x80030, SWAP32(0x00040258)}, /* panel vertical sync */
|
|
{0x80200, SWAP32(0x00010000)}, /* crt display control */
|
|
{0, 0}
|
|
};
|
|
|
|
/*
|
|
* 1024x768 display G150XG02: PCLK = 65MHz
|
|
* => 2*PCLK = 130MHz
|
|
* 288/2 = 144MHz
|
|
* => PCLK = 72MHz
|
|
*/
|
|
static const SMI_REGS init_regs_1024x768 [] =
|
|
{
|
|
{0x00004, SWAP32(0x00000000)},
|
|
/* clocks for pm1... */
|
|
{0x00048, SWAP32(0x00021807)},
|
|
{0x0004C, SWAP32(0x011a0a01)},
|
|
{0x00054, SWAP32(0x00000001)},
|
|
/* clocks for pm0... */
|
|
{0x00040, SWAP32(0x00021807)},
|
|
{0x00044, SWAP32(0x011a0a01)},
|
|
{0x00054, SWAP32(0x00000000)},
|
|
/* GPIO */
|
|
{0x1000c, SWAP32(0xfffffff0)}, /* GPIO32..63 direction */
|
|
/* panel control regs... */
|
|
{0x80000, SWAP32(0x0f013106)}, /* panel display control: 32-bit RGB 8:8:8 mode */
|
|
{0x80004, SWAP32(0xc428bb17)}, /* panel panning control ??? */
|
|
{0x8000C, SWAP32(0x00010000)}, /* panel fb address */
|
|
{0x80010, SWAP32(0x10001000)}, /* panel fb offset/window width */
|
|
{0x80014, SWAP32(0x04000000)}, /* panel fb width (0x400=1024) */
|
|
{0x80018, SWAP32(0x03000000)}, /* panel fb height (0x300=768) */
|
|
{0x8001C, SWAP32(0x00000000)}, /* panel plane tl location */
|
|
{0x80020, SWAP32(0x03000400)}, /* panel plane br location */
|
|
{0x80024, SWAP32(0x053f03ff)}, /* panel horizontal total */
|
|
{0x80028, SWAP32(0x0140040f)}, /* panel horizontal sync */
|
|
{0x8002C, SWAP32(0x032502ff)}, /* panel vertical total */
|
|
{0x80030, SWAP32(0x00260301)}, /* panel vertical sync */
|
|
{0x80200, SWAP32(0x00010000)}, /* crt display control */
|
|
{0, 0}
|
|
};
|
|
|
|
#endif /* CONFIG_VIDEO_SM501_32BPP */
|
|
|
|
#endif /* CONFIG_VIDEO_SM501 */
|
|
|
|
#if 0
|
|
#define FPGA_DEBUG
|
|
#endif
|
|
|
|
extern void lxt971_no_sleep(void);
|
|
|
|
/* fpga configuration data - gzip compressed and generated by bin2c */
|
|
const unsigned char fpgadata[] =
|
|
{
|
|
#include "fpgadata.c"
|
|
};
|
|
|
|
/*
|
|
* include common fpga code (for esd boards)
|
|
*/
|
|
#include "../common/fpga.c"
|
|
|
|
|
|
/* logo bitmap data - gzip compressed and generated by bin2c */
|
|
unsigned char logo_bmp_320[] =
|
|
{
|
|
#include "logo_320_240_4bpp.c"
|
|
};
|
|
|
|
unsigned char logo_bmp_320_8bpp[] =
|
|
{
|
|
#include "logo_320_240_8bpp.c"
|
|
};
|
|
|
|
unsigned char logo_bmp_640[] =
|
|
{
|
|
#include "logo_640_480_24bpp.c"
|
|
};
|
|
|
|
unsigned char logo_bmp_1024[] =
|
|
{
|
|
#include "logo_1024_768_8bpp.c"
|
|
};
|
|
|
|
|
|
/*
|
|
* include common lcd code (for esd boards)
|
|
*/
|
|
#include "../common/lcd.c"
|
|
|
|
#include "../common/s1d13704_320_240_4bpp.h"
|
|
#include "../common/s1d13705_320_240_8bpp.h"
|
|
#include "../common/s1d13806_640_480_16bpp.h"
|
|
#include "../common/s1d13806_1024_768_8bpp.h"
|
|
|
|
|
|
/*
|
|
* include common auto-update code (for esd boards)
|
|
*/
|
|
#include "../common/auto_update.h"
|
|
|
|
au_image_t au_image[] = {
|
|
{"hh405/preinst.img", 0, -1, AU_SCRIPT},
|
|
{"hh405/u-boot.img", 0xfff80000, 0x00080000, AU_FIRMWARE},
|
|
{"hh405/pImage_${bd_type}", 0x00000000, 0x00100000, AU_NAND},
|
|
{"hh405/pImage.initrd", 0x00100000, 0x00200000, AU_NAND},
|
|
{"hh405/yaffsmt2.img", 0x00300000, 0x01c00000, AU_NAND},
|
|
{"hh405/postinst.img", 0, 0, AU_SCRIPT},
|
|
};
|
|
|
|
int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
|
|
|
|
|
|
/*
|
|
* Get version of HH405 board from GPIO's
|
|
*/
|
|
int board_revision(void)
|
|
{
|
|
unsigned long osrh_reg;
|
|
unsigned long isr1h_reg;
|
|
unsigned long tcr_reg;
|
|
unsigned long value;
|
|
|
|
/*
|
|
* Setup GPIO pins (BLAST/GPIO0 and GPIO9 as GPIO)
|
|
*/
|
|
osrh_reg = in_be32((void *)GPIO0_OSRH);
|
|
isr1h_reg = in_be32((void *)GPIO0_ISR1H);
|
|
tcr_reg = in_be32((void *)GPIO0_TCR);
|
|
out_be32((void *)GPIO0_OSRH, osrh_reg & ~0xC0003000); /* output select */
|
|
out_be32((void *)GPIO0_ISR1H, isr1h_reg | 0xC0003000); /* input select */
|
|
out_be32((void *)GPIO0_TCR, tcr_reg & ~0x80400000); /* select input */
|
|
|
|
udelay(1000); /* wait some time before reading input */
|
|
value = in_be32((void *)GPIO0_IR) & 0x80400000; /* get config bits */
|
|
|
|
/*
|
|
* Restore GPIO settings
|
|
*/
|
|
out_be32((void *)GPIO0_OSRH, osrh_reg); /* output select */
|
|
out_be32((void *)GPIO0_ISR1H, isr1h_reg); /* input select */
|
|
out_be32((void *)GPIO0_TCR, tcr_reg); /* enable output driver for outputs */
|
|
|
|
if (value & 0x80000000) {
|
|
/* Revision 1.0 or 1.1 detected */
|
|
return 1;
|
|
} else {
|
|
if (value & 0x00400000) {
|
|
/* unused */
|
|
return 3;
|
|
} else {
|
|
return 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*
|
|
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
* IRQ 17-24 RESERVED
|
|
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
|
|
*/
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
|
|
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
|
|
mtdcr(UIC0PR, CONFIG_SYS_UIC0_POLARITY);/* set int polarities */
|
|
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
|
|
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
/*
|
|
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
|
|
*/
|
|
mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int cf_enable(void)
|
|
{
|
|
int i;
|
|
|
|
if (gd->board_type >= 2) {
|
|
if (in_be16(FPGA_STATUS) & FPGA_STATUS_CF_DETECT) {
|
|
if (!(in_be16(FPGA_CTRL) & FPGA_CTRL_CF_BUS_EN)) {
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) & ~FPGA_CTRL_CF_PWRN);
|
|
|
|
for (i=0; i<300; i++)
|
|
udelay(1000);
|
|
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) | FPGA_CTRL_CF_BUS_EN);
|
|
|
|
for (i=0; i<20; i++)
|
|
udelay(1000);
|
|
}
|
|
} else {
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) & ~FPGA_CTRL_CF_BUS_EN);
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) | FPGA_CTRL_CF_PWRN);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
unsigned char *dst;
|
|
ulong len = sizeof(fpgadata);
|
|
int status;
|
|
int index;
|
|
int i;
|
|
char *str;
|
|
unsigned long contrast0 = 0xffffffff;
|
|
|
|
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
|
|
if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
|
|
printf ("GUNZIP ERROR - must RESET board to recover\n");
|
|
do_reset (NULL, 0, 0, NULL);
|
|
}
|
|
|
|
status = fpga_boot(dst, len);
|
|
if (status != 0) {
|
|
printf("\nFPGA: Booting failed ");
|
|
switch (status) {
|
|
case ERROR_FPGA_PRG_INIT_LOW:
|
|
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_INIT_HIGH:
|
|
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_DONE:
|
|
printf("(Timeout: DONE not high after programming FPGA)\n ");
|
|
break;
|
|
}
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("FPGA: %s\n", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc ('\n');
|
|
/* delayed reboot */
|
|
for (i=20; i>0; i--) {
|
|
printf("Rebooting in %2d seconds \r",i);
|
|
for (index=0;index<1000;index++)
|
|
udelay(1000);
|
|
}
|
|
putc ('\n');
|
|
do_reset(NULL, 0, 0, NULL);
|
|
}
|
|
|
|
puts("FPGA: ");
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("%s ", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc ('\n');
|
|
|
|
free(dst);
|
|
|
|
/*
|
|
* Reset FPGA via FPGA_INIT pin
|
|
*/
|
|
/* setup FPGA_INIT as output */
|
|
out_be32((void *)GPIO0_TCR,
|
|
in_be32((void *)GPIO0_TCR) | FPGA_INIT);
|
|
out_be32((void *)GPIO0_OR,
|
|
in_be32((void *)GPIO0_OR) & ~FPGA_INIT); /* reset low */
|
|
udelay(1000); /* wait 1ms */
|
|
out_be32((void *)GPIO0_OR,
|
|
in_be32((void *)GPIO0_OR) | FPGA_INIT); /* reset high */
|
|
udelay(1000); /* wait 1ms */
|
|
|
|
/*
|
|
* Write Board revision into FPGA
|
|
*/
|
|
out_be16(FPGA_CTRL, in_be16(FPGA_CTRL) | (gd->board_type & 0x0003));
|
|
|
|
/*
|
|
* Setup and enable EEPROM write protection
|
|
*/
|
|
out_be32((void *)GPIO0_OR,
|
|
in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
|
|
|
|
/*
|
|
* Reset touch-screen controller
|
|
*/
|
|
out_be32((void *)GPIO0_OR,
|
|
in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_TOUCH_RST);
|
|
udelay(1000);
|
|
out_be32((void *)GPIO0_OR,
|
|
in_be32((void *)GPIO0_OR) | CONFIG_SYS_TOUCH_RST);
|
|
|
|
/*
|
|
* Enable power on PS/2 interface (with reset)
|
|
*/
|
|
out_be16(FPGA_CTRL, in_be16(FPGA_CTRL) & ~FPGA_CTRL_PS2_PWR);
|
|
for (i=0;i<500;i++)
|
|
udelay(1000);
|
|
out_be16(FPGA_CTRL, in_be16(FPGA_CTRL) | FPGA_CTRL_PS2_PWR);
|
|
|
|
/*
|
|
* Get contrast value from environment variable
|
|
*/
|
|
str = getenv("contrast0");
|
|
if (str) {
|
|
contrast0 = simple_strtol(str, NULL, 16);
|
|
if (contrast0 > 255) {
|
|
printf("ERROR: contrast0 value too high (0x%lx)!\n",
|
|
contrast0);
|
|
contrast0 = 0xffffffff;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Init lcd interface and display logo
|
|
*/
|
|
|
|
str = getenv("bd_type");
|
|
if (strcmp(str, "ppc230") == 0) {
|
|
/*
|
|
* Switch backlight on
|
|
*/
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) | FPGA_CTRL_VGA0_BL);
|
|
out_be16(FPGA_BL, 0x0000);
|
|
|
|
lcd_setup(1, 0);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
|
|
regs_13806_1024_768_8bpp,
|
|
sizeof(regs_13806_1024_768_8bpp)/sizeof(regs_13806_1024_768_8bpp[0]),
|
|
logo_bmp_1024, sizeof(logo_bmp_1024));
|
|
} else if (strcmp(str, "ppc220") == 0) {
|
|
/*
|
|
* Switch backlight on
|
|
*/
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) & ~FPGA_CTRL_VGA0_BL);
|
|
out_be16(FPGA_BL, 0x0000);
|
|
|
|
lcd_setup(1, 0);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
|
|
regs_13806_640_480_16bpp,
|
|
sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
|
|
logo_bmp_640, sizeof(logo_bmp_640));
|
|
} else if (strcmp(str, "ppc215") == 0) {
|
|
/*
|
|
* Set default display contrast voltage
|
|
*/
|
|
if (contrast0 == 0xffffffff) {
|
|
out_be16(FPGA_CTR, 0x0082);
|
|
} else {
|
|
out_be16(FPGA_CTR, contrast0);
|
|
}
|
|
out_be16(FPGA_BL, 0xffff);
|
|
/*
|
|
* Switch backlight on
|
|
*/
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) |
|
|
FPGA_CTRL_VGA0_BL |
|
|
FPGA_CTRL_VGA0_BL_MODE);
|
|
/*
|
|
* Set lcd clock (small epson)
|
|
*/
|
|
out_be16(FPGA_CTRL, in_be16(FPGA_CTRL) | LCD_CLK_06250);
|
|
udelay(100); /* wait for 100 us */
|
|
|
|
lcd_setup(0, 1);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
|
|
regs_13705_320_240_8bpp,
|
|
sizeof(regs_13705_320_240_8bpp)/sizeof(regs_13705_320_240_8bpp[0]),
|
|
logo_bmp_320_8bpp, sizeof(logo_bmp_320_8bpp));
|
|
} else if (strcmp(str, "ppc210") == 0) {
|
|
/*
|
|
* Set default display contrast voltage
|
|
*/
|
|
if (contrast0 == 0xffffffff) {
|
|
out_be16(FPGA_CTR, 0x0060);
|
|
} else {
|
|
out_be16(FPGA_CTR, contrast0);
|
|
}
|
|
out_be16(FPGA_BL, 0xffff);
|
|
/*
|
|
* Switch backlight on
|
|
*/
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) |
|
|
FPGA_CTRL_VGA0_BL |
|
|
FPGA_CTRL_VGA0_BL_MODE);
|
|
/*
|
|
* Set lcd clock (small epson), enable 1-wire interface
|
|
*/
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) |
|
|
LCD_CLK_08330 |
|
|
FPGA_CTRL_OW_ENABLE);
|
|
|
|
lcd_setup(0, 1);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
|
|
regs_13704_320_240_4bpp,
|
|
sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
|
|
logo_bmp_320, sizeof(logo_bmp_320));
|
|
#ifdef CONFIG_VIDEO_SM501
|
|
} else {
|
|
pci_dev_t devbusfn;
|
|
|
|
/*
|
|
* Is SM501 connected (ppc221/ppc231)?
|
|
*/
|
|
devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
|
|
if (devbusfn != -1) {
|
|
puts("VGA: SM501 with 8 MB ");
|
|
if (strcmp(str, "ppc221") == 0) {
|
|
printf("(800*600, %dbpp)\n", BPP);
|
|
out_be16(FPGA_BL, 0x002d); /* max. allowed brightness */
|
|
} else if (strcmp(str, "ppc231") == 0) {
|
|
printf("(1024*768, %dbpp)\n", BPP);
|
|
out_be16(FPGA_BL, 0x0000);
|
|
} else {
|
|
printf("Unsupported bd_type defined (%s) -> No display configured!\n", str);
|
|
return 0;
|
|
}
|
|
} else {
|
|
printf("Unsupported bd_type defined (%s) -> No display configured!\n", str);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_VIDEO_SM501 */
|
|
}
|
|
|
|
cf_enable();
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
char str[64];
|
|
int i = getenv_f("serial#", str, sizeof(str));
|
|
|
|
puts ("Board: ");
|
|
|
|
if (i == -1) {
|
|
puts ("### No HW ID - assuming HH405");
|
|
} else {
|
|
puts(str);
|
|
}
|
|
|
|
if (getenv_f("bd_type", str, sizeof(str)) != -1) {
|
|
printf(" (%s", str);
|
|
} else {
|
|
puts(" (Missing bd_type!");
|
|
}
|
|
|
|
gd->board_type = board_revision();
|
|
printf(", Rev %ld.x)\n", gd->board_type);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_RESET
|
|
void ide_set_reset(int on)
|
|
{
|
|
if (((gd->board_type >= 2) &&
|
|
(in_be16(FPGA_STATUS) & FPGA_STATUS_CF_DETECT)) ||
|
|
(gd->board_type < 2)) {
|
|
/*
|
|
* Assert or deassert CompactFlash Reset Pin
|
|
*/
|
|
if (on) { /* assert RESET */
|
|
cf_enable();
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) &
|
|
~FPGA_CTRL_CF_RESET);
|
|
} else { /* release RESET */
|
|
out_be16(FPGA_CTRL,
|
|
in_be16(FPGA_CTRL) |
|
|
FPGA_CTRL_CF_RESET);
|
|
}
|
|
}
|
|
}
|
|
#endif /* CONFIG_IDE_RESET */
|
|
|
|
|
|
#if defined(CONFIG_SYS_EEPROM_WREN)
|
|
/* Input: <dev_addr> I2C address of EEPROM device to enable.
|
|
* <state> -1: deliver current state
|
|
* 0: disable write
|
|
* 1: enable write
|
|
* Returns: -1: wrong device address
|
|
* 0: dis-/en- able done
|
|
* 0/1: current state if <state> was -1.
|
|
*/
|
|
int eeprom_write_enable (unsigned dev_addr, int state)
|
|
{
|
|
if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
|
|
return -1;
|
|
} else {
|
|
switch (state) {
|
|
case 1:
|
|
/* Enable write access, clear bit GPIO_SINT2. */
|
|
out_be32((void *)GPIO0_OR,
|
|
in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
|
|
state = 0;
|
|
break;
|
|
case 0:
|
|
/* Disable write access, set bit GPIO_SINT2. */
|
|
out_be32((void *)GPIO0_OR,
|
|
in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
|
|
state = 0;
|
|
break;
|
|
default:
|
|
/* Read current status back. */
|
|
state = (0 == (in_be32((void *)GPIO0_OR) &
|
|
CONFIG_SYS_EEPROM_WP));
|
|
break;
|
|
}
|
|
}
|
|
return state;
|
|
}
|
|
|
|
int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int query = argc == 1;
|
|
int state = 0;
|
|
|
|
if (query) {
|
|
/* Query write access state. */
|
|
state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
|
|
if (state < 0) {
|
|
puts ("Query of write access state failed.\n");
|
|
} else {
|
|
printf ("Write access for device 0x%0x is %sabled.\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
|
|
state = 0;
|
|
}
|
|
} else {
|
|
if ('0' == argv[1][0]) {
|
|
/* Disable write access. */
|
|
state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
|
|
} else {
|
|
/* Enable write access. */
|
|
state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
|
|
}
|
|
if (state < 0) {
|
|
puts ("Setup of write access state failed.\n");
|
|
}
|
|
}
|
|
|
|
return state;
|
|
}
|
|
|
|
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
|
|
"Enable / disable / query EEPROM write access",
|
|
""
|
|
);
|
|
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
|
|
|
|
|
|
#ifdef CONFIG_VIDEO_SM501
|
|
#ifdef CONFIG_CONSOLE_EXTRA_INFO
|
|
/*
|
|
* Return text to be printed besides the logo.
|
|
*/
|
|
void video_get_info_str (int line_number, char *info)
|
|
{
|
|
char str[64];
|
|
char str2[64];
|
|
int i = getenv_f("serial#", str2, sizeof(str));
|
|
|
|
if (line_number == 1) {
|
|
sprintf(str, " Board: ");
|
|
|
|
if (i == -1) {
|
|
strcat(str, "### No HW ID - assuming HH405");
|
|
} else {
|
|
strcat(str, str2);
|
|
}
|
|
|
|
if (getenv_f("bd_type", str2, sizeof(str2)) != -1) {
|
|
strcat(str, " (");
|
|
strcat(str, str2);
|
|
} else {
|
|
strcat(str, " (Missing bd_type!");
|
|
}
|
|
|
|
sprintf(str2, ", Rev %ld.x)", gd->board_type);
|
|
strcat(str, str2);
|
|
strcpy(info, str);
|
|
} else {
|
|
info [0] = '\0';
|
|
}
|
|
}
|
|
#endif /* CONFIG_CONSOLE_EXTRA_INFO */
|
|
|
|
/*
|
|
* Returns SM501 register base address. First thing called in the driver.
|
|
*/
|
|
unsigned int board_video_init (void)
|
|
{
|
|
pci_dev_t devbusfn;
|
|
u32 addr;
|
|
|
|
/*
|
|
* Is SM501 connected (ppc221/ppc231)?
|
|
*/
|
|
devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
|
|
if (devbusfn != -1) {
|
|
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, (u32 *)&addr);
|
|
return (addr & 0xfffffffe);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Returns SM501 framebuffer address
|
|
*/
|
|
unsigned int board_video_get_fb (void)
|
|
{
|
|
pci_dev_t devbusfn;
|
|
u32 addr;
|
|
|
|
/*
|
|
* Is SM501 connected (ppc221/ppc231)?
|
|
*/
|
|
devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
|
|
if (devbusfn != -1) {
|
|
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, (u32 *)&addr);
|
|
addr &= 0xfffffffe;
|
|
#ifdef CONFIG_VIDEO_SM501_FBMEM_OFFSET
|
|
addr += CONFIG_VIDEO_SM501_FBMEM_OFFSET;
|
|
#endif
|
|
return addr;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called after initializing the SM501 and before clearing the screen.
|
|
*/
|
|
void board_validate_screen (unsigned int base)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* Return a pointer to the initialization sequence.
|
|
*/
|
|
const SMI_REGS *board_get_regs (void)
|
|
{
|
|
char *str;
|
|
|
|
str = getenv("bd_type");
|
|
if (strcmp(str, "ppc221") == 0) {
|
|
return init_regs_800x600;
|
|
} else {
|
|
return init_regs_1024x768;
|
|
}
|
|
}
|
|
|
|
int board_get_width (void)
|
|
{
|
|
char *str;
|
|
|
|
str = getenv("bd_type");
|
|
if (strcmp(str, "ppc221") == 0) {
|
|
return 800;
|
|
} else {
|
|
return 1024;
|
|
}
|
|
}
|
|
|
|
int board_get_height (void)
|
|
{
|
|
char *str;
|
|
|
|
str = getenv("bd_type");
|
|
if (strcmp(str, "ppc221") == 0) {
|
|
return 600;
|
|
} else {
|
|
return 768;
|
|
}
|
|
}
|
|
|
|
#endif /* CONFIG_VIDEO_SM501 */
|
|
|
|
|
|
void reset_phy(void)
|
|
{
|
|
#ifdef CONFIG_LXT971_NO_SLEEP
|
|
|
|
/*
|
|
* Disable sleep mode in LXT971
|
|
*/
|
|
lxt971_no_sleep();
|
|
#endif
|
|
}
|