u-boot/include/configs/trats.h
Seung-Woo Kim 767edf0f6b Revert "arm: config: fix default console only to specify the device"
This reverts commit 232ed3ca53.

In exynos boards, ${console} is used to set bootargs but it sets
without "console=", so CONFIG_DEFAULT_CONSOLE for these boards is
designated with "console=" but it is removed. So revert the commit.

References for using ${console} in
   board/samsung/common/bootscripts/autoboot.cmd
   board/samsung/common/bootscripts/bootzimg.cmd

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-12-26 10:34:59 +09:00

195 lines
5.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Samsung Electronics
* Heungjun Kim <riverful.kim@samsung.com>
*
* Configuation settings for the SAMSUNG TRATS (EXYNOS4210) board.
*/
#ifndef __CONFIG_TRATS_H
#define __CONFIG_TRATS_H
#include <configs/exynos4-common.h>
#define CONFIG_TRATS
#define CONFIG_TIZEN /* TIZEN lib */
#define CONFIG_SYS_L2CACHE_OFF
#ifndef CONFIG_SYS_L2CACHE_OFF
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE 0x10502000
#endif
/* TRATS has 4 banks of DRAM */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
/* select serial console configuration */
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
#define CONFIG_BOOTCOMMAND "run autoboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_BOOTBLOCK "10"
#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
#define CONFIG_ENV_SIZE 4096
#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
#define CONFIG_ENV_OVERWRITE
/* Tizen - partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOT "boot"
#define PARTS_QBOOT "qboot"
#define PARTS_CSC "csc"
#define PARTS_ROOT "platform"
#define PARTS_DATA "data"
#define PARTS_UMS "ums"
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
"name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
"name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
"name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
"name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
#define CONFIG_DFU_ALT \
"u-boot raw 0x80 0x400;" \
"/uImage ext4 0 2;" \
"/modem.bin ext4 0 2;" \
"/exynos4210-trats.dtb ext4 0 2;" \
""PARTS_CSA" part 0 1;" \
""PARTS_BOOT" part 0 2;" \
""PARTS_QBOOT" part 0 3;" \
""PARTS_CSC" part 0 4;" \
""PARTS_ROOT" part 0 5;" \
""PARTS_DATA" part 0 6;" \
""PARTS_UMS" part 0 7;" \
"params.bin raw 0x38 0x8;" \
"/Image.itb ext4 0 2\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
"run loaduimage;" \
"if run loaddtb; then " \
"bootm 0x40007FC0 - ${fdtaddr};" \
"fi;" \
"bootm 0x40007FC0;\0" \
"updatebackup=" \
"mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
"mmc dev 0 0\0" \
"updatebootb=" \
"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
"lpj=lpj=3981312\0" \
"nfsboot=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${nfsroot},nolock,tcp " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
"; run bootk\0" \
"ramfsboot=" \
"setenv bootargs root=/dev/ram0 rw rootfstype=ext2 " \
"${console} ${meminfo} " \
"initrd=0x43000000,8M ramdisk=8192\0" \
"mmcboot=" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
"run bootk\0" \
"bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"meminfo=crashkernel=32M@0x50000000\0" \
"nfsroot=/nfsroot/arm\0" \
"bootblock=" CONFIG_BOOTBLOCK "\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
"${fdtfile}\0" \
"mmcdev=0\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
"opts=always_resume=1\0" \
"partitions=" PARTS_DEFAULT \
"dfu_alt_info=" CONFIG_DFU_ALT \
"spladdr=0x40000100\0" \
"splsize=0x200\0" \
"splfile=falcon.bin\0" \
"spl_export=" \
"setexpr spl_imgsize ${splsize} + 8 ;" \
"setenv spl_imgsize 0x${spl_imgsize};" \
"setexpr spl_imgaddr ${spladdr} - 8 ;" \
"setexpr spl_addr_tmp ${spladdr} - 4 ;" \
"mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
"spl export atags 0x40007FC0;" \
"crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
"mw.l ${spl_addr_tmp} ${splsize};" \
"ext4write mmc ${mmcdev}:${mmcbootpart}" \
" /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
"setenv spl_imgsize;" \
"setenv spl_imgaddr;" \
"setenv spl_addr_tmp;\0" \
CONFIG_EXTRA_ENV_ITB \
"fdtaddr=40800000\0" \
/* Falcon mode definitions */
#define CONFIG_SYS_SPL_ARGS_ADDR CONFIG_SYS_SDRAM_BASE + 0x100
/* GPT */
/* Security subsystem - enable hw_rand() */
#define CONFIG_EXYNOS_ACE_SHA
/* Common misc for Samsung */
#define CONFIG_MISC_COMMON
/* Download menu - Samsung common */
#define CONFIG_LCD_MENU
/* Download menu - definitions for check keys */
#ifndef __ASSEMBLY__
#define KEY_PWR_PMIC_NAME "MAX8997_PMIC"
#define KEY_PWR_STATUS_REG MAX8997_REG_STATUS1
#define KEY_PWR_STATUS_MASK (1 << 0)
#define KEY_PWR_INTERRUPT_REG MAX8997_REG_INT1
#define KEY_PWR_INTERRUPT_MASK (1 << 0)
#define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20
#define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21
#endif /* __ASSEMBLY__ */
/* LCD console */
#define LCD_BPP LCD_COLOR16
/* LCD */
#define CONFIG_BMP_16BPP
#define CONFIG_FB_ADDR 0x52504000
#define CONFIG_EXYNOS_MIPI_DSIM
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
#endif /* __CONFIG_H */