mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
b7adcdd073
The commit e8e9715df2 ("regulator: fixed: Modify enable-active-high behavior")
fixed the regulator driver behavior when 'enable-active-high' is defined.
Unfortunately, this patch used dm_regulator_platdata()'s "boot_on" member
to set GPIOD_IS_OUT_ACTIVE flag and enable the regulator.
The issue here is that regulator_common_ofdata_to_platdata() is called
_before_ regulator_pre_probe() function in which the 'regulator-boot-on'
property is asserted.
As a result the GPIOD_IS_OUT_ACTIVE flag is not set and gpio_request_by_name()
called in the former function is not enabling the regulator.
This is problematic for e.g. i.MX ethernet driver, which then tries to
perform initialization without power (and fails).
The solution here is to explicitly enable regulator in regulator_pre_probe()
callback only when 'regulator-boot-on' property is present in device tree.
The GPIOD_IS_OUT_ACTIVE flag is not set at all, but relevant gpio is
requested.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
84 lines
2.1 KiB
C
84 lines
2.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2019 Disruptive Technologies Research AS
|
|
* Sven Schwermer <sven.svenschwermer@disruptive-technologies.com>
|
|
*/
|
|
|
|
#include "regulator_common.h"
|
|
#include <common.h>
|
|
#include <power/regulator.h>
|
|
|
|
int regulator_common_ofdata_to_platdata(struct udevice *dev,
|
|
struct regulator_common_platdata *dev_pdata, const char *enable_gpio_name)
|
|
{
|
|
struct gpio_desc *gpio;
|
|
int flags = GPIOD_IS_OUT;
|
|
int ret;
|
|
|
|
if (!dev_read_bool(dev, "enable-active-high"))
|
|
flags |= GPIOD_ACTIVE_LOW;
|
|
|
|
/* Get optional enable GPIO desc */
|
|
gpio = &dev_pdata->gpio;
|
|
ret = gpio_request_by_name(dev, enable_gpio_name, 0, gpio, flags);
|
|
if (ret) {
|
|
debug("Regulator '%s' optional enable GPIO - not found! Error: %d\n",
|
|
dev->name, ret);
|
|
if (ret != -ENOENT)
|
|
return ret;
|
|
}
|
|
|
|
/* Get optional ramp up delay */
|
|
dev_pdata->startup_delay_us = dev_read_u32_default(dev,
|
|
"startup-delay-us", 0);
|
|
dev_pdata->off_on_delay_us =
|
|
dev_read_u32_default(dev, "off-on-delay-us", 0);
|
|
if (!dev_pdata->off_on_delay_us) {
|
|
dev_pdata->off_on_delay_us =
|
|
dev_read_u32_default(dev, "u-boot,off-on-delay-us", 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int regulator_common_get_enable(const struct udevice *dev,
|
|
struct regulator_common_platdata *dev_pdata)
|
|
{
|
|
/* Enable GPIO is optional */
|
|
if (!dev_pdata->gpio.dev)
|
|
return true;
|
|
|
|
return dm_gpio_get_value(&dev_pdata->gpio);
|
|
}
|
|
|
|
int regulator_common_set_enable(const struct udevice *dev,
|
|
struct regulator_common_platdata *dev_pdata, bool enable)
|
|
{
|
|
int ret;
|
|
|
|
debug("%s: dev='%s', enable=%d, delay=%d, has_gpio=%d\n", __func__,
|
|
dev->name, enable, dev_pdata->startup_delay_us,
|
|
dm_gpio_is_valid(&dev_pdata->gpio));
|
|
/* Enable GPIO is optional */
|
|
if (!dm_gpio_is_valid(&dev_pdata->gpio)) {
|
|
if (!enable)
|
|
return -ENOSYS;
|
|
return 0;
|
|
}
|
|
|
|
ret = dm_gpio_set_value(&dev_pdata->gpio, enable);
|
|
if (ret) {
|
|
pr_err("Can't set regulator : %s gpio to: %d\n", dev->name,
|
|
enable);
|
|
return ret;
|
|
}
|
|
|
|
if (enable && dev_pdata->startup_delay_us)
|
|
udelay(dev_pdata->startup_delay_us);
|
|
debug("%s: done\n", __func__);
|
|
|
|
if (!enable && dev_pdata->off_on_delay_us)
|
|
udelay(dev_pdata->off_on_delay_us);
|
|
|
|
return 0;
|
|
}
|