mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
d36c94279d
The following warning is seen in sifive_ddr.c in a 32-bit build: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Change to use dev_read_addr_index_ptr(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
411 lines
10 KiB
C
411 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* (C) Copyright 2020-2021 SiFive, Inc.
|
|
*
|
|
* Authors:
|
|
* Pragnesh Patel <pragnesh.patel@sifive.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <init.h>
|
|
#include <ram.h>
|
|
#include <syscon.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <clk.h>
|
|
#include <wait_bit.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#define DENALI_CTL_0 0
|
|
#define DENALI_CTL_21 21
|
|
#define DENALI_CTL_120 120
|
|
#define DENALI_CTL_132 132
|
|
#define DENALI_CTL_136 136
|
|
#define DENALI_CTL_170 170
|
|
#define DENALI_CTL_181 181
|
|
#define DENALI_CTL_182 182
|
|
#define DENALI_CTL_184 184
|
|
#define DENALI_CTL_208 208
|
|
#define DENALI_CTL_209 209
|
|
#define DENALI_CTL_210 210
|
|
#define DENALI_CTL_212 212
|
|
#define DENALI_CTL_214 214
|
|
#define DENALI_CTL_216 216
|
|
#define DENALI_CTL_224 224
|
|
#define DENALI_CTL_225 225
|
|
#define DENALI_CTL_260 260
|
|
|
|
#define DENALI_PHY_1152 1152
|
|
#define DENALI_PHY_1214 1214
|
|
|
|
#define DRAM_CLASS_OFFSET 8
|
|
#define DRAM_CLASS_DDR4 0xA
|
|
#define OPTIMAL_RMODW_EN_OFFSET 0
|
|
#define DISABLE_RD_INTERLEAVE_OFFSET 16
|
|
#define OUT_OF_RANGE_OFFSET 1
|
|
#define MULTIPLE_OUT_OF_RANGE_OFFSET 2
|
|
#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7
|
|
#define MC_INIT_COMPLETE_OFFSET 8
|
|
#define LEVELING_OPERATION_COMPLETED_OFFSET 22
|
|
#define DFI_PHY_WRLELV_MODE_OFFSET 24
|
|
#define DFI_PHY_RDLVL_MODE_OFFSET 24
|
|
#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0
|
|
#define VREF_EN_OFFSET 24
|
|
#define PORT_ADDR_PROTECTION_EN_OFFSET 0
|
|
#define AXI0_ADDRESS_RANGE_ENABLE 8
|
|
#define AXI0_RANGE_PROT_BITS_0_OFFSET 24
|
|
#define RDLVL_EN_OFFSET 16
|
|
#define RDLVL_GATE_EN_OFFSET 24
|
|
#define WRLVL_EN_OFFSET 0
|
|
|
|
#define PHY_RX_CAL_DQ0_0_OFFSET 0
|
|
#define PHY_RX_CAL_DQ1_0_OFFSET 16
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct sifive_ddrctl {
|
|
volatile u32 denali_ctl[265];
|
|
};
|
|
|
|
struct sifive_ddrphy {
|
|
volatile u32 denali_phy[1215];
|
|
};
|
|
|
|
/**
|
|
* struct sifive_ddr_info
|
|
*
|
|
* @dev : pointer for the device
|
|
* @info : UCLASS RAM information
|
|
* @ctl : DDR controller base address
|
|
* @phy : DDR PHY base address
|
|
* @ctrl : DDR control base address
|
|
* @physical_filter_ctrl : DDR physical filter control base address
|
|
*/
|
|
struct sifive_ddr_info {
|
|
struct udevice *dev;
|
|
struct ram_info info;
|
|
struct sifive_ddrctl *ctl;
|
|
struct sifive_ddrphy *phy;
|
|
struct clk ddr_clk;
|
|
u32 *physical_filter_ctrl;
|
|
};
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
struct sifive_ddr_params {
|
|
struct sifive_ddrctl pctl_regs;
|
|
struct sifive_ddrphy phy_regs;
|
|
};
|
|
|
|
struct sifive_dmc_plat {
|
|
struct sifive_ddr_params ddr_params;
|
|
};
|
|
|
|
/*
|
|
* TODO : It can be possible to use common sdram_copy_to_reg() API
|
|
* n: Unit bytes
|
|
*/
|
|
static void sdram_copy_to_reg(volatile u32 *dest,
|
|
volatile u32 *src, u32 n)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < n / sizeof(u32); i++) {
|
|
writel(*src, dest);
|
|
src++;
|
|
dest++;
|
|
}
|
|
}
|
|
|
|
static void sifive_ddr_setup_range_protection(volatile u32 *ctl, u64 end_addr)
|
|
{
|
|
u32 end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1;
|
|
|
|
writel(0x0, DENALI_CTL_209 + ctl);
|
|
writel(end_addr_16kblocks, DENALI_CTL_210 + ctl);
|
|
writel(0x0, DENALI_CTL_212 + ctl);
|
|
writel(0x0, DENALI_CTL_214 + ctl);
|
|
writel(0x0, DENALI_CTL_216 + ctl);
|
|
setbits_le32(DENALI_CTL_224 + ctl,
|
|
0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET);
|
|
writel(0xFFFFFFFF, DENALI_CTL_225 + ctl);
|
|
setbits_le32(DENALI_CTL_208 + ctl, 0x1 << AXI0_ADDRESS_RANGE_ENABLE);
|
|
setbits_le32(DENALI_CTL_208 + ctl,
|
|
0x1 << PORT_ADDR_PROTECTION_EN_OFFSET);
|
|
}
|
|
|
|
static void sifive_ddr_start(volatile u32 *ctl, u32 *physical_filter_ctrl,
|
|
u64 ddr_end)
|
|
{
|
|
volatile u64 *filterreg = (volatile u64 *)physical_filter_ctrl;
|
|
|
|
setbits_le32(DENALI_CTL_0 + ctl, 0x1);
|
|
|
|
wait_for_bit_le32((void *)ctl + DENALI_CTL_132,
|
|
BIT(MC_INIT_COMPLETE_OFFSET), false, 100, false);
|
|
|
|
/* Disable the BusBlocker in front of the controller AXI slave ports */
|
|
filterreg[0] = 0x0f00000000000000UL | (ddr_end >> 2);
|
|
}
|
|
|
|
static void sifive_ddr_check_errata(u32 regbase, u32 updownreg)
|
|
{
|
|
u64 fails = 0;
|
|
u32 dq = 0;
|
|
u32 down, up;
|
|
u8 failc0, failc1;
|
|
u32 phy_rx_cal_dqn_0_offset;
|
|
|
|
for (u32 bit = 0; bit < 2; bit++) {
|
|
if (bit == 0) {
|
|
phy_rx_cal_dqn_0_offset =
|
|
PHY_RX_CAL_DQ0_0_OFFSET;
|
|
} else {
|
|
phy_rx_cal_dqn_0_offset =
|
|
PHY_RX_CAL_DQ1_0_OFFSET;
|
|
}
|
|
|
|
down = (updownreg >>
|
|
phy_rx_cal_dqn_0_offset) & 0x3F;
|
|
up = (updownreg >>
|
|
(phy_rx_cal_dqn_0_offset + 6)) &
|
|
0x3F;
|
|
|
|
failc0 = ((down == 0) && (up == 0x3F));
|
|
failc1 = ((up == 0) && (down == 0x3F));
|
|
|
|
/* print error message on failure */
|
|
if (failc0 || failc1) {
|
|
if (fails == 0)
|
|
printf("DDR error in fixing up\n");
|
|
|
|
fails |= (1 << dq);
|
|
|
|
char slicelsc = '0';
|
|
char slicemsc = '0';
|
|
|
|
slicelsc += (dq % 10);
|
|
slicemsc += (dq / 10);
|
|
printf("S ");
|
|
printf("%c", slicemsc);
|
|
printf("%c", slicelsc);
|
|
|
|
if (failc0)
|
|
printf("U");
|
|
else
|
|
printf("D");
|
|
|
|
printf("\n");
|
|
}
|
|
dq++;
|
|
}
|
|
}
|
|
|
|
static u64 sifive_ddr_phy_fixup(volatile u32 *ddrphyreg)
|
|
{
|
|
u32 slicebase = 0;
|
|
|
|
/* check errata condition */
|
|
for (u32 slice = 0; slice < 8; slice++) {
|
|
u32 regbase = slicebase + 34;
|
|
|
|
for (u32 reg = 0; reg < 4; reg++) {
|
|
u32 updownreg = readl(regbase + reg + ddrphyreg);
|
|
|
|
sifive_ddr_check_errata(regbase, updownreg);
|
|
}
|
|
slicebase += 128;
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
static u32 sifive_ddr_get_dram_class(volatile u32 *ctl)
|
|
{
|
|
u32 reg = readl(DENALI_CTL_0 + ctl);
|
|
|
|
return ((reg >> DRAM_CLASS_OFFSET) & 0xF);
|
|
}
|
|
|
|
static int sifive_ddr_setup(struct udevice *dev)
|
|
{
|
|
struct sifive_ddr_info *priv = dev_get_priv(dev);
|
|
struct sifive_dmc_plat *plat = dev_get_plat(dev);
|
|
struct sifive_ddr_params *params = &plat->ddr_params;
|
|
volatile u32 *denali_ctl = priv->ctl->denali_ctl;
|
|
volatile u32 *denali_phy = priv->phy->denali_phy;
|
|
const u64 ddr_size = priv->info.size;
|
|
const u64 ddr_end = priv->info.base + ddr_size;
|
|
int ret, i;
|
|
u32 physet;
|
|
|
|
ret = dev_read_u32_array(dev, "sifive,ddr-params",
|
|
(u32 *)&plat->ddr_params,
|
|
sizeof(plat->ddr_params) / sizeof(u32));
|
|
if (ret) {
|
|
printf("%s: Cannot read sifive,ddr-params %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
sdram_copy_to_reg(priv->ctl->denali_ctl,
|
|
params->pctl_regs.denali_ctl,
|
|
sizeof(struct sifive_ddrctl));
|
|
|
|
/* phy reset */
|
|
for (i = DENALI_PHY_1152; i <= DENALI_PHY_1214; i++) {
|
|
physet = params->phy_regs.denali_phy[i];
|
|
priv->phy->denali_phy[i] = physet;
|
|
}
|
|
|
|
for (i = 0; i < DENALI_PHY_1152; i++) {
|
|
physet = params->phy_regs.denali_phy[i];
|
|
priv->phy->denali_phy[i] = physet;
|
|
}
|
|
|
|
/* Disable read interleave DENALI_CTL_120 */
|
|
setbits_le32(DENALI_CTL_120 + denali_ctl,
|
|
1 << DISABLE_RD_INTERLEAVE_OFFSET);
|
|
|
|
/* Disable optimal read/modify/write logic DENALI_CTL_21 */
|
|
clrbits_le32(DENALI_CTL_21 + denali_ctl, 1 << OPTIMAL_RMODW_EN_OFFSET);
|
|
|
|
/* Enable write Leveling DENALI_CTL_170 */
|
|
setbits_le32(DENALI_CTL_170 + denali_ctl, (1 << WRLVL_EN_OFFSET)
|
|
| (1 << DFI_PHY_WRLELV_MODE_OFFSET));
|
|
|
|
/* Enable read leveling DENALI_CTL_181 and DENALI_CTL_260 */
|
|
setbits_le32(DENALI_CTL_181 + denali_ctl,
|
|
1 << DFI_PHY_RDLVL_MODE_OFFSET);
|
|
setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_EN_OFFSET);
|
|
|
|
/* Enable read leveling gate DENALI_CTL_260 and DENALI_CTL_182 */
|
|
setbits_le32(DENALI_CTL_260 + denali_ctl, 1 << RDLVL_GATE_EN_OFFSET);
|
|
setbits_le32(DENALI_CTL_182 + denali_ctl,
|
|
1 << DFI_PHY_RDLVL_GATE_MODE_OFFSET);
|
|
|
|
if (sifive_ddr_get_dram_class(denali_ctl) == DRAM_CLASS_DDR4) {
|
|
/* Enable vref training DENALI_CTL_184 */
|
|
setbits_le32(DENALI_CTL_184 + denali_ctl, 1 << VREF_EN_OFFSET);
|
|
}
|
|
|
|
/* Mask off leveling completion interrupt DENALI_CTL_136 */
|
|
setbits_le32(DENALI_CTL_136 + denali_ctl,
|
|
1 << LEVELING_OPERATION_COMPLETED_OFFSET);
|
|
|
|
/* Mask off MC init complete interrupt DENALI_CTL_136 */
|
|
setbits_le32(DENALI_CTL_136 + denali_ctl, 1 << MC_INIT_COMPLETE_OFFSET);
|
|
|
|
/* Mask off out of range interrupts DENALI_CTL_136 */
|
|
setbits_le32(DENALI_CTL_136 + denali_ctl, (1 << OUT_OF_RANGE_OFFSET)
|
|
| (1 << MULTIPLE_OUT_OF_RANGE_OFFSET));
|
|
|
|
/* set up range protection */
|
|
sifive_ddr_setup_range_protection(denali_ctl, priv->info.size);
|
|
|
|
/* Mask off port command error interrupt DENALI_CTL_136 */
|
|
setbits_le32(DENALI_CTL_136 + denali_ctl,
|
|
1 << PORT_COMMAND_CHANNEL_ERROR_OFFSET);
|
|
|
|
sifive_ddr_start(denali_ctl, priv->physical_filter_ctrl, ddr_end);
|
|
|
|
sifive_ddr_phy_fixup(denali_phy);
|
|
|
|
/* check size */
|
|
priv->info.size = get_ram_size((long *)(uintptr_t)priv->info.base,
|
|
ddr_size);
|
|
|
|
debug("%s : %lx\n", __func__, (uintptr_t)priv->info.size);
|
|
|
|
/* check memory access for all memory */
|
|
if (priv->info.size != ddr_size) {
|
|
printf("DDR invalid size : 0x%lx, expected 0x%lx\n",
|
|
(uintptr_t)priv->info.size, (uintptr_t)ddr_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int sifive_ddr_probe(struct udevice *dev)
|
|
{
|
|
struct sifive_ddr_info *priv = dev_get_priv(dev);
|
|
|
|
/* Read memory base and size from DT */
|
|
fdtdec_setup_mem_size_base();
|
|
priv->info.base = gd->ram_base;
|
|
priv->info.size = gd->ram_size;
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
int ret;
|
|
u32 clock = 0;
|
|
|
|
debug("sifive DDR probe\n");
|
|
priv->dev = dev;
|
|
|
|
ret = clk_get_by_index(dev, 0, &priv->ddr_clk);
|
|
if (ret) {
|
|
debug("clk get failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = dev_read_u32(dev, "clock-frequency", &clock);
|
|
if (ret) {
|
|
debug("clock-frequency not found in dt %d\n", ret);
|
|
return ret;
|
|
} else {
|
|
ret = clk_set_rate(&priv->ddr_clk, clock);
|
|
if (ret < 0) {
|
|
debug("Could not set DDR clock\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = clk_enable(&priv->ddr_clk);
|
|
if (ret < 0) {
|
|
debug("Could not enable DDR clock\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->ctl = (struct sifive_ddrctl *)dev_read_addr_index_ptr(dev, 0);
|
|
priv->phy = (struct sifive_ddrphy *)dev_read_addr_index_ptr(dev, 1);
|
|
priv->physical_filter_ctrl = (u32 *)dev_read_addr_index_ptr(dev, 2);
|
|
|
|
return sifive_ddr_setup(dev);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sifive_ddr_get_info(struct udevice *dev, struct ram_info *info)
|
|
{
|
|
struct sifive_ddr_info *priv = dev_get_priv(dev);
|
|
|
|
*info = priv->info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ram_ops sifive_ddr_ops = {
|
|
.get_info = sifive_ddr_get_info,
|
|
};
|
|
|
|
static const struct udevice_id sifive_ddr_ids[] = {
|
|
{ .compatible = "sifive,fu540-c000-ddr" },
|
|
{ .compatible = "sifive,fu740-c000-ddr" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sifive_ddr) = {
|
|
.name = "sifive_ddr",
|
|
.id = UCLASS_RAM,
|
|
.of_match = sifive_ddr_ids,
|
|
.ops = &sifive_ddr_ops,
|
|
.probe = sifive_ddr_probe,
|
|
.priv_auto = sizeof(struct sifive_ddr_info),
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
.plat_auto = sizeof(struct sifive_dmc_plat),
|
|
#endif
|
|
};
|