mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
dfadb946f6
With the introduction of pcie_dw_rockchip, and need to support the DW PCIe in the Amlogic AXG & G12 SoCs, most of the DW PCIe helpers would be duplicated. This introduce a "common" DW PCIe helpers file with common code merged from the dw_ti and dw_rockchip drivers and adapted to fit with the upcoming dw_meson. The following changes will switch the dw_ti and dw_rockchip to use these helpers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Green Wan <green.wan@sifive.com> [bmeng: remove the blank line at EOF of drivers/pci/pcie_dw_common.c] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
155 lines
5 KiB
C
155 lines
5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (c) 2021 BayLibre, SAS
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
*
|
|
* Copyright (c) 2021 Rockchip, Inc.
|
|
*
|
|
* Copyright (C) 2018 Texas Instruments, Inc
|
|
*/
|
|
|
|
#ifndef PCIE_DW_COMMON_H
|
|
#define PCIE_DW_COMMON_H
|
|
|
|
#define DEFAULT_DBI_ATU_OFFSET (0x3 << 20)
|
|
|
|
/* PCI DBICS registers */
|
|
#define PCIE_LINK_STATUS_REG 0x80
|
|
#define PCIE_LINK_STATUS_SPEED_OFF 16
|
|
#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF)
|
|
#define PCIE_LINK_STATUS_WIDTH_OFF 20
|
|
#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF)
|
|
|
|
/*
|
|
* iATU Unroll-specific register definitions
|
|
* From 4.80 core version the address translation will be made by unroll.
|
|
* The registers are offset from atu_base
|
|
*/
|
|
#define PCIE_ATU_UNR_REGION_CTRL1 0x00
|
|
#define PCIE_ATU_UNR_REGION_CTRL2 0x04
|
|
#define PCIE_ATU_UNR_LOWER_BASE 0x08
|
|
#define PCIE_ATU_UNR_UPPER_BASE 0x0c
|
|
#define PCIE_ATU_UNR_LIMIT 0x10
|
|
#define PCIE_ATU_UNR_LOWER_TARGET 0x14
|
|
#define PCIE_ATU_UNR_UPPER_TARGET 0x18
|
|
|
|
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_IO (0x2 << 0)
|
|
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
|
|
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
|
|
#define PCIE_ATU_ENABLE (0x1 << 31)
|
|
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
|
|
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
|
|
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
|
|
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
|
|
|
|
/* Register address builder */
|
|
#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((region) << 9)
|
|
|
|
/* Parameters for the waiting for iATU enabled routine */
|
|
#define LINK_WAIT_MAX_IATU_RETRIES 5
|
|
#define LINK_WAIT_IATU_US 10000
|
|
|
|
/* PCI DBICS registers */
|
|
#define PCIE_LINK_STATUS_REG 0x80
|
|
#define PCIE_LINK_STATUS_SPEED_OFF 16
|
|
#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF)
|
|
#define PCIE_LINK_STATUS_WIDTH_OFF 20
|
|
#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF)
|
|
|
|
#define PCIE_LINK_CAPABILITY 0x7c
|
|
#define PCIE_LINK_CTL_2 0xa0
|
|
#define TARGET_LINK_SPEED_MASK 0xf
|
|
#define LINK_SPEED_GEN_1 0x1
|
|
#define LINK_SPEED_GEN_2 0x2
|
|
#define LINK_SPEED_GEN_3 0x3
|
|
|
|
/* Synopsys-specific PCIe configuration registers */
|
|
#define PCIE_PORT_LINK_CONTROL 0x710
|
|
#define PORT_LINK_DLL_LINK_EN BIT(5)
|
|
#define PORT_LINK_FAST_LINK_MODE BIT(7)
|
|
#define PORT_LINK_MODE_MASK GENMASK(21, 16)
|
|
#define PORT_LINK_MODE(n) FIELD_PREP(PORT_LINK_MODE_MASK, n)
|
|
#define PORT_LINK_MODE_1_LANES PORT_LINK_MODE(0x1)
|
|
#define PORT_LINK_MODE_2_LANES PORT_LINK_MODE(0x3)
|
|
#define PORT_LINK_MODE_4_LANES PORT_LINK_MODE(0x7)
|
|
#define PORT_LINK_MODE_8_LANES PORT_LINK_MODE(0xf)
|
|
|
|
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
|
|
#define PORT_LOGIC_N_FTS_MASK GENMASK(7, 0)
|
|
#define PORT_LOGIC_SPEED_CHANGE BIT(17)
|
|
#define PORT_LOGIC_LINK_WIDTH_MASK GENMASK(12, 8)
|
|
#define PORT_LOGIC_LINK_WIDTH(n) FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n)
|
|
#define PORT_LOGIC_LINK_WIDTH_1_LANES PORT_LOGIC_LINK_WIDTH(0x1)
|
|
#define PORT_LOGIC_LINK_WIDTH_2_LANES PORT_LOGIC_LINK_WIDTH(0x2)
|
|
#define PORT_LOGIC_LINK_WIDTH_4_LANES PORT_LOGIC_LINK_WIDTH(0x4)
|
|
#define PORT_LOGIC_LINK_WIDTH_8_LANES PORT_LOGIC_LINK_WIDTH(0x8)
|
|
|
|
#define PCIE_MISC_CONTROL_1_OFF 0x8bc
|
|
#define PCIE_DBI_RO_WR_EN BIT(0)
|
|
|
|
/* Parameters for the waiting for iATU enabled routine */
|
|
#define LINK_WAIT_MAX_IATU_RETRIES 5
|
|
#define LINK_WAIT_IATU 10000
|
|
|
|
/**
|
|
* struct pcie_dw - DW PCIe controller state
|
|
*
|
|
* @dbi_base: The base address of dbi register space
|
|
* @cfg_base: The base address of configuration space
|
|
* @atu_base: The base address of ATU space
|
|
* @cfg_size: The size of the configuration space which is needed
|
|
* as it gets written into the PCIE_ATU_LIMIT register
|
|
* @first_busno: This driver supports multiple PCIe controllers.
|
|
* first_busno stores the bus number of the PCIe root-port
|
|
* number which may vary depending on the PCIe setup
|
|
* (PEX switches etc).
|
|
* @io: The IO space for EP's BAR
|
|
* @mem: The memory space for EP's BAR
|
|
* @prefetch: The prefetch space for EP's BAR
|
|
*/
|
|
struct pcie_dw {
|
|
struct udevice *dev;
|
|
void __iomem *dbi_base;
|
|
void __iomem *cfg_base;
|
|
void __iomem *atu_base;
|
|
fdt_size_t cfg_size;
|
|
|
|
int first_busno;
|
|
|
|
/* IO, MEM & PREFETCH PCI regions */
|
|
struct pci_region io;
|
|
struct pci_region mem;
|
|
struct pci_region prefetch;
|
|
};
|
|
|
|
int pcie_dw_get_link_speed(struct pcie_dw *pci);
|
|
|
|
int pcie_dw_get_link_width(struct pcie_dw *pci);
|
|
|
|
int pcie_dw_prog_outbound_atu_unroll(struct pcie_dw *pci, int index, int type, u64 cpu_addr,
|
|
u64 pci_addr, u32 size);
|
|
|
|
int pcie_dw_read_config(const struct udevice *bus, pci_dev_t bdf, uint offset, ulong *valuep,
|
|
enum pci_size_t size);
|
|
|
|
int pcie_dw_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, ulong value,
|
|
enum pci_size_t size);
|
|
|
|
static inline void dw_pcie_dbi_write_enable(struct pcie_dw *pci, bool en)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(pci->dbi_base + PCIE_MISC_CONTROL_1_OFF);
|
|
if (en)
|
|
val |= PCIE_DBI_RO_WR_EN;
|
|
else
|
|
val &= ~PCIE_DBI_RO_WR_EN;
|
|
writel(val, pci->dbi_base + PCIE_MISC_CONTROL_1_OFF);
|
|
}
|
|
|
|
void pcie_dw_setup_host(struct pcie_dw *pci);
|
|
|
|
#endif
|