Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-25 20:43:32 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/x86/dts/chromebook_coral.dts
Alistair Delva daf26a6bc2 x86: chromebook_coral: fix C block comment 
Fix a warning seen when compiling this dts file.

Signed-off-by: Alistair Delva <adelva@google.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-01 09:50:55 +08:00

1257 lines
39 KiB
Text
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/x86-gpio.h>
/include/ "skeleton.dtsi"
/include/ "keyboard.dtsi"
/include/ "reset.dtsi"
/include/ "rtc.dtsi"
#include "tsc_timer.dtsi"
#if defined(CONFIG_CHROMEOS_VBOOT) && defined(CONFIG_ROM_SIZE)
#include "chromeos-x86.dtsi"
#include "flashmap-x86-ro.dtsi"
#include "flashmap-16mb-rw.dtsi"
#endif
#include <dt-bindings/clock/intel-clock.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/x86-irq.h>
#include <asm/e820.h>
#include <asm/intel_pinctrl_defs.h>
#include <asm/arch-apollolake/cpu.h>
#include <asm/arch-apollolake/gpe.h>
#include <asm/arch-apollolake/gpio.h>
#include <asm/arch-apollolake/iomap.h>
#include <asm/arch-apollolake/pm.h>
#include <dt-bindings/clock/intel-clock.h>
#include <asm/arch-apollolake/fsp/fsp_m_upd.h>
#include <asm/arch-apollolake/fsp/fsp_s_upd.h>
#include <dt-bindings/sound/nhlt.h>
/ {
model = "Google Coral";
compatible = "google,coral", "intel,apollolake";
aliases {
cros-ec0 = &cros_ec;
fsp = &fsp_s;
spi0 = &spi;
i2c0 = &i2c_0;
i2c1 = &i2c_1;
i2c2 = &i2c_2;
i2c3 = &i2c_3;
i2c4 = &i2c_4;
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
mmc0 = &emmc;
mmc1 = &sdmmc;
};
board: board {
compatible = "google,coral";
recovery-gpios = <&gpio_nw (-1) GPIO_ACTIVE_LOW>;
write-protect-gpios = <&gpio_nw GPIO_75 GPIO_ACTIVE_HIGH>;
phase-enforce-gpios = <&gpio_n GPIO_10 GPIO_ACTIVE_HIGH>;
memconfig-gpios = <&gpio_nw GPIO_101 GPIO_ACTIVE_HIGH
&gpio_nw GPIO_102 GPIO_ACTIVE_HIGH
&gpio_n GPIO_38 GPIO_ACTIVE_HIGH
&gpio_n GPIO_45 GPIO_ACTIVE_HIGH>;
/*
* This is used for reef only:
*
* skuconfig-gpios = <&gpio_nw GPIO_16 GPIO_ACTIVE_HIGH
* &gpio_nw GPIO_17 GPIO_ACTIVE_HIGH>;
*/
smbios {
/* Type 1 table */
system {
manufacturer = "Google";
product = "Coral";
version = "rev2";
serial = "123456789";
sku = "sku3";
family = "Google_Coral";
};
/* Type 2 table */
baseboard {
manufacturer = "Google";
product = "Coral";
asset-tag = "ABC123";
};
/* Type 3 table */
chassis {
manufacturer = "Google";
};
};
};
config {
silent_console = <0>;
};
chosen {
stdout-path = &serial;
e820-entries = /bits/ 64 <
IOMAP_P2SB_BAR IOMAP_P2SB_SIZE E820_RESERVED
MCH_BASE_ADDRESS MCH_SIZE E820_RESERVED>;
u-boot,acpi-ssdt-order = <&cpu_0 &cpu_1 &cpu_2 &cpu_3
&i2c_0 &i2c_1 &i2c_2 &i2c_3 &i2c_4 &i2c_5
&sdmmc &maxim_codec &wifi &da_codec &tpm
&elan_touchscreen &raydium_touchscreen
&elan_touchpad &synaptics_touchpad &wacom_digitizer>;
u-boot,acpi-dsdt-order = <&board &lpc>;
};
clk: clock {
compatible = "intel,apl-clk";
#clock-cells = <1>;
u-boot,dm-pre-proper;
};
cpus {
u-boot,dm-pre-proper;
#address-cells = <1>;
#size-cells = <0>;
cpu_0: cpu@0 {
u-boot,dm-pre-proper;
u-boot,dm-spl;
device_type = "cpu";
compatible = "intel,apl-cpu";
reg = <0>;
intel,apic-id = <0>;
};
cpu_1: cpu@1 {
device_type = "cpu";
compatible = "intel,apl-cpu";
reg = <1>;
intel,apic-id = <2>;
};
cpu_2: cpu@2 {
device_type = "cpu";
compatible = "intel,apl-cpu";
reg = <2>;
intel,apic-id = <4>;
};
cpu_3: cpu@3 {
device_type = "cpu";
compatible = "intel,apl-cpu";
reg = <3>;
intel,apic-id = <6>;
};
};
acpi_gpe: general-purpose-events {
u-boot,dm-pre-proper;
reg = <IOMAP_ACPI_BASE IOMAP_ACPI_SIZE>;
compatible = "intel,acpi-gpe";
interrupt-controller;
#interrupt-cells = <2>;
};
coreboot-video {
/* This will only activate when booted from coreboot */
compatible = "coreboot-fb";
};
keyboard {
intel,duplicate-por;
};
pci {
compatible = "pci-x86";
#address-cells = <3>;
#size-cells = <2>;
u-boot,dm-pre-reloc;
ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000
0x42000000 0x0 0xb0000000 0xb0000000 0 0x10000000
0x01000000 0x0 0x1000 0x1000 0 0xefff>;
u-boot,skip-auto-config-until-reloc;
host_bridge: host-bridge@0,0 {
u-boot,dm-pre-reloc;
reg = <0x00000000 0 0 0 0>;
compatible = "intel,apl-hostbridge";
pciex-region-size = <0x10000000>;
fspm,training-delay = <21>;
/*
* Parameters used by the FSP-S binary blob. This is
* really unfortunate since these parameters mostly
* relate to drivers but we need them in one place. We
* could put them in the driver nodes easily, but then
* would have to scan each node to find them. So just
* dump them here for now.
*/
fsp_s: fsp-s {
};
fsp_m: fsp-m {
u-boot,dm-spl;
};
nhlt {
intel,dmic-channels = <4>;
};
};
punit@0,1 {
u-boot,dm-pre-proper;
u-boot,dm-spl;
reg = <0x00000800 0 0 0 0>;
compatible = "intel,apl-punit";
};
gma@2,0 {
u-boot,dm-pre-proper;
reg = <0x00001000 0 0 0 0>;
compatible = "fsp-fb";
};
p2sb: p2sb@d,0 {
u-boot,dm-pre-reloc;
reg = <0x02006810 0 0 0 0>;
compatible = "intel,p2sb";
early-regs = <IOMAP_P2SB_BAR 0x100000>;
pci,no-autoconfig;
n {
compatible = "intel,apl-pinctrl";
u-boot,dm-pre-reloc;
intel,p2sb-port-id = <PID_GPIO_N>;
acpi,path = "\\_SB.GPO0";
gpio_n: gpio-n {
compatible = "intel,gpio";
u-boot,dm-pre-reloc;
gpio-controller;
#gpio-cells = <2>;
linux-name = "INT3452:00";
};
};
nw {
u-boot,dm-pre-reloc;
compatible = "intel,apl-pinctrl";
intel,p2sb-port-id = <PID_GPIO_NW>;
#gpio-cells = <2>;
acpi,path = "\\_SB.GPO1";
gpio_nw: gpio-nw {
compatible = "intel,gpio";
u-boot,dm-pre-reloc;
gpio-controller;
#gpio-cells = <2>;
linux-name = "INT3452:01";
};
};
w {
u-boot,dm-pre-reloc;
compatible = "intel,apl-pinctrl";
intel,p2sb-port-id = <PID_GPIO_W>;
#gpio-cells = <2>;
acpi,path = "\\_SB.GPO2";
gpio_w: gpio-w {
compatible = "intel,gpio";
u-boot,dm-pre-reloc;
gpio-controller;
#gpio-cells = <2>;
linux-name = "INT3452:02";
};
};
sw {
u-boot,dm-pre-reloc;
compatible = "intel,apl-pinctrl";
intel,p2sb-port-id = <PID_GPIO_SW>;
#gpio-cells = <2>;
acpi,path = "\\_SB.GPO3";
gpio_sw: gpio-sw {
compatible = "intel,gpio";
u-boot,dm-pre-reloc;
gpio-controller;
#gpio-cells = <2>;
linux-name = "INT3452:03";
};
};
itss {
u-boot,dm-pre-reloc;
compatible = "intel,itss";
intel,p2sb-port-id = <PID_ITSS>;
intel,pmc-routes = <
PMC_GPE_SW_31_0 GPIO_GPE_SW_31_0
PMC_GPE_SW_63_32 GPIO_GPE_SW_63_32
PMC_GPE_NW_31_0 GPIO_GPE_NW_31_0
PMC_GPE_NW_63_32 GPIO_GPE_NW_63_32
PMC_GPE_NW_95_64 GPIO_GPE_NW_95_64
PMC_GPE_N_31_0 GPIO_GPE_N_31_0
PMC_GPE_N_63_32 GPIO_GPE_N_63_32
PMC_GPE_W_31_0 GPIO_GPE_W_31_0>;
};
};
pmc@d,1 {
u-boot,dm-pre-reloc;
reg = <0x6900 0 0 0 0>;
/*
* Values for BAR0, BAR2 and ACPI_BASE for when PCI
* auto-configure is not available
*/
early-regs = <0xfe042000 0x2000
0xfe044000 0x2000
IOMAP_ACPI_BASE IOMAP_ACPI_SIZE>;
compatible = "intel,apl-pmc";
gpe0-dwx-mask = <0xf>;
gpe0-dwx-shift-base = <4>;
/*
* GPE configuration
* Note that GPE events called out in ASL code rely on
* this route, i.e., if this route changes then the
* affected GPE * offset bits also need to be changed.
* This sets the PMC register GPE_CFG fields.
*/
gpe0-dw = <PMC_GPE_N_31_0
PMC_GPE_N_63_32
PMC_GPE_SW_31_0>;
gpe0-sts = <0x20>;
gpe0-en = <0x30>;
};
audio@e,0 {
reg = <0x7000 0 0 0 0>;
compatible = "simple-bus";
acpi,name = "HDAS";
i2s {
compatible = "fred";
};
maxim_codec: maxim-codec {
compatible = "maxim,max98357a";
acpi,ddn = "Maxim Integrated 98357A Amplifier";
sdmode-gpios = <&gpio_n GPIO_76 GPIO_ACTIVE_HIGH>;
sdmode-delay = <5>;
acpi,name = "MAXM";
acpi,hid = "MX98357A";
acpi,audio-link = <AUDIO_LINK_SSP5>;
};
};
spi: fast-spi@d,2 {
u-boot,dm-pre-proper;
u-boot,dm-spl;
reg = <0x02006a10 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,fast-spi";
early-regs = <IOMAP_SPI_BASE 0x1000>;
intel,hardware-seq = <1>;
fwstore_spi: spi-flash@0 {
#size-cells = <1>;
#address-cells = <1>;
u-boot,dm-pre-proper;
u-boot,dm-spl;
reg = <0>;
m25p,fast-read;
compatible = "winbond,w25q128fw",
"jedec,spi-nor";
rw-mrc-cache {
label = "rw-mrc-cache";
reg = <0x008e0000 0x00010000>;
u-boot,dm-pre-reloc;
};
rw-var-mrc-cache {
label = "rw-mrc-cache";
reg = <0x008f0000 0x0001000>;
u-boot,dm-pre-reloc;
};
};
};
/* WiFi */
pcie-a0@14,0 {
reg = <0x0000a000 0 0 0 0>;
acpi,name = "RP01";
wifi: wifi {
compatible = "intel,generic-wifi";
acpi,ddn = "Intel WiFi";
acpi,name = "WF00";
acpi,wake = <GPE0_DW3_00>;
interrupts-extended = <&acpi_gpe 0x3c 0>;
};
};
i2c_0: i2c2@16,0 {
compatible = "intel,apl-i2c";
reg = <0x0200b010 0 0 0 0>;
clocks = <&clk CLK_I2C>;
i2c-scl-rising-time-ns = <104>;
i2c-scl-falling-time-ns = <52>;
clock-frequency = <400000>;
i2c,speeds = <100000 400000 1000000>;
#address-cells = <1>;
#size-cells = <0>;
da_codec: da-codec {
reg = <0x1a>;
compatible = "dlg,da7219";
interrupts-extended = <&acpi_gpe GPIO_116_IRQ
(IRQ_TYPE_LEVEL_LOW | X86_IRQ_TYPE_SHARED)>;
acpi,name = "DLG7";
acpi,ddn = "Dialog Semiconductor DA7219 Audio Codec";
acpi,audio-link = <AUDIO_LINK_SSP1>;
dlg,micbias-lvl = <2600>;
dlg,mic-amp-in-sel = "diff";
da7219_aad {
dlg,btn-cfg = <50>;
dlg,mic-det-thr = <500>;
dlg,jack-ins-deb = <20>;
dlg,jack-det-rate = "32ms_64ms";
dlg,jack-rem-deb = <1>;
dlg,a-d-btn-thr = <0xa>;
dlg,d-b-btn-thr = <0x16>;
dlg,b-c-btn-thr = <0x21>;
dlg,c-mic-btn-thr = <0x3e>;
dlg,btn-avg = <4>;
dlg,adc-1bit-rpt = <1>;
};
};
};
i2c_1: i2c2@16,1 {
compatible = "intel,apl-i2c";
reg = <0x0200b110 0 0 0 0>;
clocks = <&clk CLK_I2C>;
clock-frequency = <400000>;
i2c,speeds = <100000 400000 1000000 3400000>;
i2c-scl-rising-time-ns = <52>;
i2c-scl-falling-time-ns = <52>;
};
i2c_2: i2c2@16,2 {
compatible = "intel,apl-i2c", "snps,designware-i2c-pci";
reg = <0x0200b210 0 0 0 0>;
early-regs = <IOMAP_I2C2_BASE 0x1000>;
u-boot,dm-pre-proper;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
i2c,speeds = <100000 400000 1000000>;
clocks = <&clk CLK_I2C>;
i2c-scl-rising-time-ns = <57>;
i2c-scl-falling-time-ns = <28>;
tpm: tpm@50 {
reg = <0x50>;
compatible = "google,cr50";
u-boot,dm-pre-proper;
u-boot,i2c-offset-len = <0>;
ready-gpios = <&gpio_n 28 GPIO_ACTIVE_LOW>;
interrupts-extended = <&acpi_gpe GPIO_28_IRQ
IRQ_TYPE_EDGE_FALLING>;
acpi,hid = "GOOG0005";
acpi,ddn = "I2C TPM";
acpi,name = "TPMI";
};
};
i2c_3: i2c2@16,3 {
compatible = "intel,apl-i2c";
reg = <0x0200b310 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_I2C>;
i2c-scl-rising-time-ns = <76>;
i2c-scl-falling-time-ns = <164>;
clock-frequency = <400000>;
i2c,speeds = <100000 400000>;
elan_touchscreen: elan-touchscreen@10 {
compatible = "i2c-chip";
reg = <0x10>;
acpi,hid = "ELAN0001";
acpi,ddn = "ELAN Touchscreen";
interrupts-extended = <&acpi_gpe GPIO_21_IRQ
IRQ_TYPE_EDGE_FALLING>;
linux,probed;
reset-gpios = <&gpio_n GPIO_36 GPIO_ACTIVE_HIGH>;
reset-delay-ms = <20>;
enable-gpios = <&gpio_n GPIO_152 GPIO_ACTIVE_HIGH>;
enable-delay-ms = <1>;
acpi,has-power-resource;
};
raydium_touchscreen: raydium-touchscreen@39 {
compatible = "i2c-chip";
reg = <0x39>;
acpi,hid = "RAYD0001";
acpi,ddn = "Raydium Touchscreen";
interrupts-extended = <&acpi_gpe GPIO_21_IRQ
IRQ_TYPE_EDGE_FALLING>;
linux,probed;
reset-gpios = <&gpio_n GPIO_36 GPIO_ACTIVE_HIGH>;
reset-delay-ms = <1>;
enable-gpios = <&gpio_n GPIO_152 GPIO_ACTIVE_HIGH>;
enable-delay-ms = <50>;
acpi,has-power-resource;
};
};
i2c_4: i2c2@17,0 {
compatible = "intel,apl-i2c";
reg = <0x0200b810 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_I2C>;
i2c-sda-hold-time-ns = <350>;
i2c-scl-rising-time-ns = <114>;
i2c-scl-falling-time-ns = <164>;
clock-frequency = <400000>;
i2c,speeds = <100000 400000>;
elan_touchpad: elan-touchpad@15 {
compatible = "i2c-chip";
reg = <0x15>;
u-boot,i2c-offset-len = <0>;
acpi,hid = "ELAN0000";
acpi,ddn = "ELAN Touchpad";
interrupts-extended = <&acpi_gpe GPIO_18_IRQ
IRQ_TYPE_EDGE_FALLING>;
acpi,wake = <GPE0_DW1_15>;
linux,probed;
};
synaptics_touchpad: synaptics-touchpad@2c {
compatible = "hid-over-i2c";
reg = <0x2c>;
acpi,hid = "PNP0C50";
acpi,ddn = "Synaptics Touchpad";
interrupts-extended = <&acpi_gpe GPIO_18_IRQ
IRQ_TYPE_EDGE_FALLING>;
acpi,wake = <GPE0_DW1_15>;
linux,probed;
hid-descr-addr = <0x20>;
};
};
i2c_5: i2c2@17,1 {
compatible = "intel,apl-i2c";
reg = <0x0200b910 0 0 0 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk CLK_I2C>;
i2c-scl-rising-time-ns = <76>;
i2c-scl-falling-time-ns = <164>;
clock-frequency = <400000>;
i2c,speeds = <100000 400000 1000000>;
wacom_digitizer: wacom-digitizer@9 {
compatible = "hid-over-i2c";
reg = <0x9>;
acpi,hid = "WCOM50C1";
acpi,ddn = "WCOM Digitizer";
interrupts-extended = <&acpi_gpe GPIO_13_IRQ
(IRQ_TYPE_LEVEL_LOW | X86_IRQ_TYPE_SHARED)>;
hid-descr-addr = <0x1>;
};
};
i2c_6: i2c2@17,2 {
compatible = "intel,apl-i2c";
reg = <0x0200ba10 0 0 0 0>;
clocks = <&clk CLK_I2C>;
status = "disabled";
};
i2c_7: i2c2@17,3 {
compatible = "intel,apl-i2c";
reg = <0x0200bb10 0 0 0 0>;
clocks = <&clk CLK_I2C>;
status = "disabled";
};
serial: serial@18,2 {
reg = <0x0200c210 0 0 0 0>;
u-boot,dm-pre-reloc;
compatible = "intel,apl-ns16550";
early-regs = <0xde000000 0x20>;
reg-shift = <2>;
clock-frequency = <1843200>;
current-speed = <115200>;
acpi,name = "URT3";
pci,no-autoconfig;
};
sdmmc: sdmmc@1b,0 {
reg = <0x0000d800 0 0 0 0>;
compatible = "intel,apl-sd";
cd-gpios = <&gpio_sw GPIO_177 GPIO_ACTIVE_LOW>;
acpi,name = "SDCD";
};
emmc: emmc@1c,0 {
reg = <0x0000e000 0 0 0 0>;
compatible = "intel,apl-emmc";
non-removable;
};
pch: pch@1f,0 {
reg = <0x0000f800 0 0 0 0>;
compatible = "intel,apl-pch";
u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
lpc: lpc {
compatible = "intel,apl-lpc";
#address-cells = <1>;
#size-cells = <0>;
u-boot,dm-pre-reloc;
cros_ec: cros-ec {
u-boot,dm-pre-proper;
u-boot,dm-vpl;
compatible = "google,cros-ec-lpc";
reg = <0x204 1 0x200 1 0x880 0x80>;
/*
* Describes the flash memory within
* the EC
*/
#address-cells = <1>;
#size-cells = <1>;
flash@8000000 {
reg = <0x08000000 0x20000>;
erase-value = <0xff>;
};
};
};
};
};
};
&host_bridge {
/*
* PL1 override 12000 mW: the energy calculation is wrong with the
* current VR solution. Experiments show that SoC TDP max (6W) can be
* reached when RAPL PL1 is set to 12W. Set RAPL PL2 to 15W.
*/
tdp-pl-override-mw = <12000 15000>;
early-pads = <
/* These two are for the debug UART */
GPIO_46 /* UART2 RX */
(PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
(PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
GPIO_47 /* UART2 TX */
(PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
(PAD_CFG1_PULL_NATIVE | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
GPIO_75 /* I2S1_BCLK -- PCH_WP */
(PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP)
(PAD_CFG1_PULL_UP_20K | PAD_CFG1_IOSSTATE_TXD_RXE)
/* I2C2 - TPM */
GPIO_128 /* LPSS_I2C2_SDA */
(PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
(PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
GPIO_129 /* LPSS_I2C2_SCL */
(PAD_CFG0_MODE_NF1 | PAD_CFG0_LOGICAL_RESET_DEEP)
(PAD_CFG1_PULL_UP_2K | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
GPIO_28 /* TPM IRQ */
(PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP |
PAD_CFG0_TX_DISABLE | PAD_CFG0_ROUTE_IOAPIC |
PAD_CFG0_TRIG_LEVEL | PAD_CFG0_RX_POL_INVERT)
(PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TXD_RXE)
PAD_CFG_GPI(GPIO_25, UP_20K, DEEP) /* unused */
/*
* WLAN_PE_RST - default to deasserted just in case FSP
* misbehaves
*/
GPIO_122 /* SIO_SPI_2_RXD */
(PAD_CFG0_MODE_GPIO | PAD_CFG0_LOGICAL_RESET_DEEP |
PAD_CFG0_RX_DISABLE | 0)
(PAD_CFG1_PULL_NONE | PAD_CFG1_IOSSTATE_TX_LAST_RXE)
/* LPC */
PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */
PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */
PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1)
PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1) /* LPC_AD0 */
PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1) /* LPC_AD1 */
PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1) /* LPC_AD2 */
PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1) /* LPC_AD3 */
PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */
PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */
PAD_CFG_GPI(GPIO_101, NONE, DEEP) /* FST_IO2 -- MEM_CONFIG0 */
PAD_CFG_GPI(GPIO_102, NONE, DEEP) /* FST_IO3 -- MEM_CONFIG1 */
PAD_CFG_GPI(GPIO_38, NONE, DEEP) /* LPSS_UART0_RXD - MEM_CONFIG2*/
PAD_CFG_GPI(GPIO_45, NONE, DEEP) /* LPSS_UART1_CTS - MEM_CONFIG3 */
>;
};
&fsp_m {
fspm,package = <PACKAGE_BGA>;
fspm,profile = <PROFILE_LPDDR4_2400_24_22_22>;
fspm,memory-down = <MEMORY_DOWN_YES>;
fspm,scrambler-support = <1>;
fspm,interleaved-mode = <INTERLEAVED_MODE_ENABLE>;
fspm,channel-hash-mask = <0x36>;
fspm,slice-hash-mask = <0x9>;
fspm,dual-rank-support-enable = <1>;
fspm,low-memory-max-value = <2048>;
fspm,ch0-rank-enable = <1>;
fspm,ch0-device-width = <CHX_DEVICE_WIDTH_X16>;
fspm,ch0-dram-density = <CHX_DEVICE_DENSITY_8GB>;
fspm,ch0-option = <(CHX_OPTION_RANK_INTERLEAVING |
CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
fspm,ch0-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
fspm,ch1-rank-enable = <1>;
fspm,ch1-device-width = <CHX_DEVICE_WIDTH_X16>;
fspm,ch1-dram-density = <CHX_DEVICE_DENSITY_8GB>;
fspm,ch1-option = <(CHX_OPTION_RANK_INTERLEAVING |
CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
fspm,ch1-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
fspm,ch2-rank-enable = <1>;
fspm,ch2-device-width = <CHX_DEVICE_WIDTH_X16>;
fspm,ch2-dram-density = <CHX_DEVICE_DENSITY_8GB>;
fspm,ch2-option = <(CHX_OPTION_RANK_INTERLEAVING |
CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
fspm,ch2-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
fspm,ch3-rank-enable = <1>;
fspm,ch3-device-width = <CHX_DEVICE_WIDTH_X16>;
fspm,ch3-dram-density = <CHX_DEVICE_DENSITY_8GB>;
fspm,ch3-option = <(CHX_OPTION_RANK_INTERLEAVING |
CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>;
fspm,ch3-odt-config = <CHX_ODT_CONFIG_DDR4_CA_ODT>;
fspm,fspm,skip-cse-rbp = <1>;
fspm,ch-bit-swizzling = /bits/ 8 <
/* LP4_PHYS_CH0A */
/* DQA[0:7] pins of LPDDR4 module */
6 7 5 4 3 1 0 2
/* DQA[8:15] pins of LPDDR4 module */
12 10 11 13 14 8 9 15
/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
16 22 23 20 18 17 19 21
/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
30 28 29 25 24 26 27 31
/* LP4_PHYS_CH0B */
/* DQA[0:7] pins of LPDDR4 module */
7 3 5 2 6 0 1 4
/* DQA[8:15] pins of LPDDR4 module */
9 14 12 13 10 11 8 15
/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
20 22 23 16 19 17 18 21
/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
28 24 26 27 29 30 31 25
/* LP4_PHYS_CH1A */
/* DQA[0:7] pins of LPDDR4 module */
2 1 6 7 5 4 3 0
/* DQA[8:15] pins of LPDDR4 module */
11 10 8 9 12 15 13 14
/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
17 23 19 16 21 22 20 18
/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
31 29 26 25 28 27 24 30
/* LP4_PHYS_CH1B */
/* DQA[0:7] pins of LPDDR4 module */
4 3 7 5 6 1 0 2
/* DQA[8:15] pins of LPDDR4 module */
15 9 8 11 14 13 12 10
/* DQB[0:7] pins of LPDDR4 module with offset of 16 */
20 23 22 21 18 19 16 17
/* DQB[7:15] pins of LPDDR4 module with offset of 16 */
25 28 30 31 26 27 24 29>;
fspm,dimm0-spd-address = <0>;
fspm,dimm1-spd-address = <0>;
fspm,skip-cse-rbp = <1>;
fspm,enable-s3-heci2 = <0>;
};
&fsp_s {
u-boot,dm-pre-proper;
fsps,ish-enable = <0>;
fsps,enable-sata = <0>;
fsps,i2c6-enable = <I2CX_ENABLE_DISABLED>;
fsps,i2c7-enable = <I2CX_ENABLE_DISABLED>;
fsps,hsuart3-enable = <HSUARTX_ENABLE_DISABLED>;
fsps,spi1-enable = <SPIX_ENABLE_DISABLED>;
fsps,spi2-enable = <SPIX_ENABLE_DISABLED>;
fsps,sdio-enabled = <0>;
/* Disable unused clkreq of PCIe root ports */
fsps,pcie-rp-clk-req-number = /bits/ 8 <0 /* wifi/bt */
CLKREQ_DISABLED
CLKREQ_DISABLED
CLKREQ_DISABLED
CLKREQ_DISABLED
CLKREQ_DISABLED>;
/*
* GPIO for PERST_0
* If the Board has PERST_0 signal, assign the GPIO
* If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
*
* This are not used yet, so comment them out for now.
*
* prt0-gpio = <GPIO_122>;
*
* GPIO for SD card detect
* sdcard-cd-gpio = <GPIO_177>;
*/
/*
* Order is emmc-tx-data-cntl1, emmc-tx-data-cntl2,
* emmc-rx-cmd-data-cntl1, emmc-rx-cmd-data-cntl2
*
* EMMC TX DATA Delay 1
* Refer to EDS-Vol2-22.3
* [14:8] steps of delay for HS400, each 125ps
* [6:0] steps of delay for SDR104/HS200, each 125ps
*/
/*
* EMMC TX DATA Delay 2
* Refer to EDS-Vol2-22.3.
* [30:24] steps of delay for SDR50, each 125ps
* [22:16] steps of delay for DDR50, each 125ps
* [14:8] steps of delay for SDR25/HS50, each 125ps
* [6:0] steps of delay for SDR12, each 125ps
*/
/*
* EMMC RX CMD/DATA Delay 1
* Refer to EDS-Vol2-22.3.
* [30:24] steps of delay for SDR50, each 125ps
* [22:16] steps of delay for DDR50, each 125ps
* [14:8] steps of delay for SDR25/HS50, each 125ps
* [6:0] steps of delay for SDR12, each 125ps
*/
/*
* EMMC RX CMD/DATA Delay 2
* Refer to EDS-Vol2-22.3.
* [17:16] stands for Rx Clock before Output Buffer
* [14:8] steps of delay for Auto Tuning Mode, each 125ps
* [6:0] steps of delay for HS200, each 125ps
*/
/* Enable DPTF */
fsps,dptf-enabled;
fsps,emmc-tx-data-cntl1 = <0x0c16>;
fsps,emmc-tx-data-cntl2 = <0x28162828>;
fsps,emmc-rx-cmd-data-cntl1 = <0x00181717>;
fsps,emmc-rx-cmd-data-cntl2 = <0x10008>;
/* Enable Audio Clock and Power gating */
fsps,hd-audio-clk-gate = <1>;
fsps,hd-audio-pwr-gate = <1>;
fsps,bios-cfg-lock-down = <1>;
/* Enable WiFi */
fsps,pcie-root-port-en = [01 00 00 00 00 00];
fsps,pcie-rp-hot-plug = [00 00 00 00 00 00];
fsps,skip-mp-init = <1>;
fsps,spi-eiss = <0>;
fsps,rtc-lock = <0>;
fsps,port-usb20-per-port-pe-txi-set = [07 07 06 06 07 07 07 01];
fsps,port-usb20-per-port-txi-set = [00 02 00 00 00 00 00 03];
fsps,lpss-s0ix-enable = <1>;
fsps,usb-otg = <0>;
fsps,monitor-mwait-enable = <0>;
/*
* TODO(sjg@chromium.org): Move this to the I2C nodes
* Intel Common SoC Config
*+-------------------+---------------------------+
*| Field | Value |
*+-------------------+---------------------------+
*| I2C0 | Audio |
*| I2C2 | TPM |
*| I2C3 | Touchscreen |
*| I2C4 | Trackpad |
*| I2C5 | Digitizer |
*+-------------------+---------------------------+
*
common_soc_config" = "{
.i2c[0] = {
.speed = I2C_SPEED_FAST,
.rise-time-ns = 104,
.fall-time-ns = 52,
},
.i2c[2] = {
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise-time-ns = 57,
.fall-time-ns = 28,
},
.i2c[3] = {
.speed = I2C_SPEED_FAST,
.rise-time-ns = 76,
.fall-time-ns = 164,
},
.i2c[4] = {
.speed = I2C_SPEED_FAST,
.rise-time-ns = 114,
.fall-time-ns = 164,
.data_hold_time_ns = 350,
},
.i2c[5] = {
.speed = I2C_SPEED_FAST,
.rise-time-ns = 152,
.fall-time-ns = 30,
},
}"
*/
/* Minimum SLP S3 assertion width 28ms */
slp-s3-assertion-width-usecs = <28000>;
pads = <
/* PCIE_WAKE[0:3]_N */
PAD_CFG_GPI_SCI_LOW(GPIO_205, UP_20K, DEEP, EDGE_SINGLE) /* WLAN */
PAD_CFG_GPI(GPIO_206, UP_20K, DEEP) /* Unused */
PAD_CFG_GPI(GPIO_207, UP_20K, DEEP) /* Unused */
PAD_CFG_GPI(GPIO_208, UP_20K, DEEP) /* Unused */
/* EMMC interface */
PAD_CFG_NF(GPIO_156, DN_20K, DEEP, NF1) /* EMMC_CLK */
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_157, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D0 */
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_158, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D1 */
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_159, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D2 */
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_160, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D3 */
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_161, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D4 */
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_162, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D5 */
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_163, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D6 */
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_164, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_D7 */
PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_165, UP_20K, DEEP, NF1, HIZCRX1, DISPUPD) /* EMMC_CMD */
PAD_CFG_NF(GPIO_182, DN_20K, DEEP, NF1) /* EMMC_RCLK */
/* SDIO -- unused */
PAD_CFG_GPI(GPIO_166, UP_20K, DEEP) /* SDIO_CLK */
PAD_CFG_GPI(GPIO_167, UP_20K, DEEP) /* SDIO_D0 */
/* Configure SDIO to enable power gating */
PAD_CFG_NF(GPIO_168, UP_20K, DEEP, NF1) /* SDIO_D1 */
PAD_CFG_GPI(GPIO_169, UP_20K, DEEP) /* SDIO_D2 */
PAD_CFG_GPI(GPIO_170, UP_20K, DEEP) /* SDIO_D3 */
PAD_CFG_GPI(GPIO_171, UP_20K, DEEP) /* SDIO_CMD */
/* SDCARD */
/* Pull down clock by 20K */
PAD_CFG_NF(GPIO_172, DN_20K, DEEP, NF1) /* SDCARD_CLK */
PAD_CFG_NF(GPIO_173, UP_20K, DEEP, NF1) /* SDCARD_D0 */
PAD_CFG_NF(GPIO_174, UP_20K, DEEP, NF1) /* SDCARD_D1 */
PAD_CFG_NF(GPIO_175, UP_20K, DEEP, NF1) /* SDCARD_D2 */
PAD_CFG_NF(GPIO_176, UP_20K, DEEP, NF1) /* SDCARD_D3 */
/* Card detect is active LOW with external pull up */
PAD_CFG_NF(GPIO_177, NONE, DEEP, NF1) /* SDCARD_CD_N */
PAD_CFG_NF(GPIO_178, UP_20K, DEEP, NF1) /* SDCARD_CMD */
/* CLK feedback, internal signal, needs 20K pull down */
PAD_CFG_NF(GPIO_179, DN_20K, DEEP, NF1) /* SDCARD_CLK_FB */
/* No h/w write proect for uSD cards, pull down by 20K */
PAD_CFG_NF(GPIO_186, DN_20K, DEEP, NF1) /* SDCARD_LVL_WP */
/* EN_SD_SOCKET_PWR_L for SD slot power control. Default on */
PAD_CFG_GPO(GPIO_183, 0, DEEP) /* SDIO_PWR_DOWN_N */
/* SMBus -- unused */
PAD_CFG_GPI(SMB_ALERTB, UP_20K, DEEP) /* SMB_ALERT _N */
PAD_CFG_GPI(SMB_CLK, UP_20K, DEEP) /* SMB_CLK */
PAD_CFG_GPI(SMB_DATA, UP_20K, DEEP) /* SMB_DATA */
/* LPC */
PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1) /* LPC_SERIRQ */
PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1) /* LPC_CLKOUT0 */
PAD_CFG_NF(LPC_CLKOUT1, UP_20K, DEEP, NF1)
PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1) /* LPC_AD0 */
PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1) /* LPC_AD1 */
PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1) /* LPC_AD2 */
PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1) /* LPC_AD3 */
PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */
PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */
/* I2C0 - Audio */
PAD_CFG_NF(GPIO_124, UP_2K, DEEP, NF1) /* LPSS_I2C0_SDA */
PAD_CFG_NF(GPIO_125, UP_2K, DEEP, NF1) /* LPSS_I2C0_SCL */
/* I2C1 - NFC with external pulls */
PAD_CFG_NF(GPIO_126, NONE, DEEP, NF1) /* LPSS_I2C1_SDA */
PAD_CFG_NF(GPIO_127, NONE, DEEP, NF1) /* LPSS_I2C1_SCL */
/* I2C2 - TPM */
PAD_CFG_NF(GPIO_128, UP_2K, DEEP, NF1) /* LPSS_I2C2_SDA */
PAD_CFG_NF(GPIO_129, UP_2K, DEEP, NF1) /* LPSS_I2C2_SCL */
/* I2C3 - touch */
PAD_CFG_NF(GPIO_130, UP_2K, DEEP, NF1) /* LPSS_I2C3_SDA */
PAD_CFG_NF(GPIO_131, UP_2K, DEEP, NF1) /* LPSS_I2C3_SCL */
/* I2C4 - trackpad */
/* LPSS_I2C4_SDA */
PAD_CFG_NF_IOSSTATE(GPIO_132, UP_2K, DEEP, NF1, HIZCRX1)
/* LPSS_I2C4_SCL */
PAD_CFG_NF_IOSSTATE(GPIO_133, UP_2K, DEEP, NF1, HIZCRX1)
/* I2C5 -- pen with external pulls */
PAD_CFG_NF(GPIO_134, NONE, DEEP, NF1) /* LPSS_I2C5_SDA */
PAD_CFG_NF(GPIO_135, NONE, DEEP, NF1) /* LPSS_I2C5_SCL */
/* I2C6-7 -- unused */
PAD_CFG_GPI(GPIO_136, UP_20K, DEEP) /* LPSS_I2C6_SDA */
PAD_CFG_GPI(GPIO_137, UP_20K, DEEP) /* LPSS_I2C6_SCL */
PAD_CFG_GPI(GPIO_138, UP_20K, DEEP) /* LPSS_I2C7_SDA */
PAD_CFG_GPI(GPIO_139, UP_20K, DEEP) /* LPSS_I2C7_SCL */
/* Audio Amp - I2S6 */
PAD_CFG_NF(GPIO_146, NATIVE, DEEP, NF2) /* ISH_GPIO_0 - I2S6_BCLK */
PAD_CFG_NF(GPIO_147, NATIVE, DEEP, NF2) /* ISH_GPIO_1 - I2S6_WS_SYNC */
PAD_CFG_GPI(GPIO_148, UP_20K, DEEP) /* ISH_GPIO_2 - unused */
PAD_CFG_NF(GPIO_149, NATIVE, DEEP, NF2) /* ISH_GPIO_3 - I2S6_SDO */
/* NFC Reset */
PAD_CFG_GPO(GPIO_150, 1, DEEP) /* ISH_GPIO_4 */
PAD_CFG_GPI(GPIO_151, UP_20K, DEEP) /* ISH_GPIO_5 - unused */
/* Touch enable */
PAD_CFG_GPO(GPIO_152, 1, DEEP) /* ISH_GPIO_6 */
PAD_CFG_GPI(GPIO_153, UP_20K, DEEP) /* ISH_GPIO_7 - unused */
PAD_CFG_GPI(GPIO_154, UP_20K, DEEP) /* ISH_GPIO_8 - unused */
PAD_CFG_GPI(GPIO_155, UP_20K, DEEP) /* ISH_GPIO_9 - unused */
/* PCIE_CLKREQ[0:3]_N */
PAD_CFG_NF(GPIO_209, NONE, DEEP, NF1) /* WLAN with external pull */
PAD_CFG_GPI(GPIO_210, UP_20K, DEEP) /* unused */
PAD_CFG_GPI(GPIO_211, UP_20K, DEEP) /* unused */
PAD_CFG_GPI(GPIO_212, UP_20K, DEEP) /* unused */
/* OSC_CLK_OUT_[0:4] -- unused */
PAD_CFG_GPI(OSC_CLK_OUT_0, UP_20K, DEEP)
PAD_CFG_GPI(OSC_CLK_OUT_1, UP_20K, DEEP)
PAD_CFG_GPI(OSC_CLK_OUT_2, UP_20K, DEEP)
PAD_CFG_GPI(OSC_CLK_OUT_3, UP_20K, DEEP)
PAD_CFG_GPI(OSC_CLK_OUT_4, UP_20K, DEEP)
/* PMU Signals */
PAD_CFG_GPI(PMU_AC_PRESENT, UP_20K, DEEP) /* PMU_AC_PRESENT - unused */
PAD_CFG_NF(PMU_BATLOW_B, UP_20K, DEEP, NF1) /* PMU_BATLOW_N */
PAD_CFG_NF(PMU_PLTRST_B, NONE, DEEP, NF1) /* PMU_PLTRST_N */
PAD_CFG_NF(PMU_PWRBTN_B, UP_20K, DEEP, NF1) /* PMU_PWRBTN_N */
PAD_CFG_NF(PMU_RESETBUTTON_B, NONE, DEEP, NF1) /* PMU_RSTBTN_N */
PAD_CFG_NF_IOSSTATE(PMU_SLP_S0_B, NONE, DEEP, NF1, IGNORE) /* PMU_SLP_S0_N */
PAD_CFG_NF(PMU_SLP_S3_B, NONE, DEEP, NF1) /* PMU_SLP_S3_N */
PAD_CFG_NF(PMU_SLP_S4_B, NONE, DEEP, NF1) /* PMU_SLP_S4_N */
PAD_CFG_NF(PMU_SUSCLK, NONE, DEEP, NF1) /* PMU_SUSCLK */
PAD_CFG_GPO(PMU_WAKE_B, 1, DEEP) /* EN_PP3300_EMMC */
PAD_CFG_NF(SUS_STAT_B, NONE, DEEP, NF1) /* SUS_STAT_N */
PAD_CFG_NF(SUSPWRDNACK, NONE, DEEP, NF1) /* SUSPWRDNACK */
/* DDI[0:1] SDA and SCL -- unused */
PAD_CFG_GPI(GPIO_187, UP_20K, DEEP) /* HV_DDI0_DDC_SDA */
PAD_CFG_GPI(GPIO_188, UP_20K, DEEP) /* HV_DDI0_DDC_SCL */
PAD_CFG_GPI(GPIO_189, UP_20K, DEEP) /* HV_DDI1_DDC_SDA */
PAD_CFG_GPI(GPIO_190, UP_20K, DEEP) /* HV_DDI1_DDC_SCL */
/* MIPI I2C -- unused */
PAD_CFG_GPI(GPIO_191, UP_20K, DEEP) /* MIPI_I2C_SDA */
PAD_CFG_GPI(GPIO_192, UP_20K, DEEP) /* MIPI_I2C_SCL */
/* Panel 0 control */
PAD_CFG_NF(GPIO_193, NATIVE, DEEP, NF1) /* PNL0_VDDEN */
PAD_CFG_NF(GPIO_194, NATIVE, DEEP, NF1) /* PNL0_BKLTEN */
PAD_CFG_NF(GPIO_195, NATIVE, DEEP, NF1) /* PNL0_BKLTCTL */
/* Panel 1 control -- unused */
PAD_CFG_NF(GPIO_196, NATIVE, DEEP, NF1) /* PNL1_VDDEN */
PAD_CFG_NF(GPIO_197, NATIVE, DEEP, NF1) /* PNL1_BKLTEN */
PAD_CFG_NF(GPIO_198, NATIVE, DEEP, NF1) /* PNL1_BKLTCTL */
/* Hot plug detect */
PAD_CFG_NF(GPIO_199, UP_20K, DEEP, NF2) /* HV_DDI1_HPD */
PAD_CFG_NF(GPIO_200, UP_20K, DEEP, NF2) /* HV_DDI0_HPD */
/* MDSI signals -- unused */
PAD_CFG_GPI(GPIO_201, UP_20K, DEEP) /* MDSI_A_TE */
PAD_CFG_GPI(GPIO_202, UP_20K, DEEP) /* MDSI_A_TE */
/* USB overcurrent pins */
PAD_CFG_NF(GPIO_203, UP_20K, DEEP, NF1) /* USB_OC0_N */
PAD_CFG_NF(GPIO_204, UP_20K, DEEP, NF1) /* USB_OC1_N */
/* PMC SPI -- almost entirely unused */
PAD_CFG_GPI(PMC_SPI_FS0, UP_20K, DEEP)
PAD_CFG_NF(PMC_SPI_FS1, UP_20K, DEEP, NF2) /* HV_DDI2_HPD -- EDP HPD */
PAD_CFG_GPI(PMC_SPI_FS2, UP_20K, DEEP)
PAD_CFG_GPI(PMC_SPI_RXD, UP_20K, DEEP)
PAD_CFG_GPI(PMC_SPI_TXD, UP_20K, DEEP)
PAD_CFG_GPI(PMC_SPI_CLK, UP_20K, DEEP)
/* PMIC Signals Unused signals related to an old PMIC interface */
PAD_CFG_NF_IOSSTATE(PMIC_RESET_B, NATIVE, DEEP, NF1, IGNORE) /* PMIC_RESET_B */
PAD_CFG_GPI(GPIO_213, NONE, DEEP) /* unused external pull */
PAD_CFG_GPI(GPIO_214, UP_20K, DEEP) /* unused */
PAD_CFG_GPI(GPIO_215, UP_20K, DEEP) /* unused */
PAD_CFG_NF(PMIC_THERMTRIP_B, UP_20K, DEEP, NF1) /* THERMTRIP_N */
PAD_CFG_GPI(PMIC_STDBY, UP_20K, DEEP) /* unused */
PAD_CFG_NF(PROCHOT_B, UP_20K, DEEP, NF1) /* PROCHOT_N */
PAD_CFG_NF(PMIC_I2C_SCL, UP_1K, DEEP, NF1) /* PMIC_I2C_SCL */
PAD_CFG_NF(PMIC_I2C_SDA, UP_1K, DEEP, NF1) /* PMIC_I2C_SDA */
/* I2S1 -- largely unused */
PAD_CFG_GPI(GPIO_74, UP_20K, DEEP) /* I2S1_MCLK */
PAD_CFG_GPI(GPIO_75, UP_20K, DEEP) /* I2S1_BCLK -- PCH_WP */
PAD_CFG_GPO(GPIO_76, 0, DEEP) /* I2S1_WS_SYNC -- SPK_PA_EN */
PAD_CFG_GPI(GPIO_77, UP_20K, DEEP) /* I2S1_SDI */
PAD_CFG_GPO(GPIO_78, 1, DEEP) /* I2S1_SDO -- EN_PP3300_DX_LTE_SOC */
/* DMIC or I2S4 */
/* AVS_DMIC_CLK_A1 */
PAD_CFG_NF_IOSSTATE(GPIO_79, NATIVE, DEEP, NF1, IGNORE)
PAD_CFG_NF(GPIO_80, NATIVE, DEEP, NF1) /* AVS_DMIC_CLK_B1 */
PAD_CFG_NF(GPIO_81, NATIVE, DEEP, NF1) /* AVS_DMIC_DATA_1 */
PAD_CFG_GPI(GPIO_82, DN_20K, DEEP) /* unused -- strap */
PAD_CFG_NF(GPIO_83, NATIVE, DEEP, NF1) /* AVS_DMIC_DATA_2 */
/* I2S2 -- Headset amp */
PAD_CFG_NF(GPIO_84, NATIVE, DEEP, NF1) /* AVS_I2S2_MCLK */
PAD_CFG_NF(GPIO_85, NATIVE, DEEP, NF1) /* AVS_I2S2_BCLK */
PAD_CFG_NF(GPIO_86, NATIVE, DEEP, NF1) /* AVS_I2S2_SW_SYNC */
PAD_CFG_NF(GPIO_87, NATIVE, DEEP, NF1) /* AVS_I2S2_SDI */
PAD_CFG_NF(GPIO_88, NATIVE, DEEP, NF1) /* AVS_I2S2_SDO */
/* I2S3 -- largely unused */
PAD_CFG_GPI(GPIO_89, UP_20K, DEEP) /* unused */
PAD_CFG_GPI(GPIO_90, UP_20K, DEEP) /* GPS_HOST_WAKE */
PAD_CFG_GPO(GPIO_91, 1, DEEP) /* GPS_EN */
PAD_CFG_GPI(GPIO_92, DN_20K, DEEP) /* unused -- strap */
/* Fast SPI */
PAD_CFG_NF_IOSSTATE(GPIO_97, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CS0_B */
PAD_CFG_GPI(GPIO_98, UP_20K, DEEP) /* FST_SPI_CS1_B -- unused */
PAD_CFG_NF_IOSSTATE(GPIO_99, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_MOSI_IO0 */
PAD_CFG_NF_IOSSTATE(GPIO_100, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_MISO_IO1 */
PAD_CFG_GPI(GPIO_101, NONE, DEEP) /* FST_IO2 -- MEM_CONFIG0 */
PAD_CFG_GPI(GPIO_102, NONE, DEEP) /* FST_IO3 -- MEM_CONFIG1 */
PAD_CFG_NF_IOSSTATE(GPIO_103, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CLK */
PAD_CFG_NF_IOSSTATE(FST_SPI_CLK_FB, NATIVE, DEEP, NF1, IGNORE) /* FST_SPI_CLK_FB */
PAD_CFG_NF_IOSSTATE(GPIO_106, NATIVE, DEEP, NF3, IGNORE) /* FST_SPI_CS2_N */
/* SIO_SPI_0 - Used for FP */
PAD_CFG_NF(GPIO_104, NATIVE, DEEP, NF1) /* SIO_SPI_0_CLK */
PAD_CFG_NF(GPIO_105, NATIVE, DEEP, NF1) /* SIO_SPI_0_FS0 */
PAD_CFG_NF(GPIO_109, NATIVE, DEEP, NF1) /* SIO_SPI_0_RXD */
PAD_CFG_NF(GPIO_110, NATIVE, DEEP, NF1) /* SIO_SPI_0_TXD */
/* SIO_SPI_1 -- largely unused */
PAD_CFG_GPI(GPIO_111, UP_20K, DEEP) /* SIO_SPI_1_CLK */
PAD_CFG_GPI(GPIO_112, UP_20K, DEEP) /* SIO_SPI_1_FS0 */
PAD_CFG_GPI(GPIO_113, UP_20K, DEEP) /* SIO_SPI_1_FS1 */
/* Headset interrupt */
PAD_CFG_GPI_APIC_LOW(GPIO_116, NONE, DEEP) /* SIO_SPI_1_RXD */
PAD_CFG_GPI(GPIO_117, UP_20K, DEEP) /* SIO_SPI_1_TXD */
/* SIO_SPI_2 -- unused */
PAD_CFG_GPI(GPIO_118, UP_20K, DEEP) /* SIO_SPI_2_CLK */
PAD_CFG_GPI(GPIO_119, UP_20K, DEEP) /* SIO_SPI_2_FS0 */
PAD_CFG_GPI(GPIO_120, UP_20K, DEEP) /* SIO_SPI_2_FS1 */
PAD_CFG_GPI(GPIO_121, UP_20K, DEEP) /* SIO_SPI_2_FS2 */
/* WLAN_PE_RST - default to deasserted */
PAD_CFG_GPO(GPIO_122, 0, DEEP) /* SIO_SPI_2_RXD */
PAD_CFG_GPI(GPIO_123, UP_20K, DEEP) /* SIO_SPI_2_TXD */
/* Debug tracing */
PAD_CFG_GPI(GPIO_0, UP_20K, DEEP)
PAD_CFG_GPI(GPIO_1, UP_20K, DEEP)
PAD_CFG_GPI(GPIO_2, UP_20K, DEEP)
PAD_CFG_GPI_SCI_HIGH(GPIO_3, DN_20K, DEEP, LEVEL) /* FP_INT */
PAD_CFG_GPI(GPIO_4, UP_20K, DEEP)
PAD_CFG_GPI(GPIO_5, UP_20K, DEEP)
PAD_CFG_GPI(GPIO_6, UP_20K, DEEP)
PAD_CFG_GPI(GPIO_7, UP_20K, DEEP)
PAD_CFG_GPI(GPIO_8, UP_20K, DEEP)
PAD_CFG_GPI_APIC_LOW(GPIO_9, NONE, DEEP) /* dTPM IRQ */
PAD_CFG_GPI(GPIO_10, DN_20K, DEEP) /* Board phase enforcement */
PAD_CFG_GPI_SCI_LOW(GPIO_11, NONE, DEEP, EDGE_SINGLE) /* EC SCI */
PAD_CFG_GPI(GPIO_12, UP_20K, DEEP) /* unused */
PAD_CFG_GPI_APIC_LOW(GPIO_13, NONE, DEEP) /* PEN_INT_ODL */
PAD_CFG_GPI_APIC_HIGH(GPIO_14, DN_20K, DEEP) /* FP_INT */
PAD_CFG_GPI_SCI_LOW(GPIO_15, NONE, DEEP, EDGE_SINGLE) /* TRACKPAD_INT_1V8_ODL */
PAD_CFG_GPI(GPIO_16, UP_20K, DEEP) /* unused */
PAD_CFG_GPI(GPIO_17, UP_20K, DEEP) /* 1 vs 4 DMIC config */
PAD_CFG_GPI_APIC_LOW(GPIO_18, NONE, DEEP) /* Trackpad IRQ */
PAD_CFG_GPI(GPIO_19, UP_20K, DEEP) /* unused */
PAD_CFG_GPI_APIC_LOW(GPIO_20, UP_20K, DEEP) /* NFC IRQ */
PAD_CFG_GPI_APIC_LOW(GPIO_21, NONE, DEEP) /* Touch IRQ */
PAD_CFG_GPI_SCI_LOW(GPIO_22, NONE, DEEP, EDGE_SINGLE) /* EC wake */
PAD_CFG_GPI(GPIO_23, UP_20K, DEEP) /* unused */
PAD_CFG_GPI(GPIO_24, NONE, DEEP) /* PEN_PDCT_ODL */
PAD_CFG_GPI(GPIO_25, UP_20K, DEEP) /* unused */
PAD_CFG_GPI(GPIO_26, UP_20K, DEEP) /* unused */
PAD_CFG_GPI(GPIO_27, UP_20K, DEEP) /* unused */
PAD_CFG_GPI_APIC_LOW(GPIO_28, NONE, DEEP) /* TPM IRQ */
PAD_CFG_GPO(GPIO_29, 1, DEEP) /* FP reset */
PAD_CFG_GPI_APIC_LOW(GPIO_30, NONE, DEEP) /* KB IRQ */
PAD_CFG_GPO(GPIO_31, 0, DEEP) /* NFC FW DL */
PAD_CFG_NF(GPIO_32, NONE, DEEP, NF5) /* SUS_CLK2 */
PAD_CFG_GPI_APIC_LOW(GPIO_33, NONE, DEEP) /* PMIC IRQ */
PAD_CFG_GPI(GPIO_34, UP_20K, DEEP) /* unused */
PAD_CFG_GPO(GPIO_35, 0, DEEP) /* PEN_RESET - active high */
PAD_CFG_GPO(GPIO_36, 0, DEEP) /* touch reset */
PAD_CFG_GPI(GPIO_37, UP_20K, DEEP) /* unused */
/* LPSS_UART[0:2] */
PAD_CFG_GPI(GPIO_38, NONE, DEEP) /* LPSS_UART0_RXD - MEM_CONFIG2*/
/* Next 2 are straps */
PAD_CFG_GPI(GPIO_39, DN_20K, DEEP) /* LPSS_UART0_TXD - unused */
PAD_CFG_GPI(GPIO_40, DN_20K, DEEP) /* LPSS_UART0_RTS - unused */
PAD_CFG_GPI(GPIO_41, NONE, DEEP) /* LPSS_UART0_CTS - EC_IN_RW */
PAD_CFG_NF(GPIO_42, NATIVE, DEEP, NF1) /* LPSS_UART1_RXD */
PAD_CFG_NF(GPIO_43, NATIVE, DEEP, NF1) /* LPSS_UART1_TXD */
PAD_CFG_GPO(GPIO_44, 1, DEEP) /* GPS_RST_ODL */
PAD_CFG_GPI(GPIO_45, NONE, DEEP) /* LPSS_UART1_CTS - MEM_CONFIG3 */
PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1) /* LPSS_UART2_RXD */
PAD_CFG_NF_IOSSTATE(GPIO_47, NATIVE, DEEP, NF1, TX1_RX_DCR_X0) /* UART2 TX */
PAD_CFG_GPI(GPIO_48, UP_20K, DEEP) /* LPSS_UART2_RTS - unused */
PAD_CFG_GPI_SMI_LOW(GPIO_49, NONE, DEEP, EDGE_SINGLE) /* LPSS_UART2_CTS - EC_SMI_L */
/* Camera interface -- completely unused */
PAD_CFG_GPI(GPIO_62, UP_20K, DEEP) /* GP_CAMERASB00 */
PAD_CFG_GPI(GPIO_63, UP_20K, DEEP) /* GP_CAMERASB01 */
PAD_CFG_GPI(GPIO_64, UP_20K, DEEP) /* GP_CAMERASB02 */
PAD_CFG_GPI(GPIO_65, UP_20K, DEEP) /* GP_CAMERASB03 */
PAD_CFG_GPI(GPIO_66, UP_20K, DEEP) /* GP_CAMERASB04 */
PAD_CFG_GPI(GPIO_67, UP_20K, DEEP) /* GP_CAMERASB05 */
PAD_CFG_GPI(GPIO_68, UP_20K, DEEP) /* GP_CAMERASB06 */
PAD_CFG_GPI(GPIO_69, UP_20K, DEEP) /* GP_CAMERASB07 */
PAD_CFG_GPI(GPIO_70, UP_20K, DEEP) /* GP_CAMERASB08 */
PAD_CFG_GPI(GPIO_71, UP_20K, DEEP) /* GP_CAMERASB09 */
PAD_CFG_GPI(GPIO_72, UP_20K, DEEP) /* GP_CAMERASB10 */
PAD_CFG_GPI(GPIO_73, UP_20K, DEEP) /* GP_CAMERASB11 */
>;
};
&rtc {
#address-cells = <1>;
#size-cells = <0>;
u-boot,dm-pre-proper;
};
Reference in a new issue View git blame Copy permalink