mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
aaaa1be8f0
Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
421 lines
8.9 KiB
ArmAsm
421 lines
8.9 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2014-2015 Freescale Semiconductor
|
|
* Copyright 2019-2022 NXP
|
|
*
|
|
* Extracted from armv8/start.S
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/gic.h>
|
|
#include <asm/macro.h>
|
|
#include <asm/arch-fsl-layerscape/soc.h>
|
|
#ifdef CONFIG_FSL_LSCH3
|
|
#include <asm/arch-fsl-layerscape/immap_lsch3.h>
|
|
#endif
|
|
#include <asm/u-boot.h>
|
|
|
|
.align 3
|
|
.weak secondary_boot_addr
|
|
secondary_boot_addr:
|
|
.quad 0
|
|
|
|
/* Get GIC offset
|
|
* For LS1043a rev1.0, GIC base address align with 4k.
|
|
* For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT]
|
|
* is set, GIC base address align with 4K, or else align
|
|
* with 64k.
|
|
* output:
|
|
* x0: the base address of GICD
|
|
* x1: the base address of GICC
|
|
*/
|
|
ENTRY(get_gic_offset)
|
|
ldr x0, =GICD_BASE
|
|
#ifdef CONFIG_GICV2
|
|
ldr x1, =GICC_BASE
|
|
#endif
|
|
#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
|
|
ldr x2, =DCFG_CCSR_SVR
|
|
ldr w2, [x2]
|
|
rev w2, w2
|
|
lsr w3, w2, #16
|
|
ldr w4, =SVR_DEV(SVR_LS1043A)
|
|
cmp w3, w4
|
|
b.ne 1f
|
|
ands w2, w2, #0xff
|
|
cmp w2, #REV1_0
|
|
b.eq 1f
|
|
ldr x2, =SCFG_GIC400_ALIGN
|
|
ldr w2, [x2]
|
|
rev w2, w2
|
|
tbnz w2, #GIC_ADDR_BIT, 1f
|
|
ldr x0, =GICD_BASE_64K
|
|
#ifdef CONFIG_GICV2
|
|
ldr x1, =GICC_BASE_64K
|
|
#endif
|
|
1:
|
|
#endif
|
|
ret
|
|
ENDPROC(get_gic_offset)
|
|
|
|
ENTRY(smp_kick_all_cpus)
|
|
/* Kick secondary cpus up by SGI 0 interrupt */
|
|
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
|
|
mov x29, lr /* Save LR */
|
|
bl get_gic_offset
|
|
bl gic_kick_secondary_cpus
|
|
mov lr, x29 /* Restore LR */
|
|
#endif
|
|
ret
|
|
ENDPROC(smp_kick_all_cpus)
|
|
|
|
|
|
ENTRY(lowlevel_init)
|
|
mov x29, lr /* Save LR */
|
|
|
|
switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */
|
|
1:
|
|
|
|
#if defined (CONFIG_SYS_FSL_HAS_CCN504)
|
|
|
|
/* Set Wuo bit for RN-I 20 */
|
|
#ifdef CONFIG_ARCH_LS2080A
|
|
ldr x0, =CCI_AUX_CONTROL_BASE(20)
|
|
ldr x1, =0x00000010
|
|
bl ccn504_set_aux
|
|
|
|
/*
|
|
* Set forced-order mode in RNI-6, RNI-20
|
|
* This is required for performance optimization on LS2088A
|
|
* LS2080A family does not support setting forced-order mode,
|
|
* so skip this operation for LS2080A family
|
|
*/
|
|
bl get_svr
|
|
lsr w0, w0, #16
|
|
ldr w1, =SVR_DEV(SVR_LS2080A)
|
|
cmp w0, w1
|
|
b.eq 1f
|
|
|
|
ldr x0, =CCI_AUX_CONTROL_BASE(6)
|
|
ldr x1, =0x00000020
|
|
bl ccn504_set_aux
|
|
ldr x0, =CCI_AUX_CONTROL_BASE(20)
|
|
ldr x1, =0x00000020
|
|
bl ccn504_set_aux
|
|
1:
|
|
#endif
|
|
|
|
/* Add fully-coherent masters to DVM domain */
|
|
ldr x0, =CCI_MN_BASE
|
|
ldr x1, =CCI_MN_RNF_NODEID_LIST
|
|
ldr x2, =CCI_MN_DVM_DOMAIN_CTL_SET
|
|
bl ccn504_add_masters_to_dvm
|
|
|
|
/* Set all RN-I ports to QoS of 15 */
|
|
ldr x0, =CCI_S0_QOS_CONTROL_BASE(0)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S1_QOS_CONTROL_BASE(0)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S2_QOS_CONTROL_BASE(0)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
|
|
ldr x0, =CCI_S0_QOS_CONTROL_BASE(2)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S1_QOS_CONTROL_BASE(2)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S2_QOS_CONTROL_BASE(2)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
|
|
ldr x0, =CCI_S0_QOS_CONTROL_BASE(6)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S1_QOS_CONTROL_BASE(6)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S2_QOS_CONTROL_BASE(6)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
|
|
ldr x0, =CCI_S0_QOS_CONTROL_BASE(12)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S1_QOS_CONTROL_BASE(12)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S2_QOS_CONTROL_BASE(12)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
|
|
ldr x0, =CCI_S0_QOS_CONTROL_BASE(16)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S1_QOS_CONTROL_BASE(16)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S2_QOS_CONTROL_BASE(16)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
|
|
ldr x0, =CCI_S0_QOS_CONTROL_BASE(20)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S1_QOS_CONTROL_BASE(20)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
ldr x0, =CCI_S2_QOS_CONTROL_BASE(20)
|
|
ldr x1, =0x00FF000C
|
|
bl ccn504_set_qos
|
|
#endif /* CONFIG_SYS_FSL_HAS_CCN504 */
|
|
|
|
#ifdef SMMU_BASE
|
|
/* Set the SMMU page size in the sACR register */
|
|
ldr x1, =SMMU_BASE
|
|
ldr w0, [x1, #0x10]
|
|
orr w0, w0, #1 << 16 /* set sACR.pagesize to indicate 64K page */
|
|
str w0, [x1, #0x10]
|
|
#endif
|
|
|
|
/* Initialize GIC Secure Bank Status */
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
|
|
branch_if_slave x0, 1f
|
|
bl get_gic_offset
|
|
bl gic_init_secure
|
|
1:
|
|
#ifdef CONFIG_GICV3
|
|
ldr x0, =GICR_BASE
|
|
bl gic_init_secure_percpu
|
|
#elif defined(CONFIG_GICV2)
|
|
bl get_gic_offset
|
|
bl gic_init_secure_percpu
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
100:
|
|
branch_if_master x0, 2f
|
|
|
|
#if defined(CONFIG_MP) && defined(CONFIG_ARMV8_MULTIENTRY)
|
|
/*
|
|
* Formerly, here was a jump to secondary_boot_func, but we just
|
|
* return early here and let the generic code in start.S handle
|
|
* the jump to secondary_boot_func.
|
|
*/
|
|
mov lr, x29 /* Restore LR */
|
|
ret
|
|
#endif
|
|
|
|
2:
|
|
switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */
|
|
1:
|
|
#ifdef CONFIG_FSL_TZPC_BP147
|
|
/* Set Non Secure access for all devices protected via TZPC */
|
|
ldr x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */
|
|
orr w0, w0, #1 << 3 /* DCFG_RESET is accessible from NS world */
|
|
str w0, [x1]
|
|
|
|
isb
|
|
dsb sy
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_TZASC_400
|
|
/*
|
|
* LS2080 and its personalities does not support TZASC
|
|
* So skip TZASC related operations
|
|
*/
|
|
bl get_svr
|
|
lsr w0, w0, #16
|
|
ldr w1, =SVR_DEV(SVR_LS2080A)
|
|
cmp w0, w1
|
|
b.eq 1f
|
|
|
|
/* Set TZASC so that:
|
|
* a. We use only Region0 whose global secure write/read is EN
|
|
* b. We use only Region0 whose NSAID write/read is EN
|
|
*
|
|
* NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just
|
|
* placeholders.
|
|
*/
|
|
|
|
.macro tzasc_prog, xreg
|
|
|
|
mov x12, TZASC1_BASE
|
|
mov x16, #0x10000
|
|
mul x14, \xreg, x16
|
|
add x14, x14,x12
|
|
mov x1, #0x8
|
|
add x1, x1, x14
|
|
|
|
ldr w0, [x1] /* Filter 0 Gate Keeper Register */
|
|
orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */
|
|
str w0, [x1]
|
|
|
|
mov x1, #0x110
|
|
add x1, x1, x14
|
|
|
|
ldr w0, [x1] /* Region-0 Attributes Register */
|
|
orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */
|
|
orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */
|
|
str w0, [x1]
|
|
|
|
mov x1, #0x114
|
|
add x1, x1, x14
|
|
|
|
ldr w0, [x1] /* Region-0 Access Register */
|
|
mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
|
|
str w0, [x1]
|
|
.endm
|
|
|
|
#ifdef CONFIG_FSL_TZASC_1
|
|
mov x13, #0
|
|
tzasc_prog x13
|
|
|
|
#endif
|
|
#ifdef CONFIG_FSL_TZASC_2
|
|
mov x13, #1
|
|
tzasc_prog x13
|
|
|
|
#endif
|
|
isb
|
|
dsb sy
|
|
#endif
|
|
100:
|
|
1:
|
|
#ifdef CONFIG_ARCH_LS1046A
|
|
switch_el x1, 1f, 100f, 100f /* skip if not in EL3 */
|
|
1:
|
|
/* Initialize the L2 RAM latency */
|
|
mrs x1, S3_1_c11_c0_2
|
|
mov x0, #0x1C7
|
|
/* Clear L2 Tag RAM latency and L2 Data RAM latency */
|
|
bic x1, x1, x0
|
|
/* Set L2 data ram latency bits [2:0] */
|
|
orr x1, x1, #0x2
|
|
/* set L2 tag ram latency bits [8:6] */
|
|
orr x1, x1, #0x80
|
|
msr S3_1_c11_c0_2, x1
|
|
isb
|
|
100:
|
|
#endif
|
|
|
|
#if !defined(CONFIG_TFABOOT) && \
|
|
(defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD))
|
|
bl fsl_ocram_init
|
|
#endif
|
|
|
|
mov lr, x29 /* Restore LR */
|
|
ret
|
|
ENDPROC(lowlevel_init)
|
|
|
|
#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)
|
|
ENTRY(fsl_ocram_init)
|
|
mov x28, lr /* Save LR */
|
|
bl fsl_clear_ocram
|
|
bl fsl_ocram_clear_ecc_err
|
|
mov lr, x28 /* Restore LR */
|
|
ret
|
|
ENDPROC(fsl_ocram_init)
|
|
|
|
ENTRY(fsl_clear_ocram)
|
|
/* Clear OCRAM */
|
|
ldr x0, =CONFIG_SYS_FSL_OCRAM_BASE
|
|
ldr x1, =(CONFIG_SYS_FSL_OCRAM_BASE + CONFIG_SYS_FSL_OCRAM_SIZE)
|
|
mov x2, #0
|
|
clear_loop:
|
|
str x2, [x0]
|
|
add x0, x0, #8
|
|
cmp x0, x1
|
|
b.lo clear_loop
|
|
ret
|
|
ENDPROC(fsl_clear_ocram)
|
|
|
|
ENTRY(fsl_ocram_clear_ecc_err)
|
|
/* OCRAM1/2 ECC status bit */
|
|
mov w1, #0x60
|
|
ldr x0, =DCSR_DCFG_SBEESR2
|
|
str w1, [x0]
|
|
ldr x0, =DCSR_DCFG_MBEESR2
|
|
str w1, [x0]
|
|
ret
|
|
ENDPROC(fsl_ocram_clear_ecc_err)
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_LSCH3
|
|
.globl get_svr
|
|
get_svr:
|
|
ldr x1, =FSL_LSCH3_SVR
|
|
ldr w0, [x1]
|
|
ret
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_FSL_HAS_CCN504) || defined(CONFIG_SYS_FSL_HAS_CCN508)
|
|
hnf_pstate_poll:
|
|
/* x0 has the desired status, return only if operation succeed
|
|
* clobber x1, x2, x6
|
|
*/
|
|
mov x1, x0
|
|
mov w6, #8 /* HN-F node count */
|
|
mov x0, #0x18
|
|
movk x0, #0x420, lsl #16 /* HNF0_PSTATE_STATUS */
|
|
1:
|
|
ldr x2, [x0]
|
|
cmp x2, x1 /* check status */
|
|
b.eq 2f
|
|
b 1b
|
|
2:
|
|
add x0, x0, #0x10000 /* move to next node */
|
|
subs w6, w6, #1
|
|
cbnz w6, 1b
|
|
ret
|
|
|
|
hnf_set_pstate:
|
|
/* x0 has the desired state, clobber x1, x2, x6 */
|
|
mov x1, x0
|
|
/* power state to SFONLY */
|
|
mov w6, #8 /* HN-F node count */
|
|
mov x0, #0x10
|
|
movk x0, #0x420, lsl #16 /* HNF0_PSTATE_REQ */
|
|
1: /* set pstate to sfonly */
|
|
ldr x2, [x0]
|
|
and x2, x2, #0xfffffffffffffffc /* & HNFPSTAT_MASK */
|
|
orr x2, x2, x1
|
|
str x2, [x0]
|
|
add x0, x0, #0x10000 /* move to next node */
|
|
subs w6, w6, #1
|
|
cbnz w6, 1b
|
|
|
|
ret
|
|
|
|
ENTRY(__asm_flush_l3_dcache)
|
|
/*
|
|
* Return status in x0
|
|
* success 0
|
|
*/
|
|
mov x29, lr
|
|
|
|
dsb sy
|
|
mov x0, #0x1 /* HNFPSTAT_SFONLY */
|
|
bl hnf_set_pstate
|
|
|
|
mov x0, #0x4 /* SFONLY status */
|
|
bl hnf_pstate_poll
|
|
|
|
dsb sy
|
|
mov x0, #0x3 /* HNFPSTAT_FAM */
|
|
bl hnf_set_pstate
|
|
|
|
mov x0, #0xc /* FAM status */
|
|
bl hnf_pstate_poll
|
|
|
|
mov x0, #0
|
|
mov lr, x29
|
|
ret
|
|
ENDPROC(__asm_flush_l3_dcache)
|
|
#endif /* CONFIG_SYS_FSL_HAS_CCN504 */
|