mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-20 03:38:43 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
130 lines
2.8 KiB
C
130 lines
2.8 KiB
C
/*
|
|
* Copyright (c) 2009 Wind River Systems, Inc.
|
|
* Tom Rix <Tom.Rix@windriver.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* This file was adapted from arch/powerpc/cpu/mpc5xxx/serial.c
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <serial.h>
|
|
#include <ns16550.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include "zoom2_serial.h"
|
|
|
|
int quad_init_dev (unsigned long base)
|
|
{
|
|
/*
|
|
* The Quad UART is on the debug board.
|
|
* Check if the debug board is attached before using the UART
|
|
*/
|
|
if (zoom2_debug_board_connected ()) {
|
|
NS16550_t com_port = (NS16550_t) base;
|
|
int baud_divisor = CONFIG_SYS_NS16550_CLK / 16 /
|
|
CONFIG_BAUDRATE;
|
|
|
|
/*
|
|
* Zoom2 has a board specific initialization of its UART.
|
|
* This generic initialization has been copied from
|
|
* drivers/serial/ns16550.c. The macros have been expanded.
|
|
*
|
|
* Do the following instead of
|
|
*
|
|
* NS16550_init (com_port, clock_divisor);
|
|
*/
|
|
com_port->ier = 0x00;
|
|
|
|
/*
|
|
* On Zoom2 board Set pre-scalar to 1
|
|
* CLKSEL is GND => MCR[7] is 1 => preslr is 4
|
|
* So change the prescl to 1
|
|
*/
|
|
com_port->lcr = 0xBF;
|
|
com_port->fcr |= 0x10;
|
|
com_port->mcr &= 0x7F;
|
|
|
|
/* This is generic ns16550.c setup */
|
|
com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
|
|
com_port->dll = 0;
|
|
com_port->dlm = 0;
|
|
com_port->lcr = UART_LCR_8N1;
|
|
com_port->mcr = UART_MCR_DTR | UART_MCR_RTS;
|
|
com_port->fcr = UART_FCR_FIFO_EN | UART_FCR_RXSR |
|
|
UART_FCR_TXSR;
|
|
com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
|
|
com_port->dll = baud_divisor & 0xff;
|
|
com_port->dlm = (baud_divisor >> 8) & 0xff;
|
|
com_port->lcr = UART_LCR_8N1;
|
|
}
|
|
/*
|
|
* We have to lie here, otherwise the board init code will hang
|
|
* on the check
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
void quad_putc_dev (unsigned long base, const char c)
|
|
{
|
|
if (zoom2_debug_board_connected ()) {
|
|
|
|
if (c == '\n')
|
|
quad_putc_dev (base, '\r');
|
|
|
|
NS16550_putc ((NS16550_t) base, c);
|
|
} else {
|
|
usbtty_putc(c);
|
|
}
|
|
}
|
|
|
|
void quad_puts_dev (unsigned long base, const char *s)
|
|
{
|
|
if (zoom2_debug_board_connected ()) {
|
|
while ((s != NULL) && (*s != '\0'))
|
|
quad_putc_dev (base, *s++);
|
|
} else {
|
|
usbtty_puts(s);
|
|
}
|
|
}
|
|
|
|
int quad_getc_dev (unsigned long base)
|
|
{
|
|
if (zoom2_debug_board_connected ())
|
|
return NS16550_getc ((NS16550_t) base);
|
|
|
|
return usbtty_getc();
|
|
}
|
|
|
|
int quad_tstc_dev (unsigned long base)
|
|
{
|
|
if (zoom2_debug_board_connected ())
|
|
return NS16550_tstc ((NS16550_t) base);
|
|
|
|
return usbtty_tstc();
|
|
}
|
|
|
|
void quad_setbrg_dev (unsigned long base)
|
|
{
|
|
if (zoom2_debug_board_connected ()) {
|
|
|
|
int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 /
|
|
CONFIG_BAUDRATE;
|
|
|
|
NS16550_reinit ((NS16550_t) base, clock_divisor);
|
|
}
|
|
}
|
|
|
|
QUAD_INIT (0)
|
|
QUAD_INIT (1)
|
|
QUAD_INIT (2)
|
|
QUAD_INIT (3)
|
|
|
|
struct serial_device *default_serial_console(void)
|
|
{
|
|
switch (ZOOM2_DEFAULT_SERIAL_DEVICE) {
|
|
case 0: return &zoom2_serial_device0;
|
|
case 1: return &zoom2_serial_device1;
|
|
case 2: return &zoom2_serial_device2;
|
|
case 3: return &zoom2_serial_device3;
|
|
}
|
|
}
|