mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
d1998a9fde
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
1167 lines
29 KiB
C
1167 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* QE UEC ethernet controller driver
|
|
*
|
|
* based on drivers/qe/uec.c from NXP
|
|
*
|
|
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <memalign.h>
|
|
#include <miiphy.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "dm_qe_uec.h"
|
|
|
|
#define QE_UEC_DRIVER_NAME "ucc_geth"
|
|
|
|
/* Default UTBIPAR SMI address */
|
|
#ifndef CONFIG_UTBIPAR_INIT_TBIPA
|
|
#define CONFIG_UTBIPAR_INIT_TBIPA 0x1F
|
|
#endif
|
|
|
|
static int uec_mac_enable(struct uec_priv *uec, comm_dir_e mode)
|
|
{
|
|
uec_t *uec_regs;
|
|
u32 maccfg1;
|
|
|
|
uec_regs = uec->uec_regs;
|
|
maccfg1 = in_be32(&uec_regs->maccfg1);
|
|
|
|
if (mode & COMM_DIR_TX) {
|
|
maccfg1 |= MACCFG1_ENABLE_TX;
|
|
out_be32(&uec_regs->maccfg1, maccfg1);
|
|
uec->mac_tx_enabled = 1;
|
|
}
|
|
|
|
if (mode & COMM_DIR_RX) {
|
|
maccfg1 |= MACCFG1_ENABLE_RX;
|
|
out_be32(&uec_regs->maccfg1, maccfg1);
|
|
uec->mac_rx_enabled = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_mac_disable(struct uec_priv *uec, comm_dir_e mode)
|
|
{
|
|
uec_t *uec_regs;
|
|
u32 maccfg1;
|
|
|
|
uec_regs = uec->uec_regs;
|
|
maccfg1 = in_be32(&uec_regs->maccfg1);
|
|
|
|
if (mode & COMM_DIR_TX) {
|
|
maccfg1 &= ~MACCFG1_ENABLE_TX;
|
|
out_be32(&uec_regs->maccfg1, maccfg1);
|
|
uec->mac_tx_enabled = 0;
|
|
}
|
|
|
|
if (mode & COMM_DIR_RX) {
|
|
maccfg1 &= ~MACCFG1_ENABLE_RX;
|
|
out_be32(&uec_regs->maccfg1, maccfg1);
|
|
uec->mac_rx_enabled = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_restart_tx(struct uec_priv *uec)
|
|
{
|
|
struct uec_inf *ui = uec->uec_info;
|
|
u32 cecr_subblock;
|
|
|
|
cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num);
|
|
qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
|
|
(u8)QE_CR_PROTOCOL_ETHERNET, 0);
|
|
|
|
uec->grace_stopped_tx = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_restart_rx(struct uec_priv *uec)
|
|
{
|
|
struct uec_inf *ui = uec->uec_info;
|
|
u32 cecr_subblock;
|
|
|
|
cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num);
|
|
qe_issue_cmd(QE_RESTART_RX, cecr_subblock,
|
|
(u8)QE_CR_PROTOCOL_ETHERNET, 0);
|
|
|
|
uec->grace_stopped_rx = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_open(struct uec_priv *uec, comm_dir_e mode)
|
|
{
|
|
struct ucc_fast_priv *uccf;
|
|
|
|
uccf = uec->uccf;
|
|
|
|
/* check if the UCC number is in range. */
|
|
if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
|
|
printf("%s: ucc_num out of range.\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Enable MAC */
|
|
uec_mac_enable(uec, mode);
|
|
|
|
/* Enable UCC fast */
|
|
ucc_fast_enable(uccf, mode);
|
|
|
|
/* RISC microcode start */
|
|
if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx)
|
|
uec_restart_tx(uec);
|
|
|
|
if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx)
|
|
uec_restart_rx(uec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_set_mac_if_mode(struct uec_priv *uec)
|
|
{
|
|
struct uec_inf *uec_info = uec->uec_info;
|
|
phy_interface_t enet_if_mode;
|
|
uec_t *uec_regs;
|
|
u32 upsmr;
|
|
u32 maccfg2;
|
|
|
|
uec_regs = uec->uec_regs;
|
|
enet_if_mode = uec_info->enet_interface_type;
|
|
|
|
maccfg2 = in_be32(&uec_regs->maccfg2);
|
|
maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK;
|
|
|
|
upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
|
|
upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
|
|
|
|
switch (uec_info->speed) {
|
|
case SPEED_10:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
|
|
switch (enet_if_mode) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
upsmr |= (UPSMR_RPM | UPSMR_R10M);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
upsmr |= (UPSMR_R10M | UPSMR_RMM);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case SPEED_100:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
|
|
switch (enet_if_mode) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
upsmr |= UPSMR_RPM;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
upsmr |= UPSMR_RMM;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case SPEED_1000:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
|
|
switch (enet_if_mode) {
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
break;
|
|
case PHY_INTERFACE_MODE_TBI:
|
|
upsmr |= UPSMR_TBIM;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RTBI:
|
|
upsmr |= (UPSMR_RPM | UPSMR_TBIM);
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
upsmr |= UPSMR_RPM;
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
upsmr |= UPSMR_SGMM;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
out_be32(&uec_regs->maccfg2, maccfg2);
|
|
out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qe_uec_start(struct udevice *dev)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
struct uec_priv *uec = priv->uec;
|
|
struct phy_device *phydev = priv->phydev;
|
|
struct uec_inf *uec_info = uec->uec_info;
|
|
int err;
|
|
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
/* Setup MAC interface mode */
|
|
genphy_update_link(phydev);
|
|
genphy_parse_link(phydev);
|
|
uec_info->speed = phydev->speed;
|
|
uec_set_mac_if_mode(uec);
|
|
|
|
err = uec_open(uec, COMM_DIR_RX_AND_TX);
|
|
if (err) {
|
|
printf("%s: cannot enable UEC device\n", dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return (phydev->link ? 0 : -EINVAL);
|
|
}
|
|
|
|
static int qe_uec_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
struct uec_priv *uec = priv->uec;
|
|
struct ucc_fast_priv *uccf = uec->uccf;
|
|
struct buffer_descriptor *bd;
|
|
u16 status;
|
|
int i;
|
|
int result = 0;
|
|
|
|
uccf = uec->uccf;
|
|
bd = uec->tx_bd;
|
|
|
|
/* Find an empty TxBD */
|
|
for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) {
|
|
if (i > 0x100000) {
|
|
printf("%s: tx buffer not ready\n", dev->name);
|
|
return result;
|
|
}
|
|
}
|
|
|
|
/* Init TxBD */
|
|
BD_DATA_SET(bd, packet);
|
|
BD_LENGTH_SET(bd, length);
|
|
status = BD_STATUS(bd);
|
|
status &= BD_WRAP;
|
|
status |= (TX_BD_READY | TX_BD_LAST);
|
|
BD_STATUS_SET(bd, status);
|
|
|
|
/* Tell UCC to transmit the buffer */
|
|
ucc_fast_transmit_on_demand(uccf);
|
|
|
|
/* Wait for buffer to be transmitted */
|
|
for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) {
|
|
if (i > 0x100000) {
|
|
printf("%s: tx error\n", dev->name);
|
|
return result;
|
|
}
|
|
}
|
|
|
|
/* Ok, the buffer be transimitted */
|
|
BD_ADVANCE(bd, status, uec->p_tx_bd_ring);
|
|
uec->tx_bd = bd;
|
|
result = 1;
|
|
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Receive frame:
|
|
* - wait for the next BD to get ready bit set
|
|
* - clean up the descriptor
|
|
* - move on and indicate to HW that the cleaned BD is available for Rx
|
|
*/
|
|
static int qe_uec_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
struct uec_priv *uec = priv->uec;
|
|
struct buffer_descriptor *bd;
|
|
u16 status;
|
|
u16 len = 0;
|
|
u8 *data;
|
|
|
|
*packetp = memalign(ARCH_DMA_MINALIGN, MAX_RXBUF_LEN);
|
|
if (*packetp == 0) {
|
|
printf("%s: error allocating packetp\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bd = uec->rx_bd;
|
|
status = BD_STATUS(bd);
|
|
|
|
while (!(status & RX_BD_EMPTY)) {
|
|
if (!(status & RX_BD_ERROR)) {
|
|
data = BD_DATA(bd);
|
|
len = BD_LENGTH(bd);
|
|
memcpy(*packetp, (char *)data, len);
|
|
} else {
|
|
printf("%s: Rx error\n", dev->name);
|
|
}
|
|
status &= BD_CLEAN;
|
|
BD_LENGTH_SET(bd, 0);
|
|
BD_STATUS_SET(bd, status | RX_BD_EMPTY);
|
|
BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
|
|
status = BD_STATUS(bd);
|
|
}
|
|
uec->rx_bd = bd;
|
|
|
|
return len;
|
|
}
|
|
|
|
static int uec_graceful_stop_tx(struct uec_priv *uec)
|
|
{
|
|
ucc_fast_t *uf_regs;
|
|
u32 cecr_subblock;
|
|
u32 ucce;
|
|
|
|
uf_regs = uec->uccf->uf_regs;
|
|
|
|
/* Clear the grace stop event */
|
|
out_be32(&uf_regs->ucce, UCCE_GRA);
|
|
|
|
/* Issue host command */
|
|
cecr_subblock =
|
|
ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
|
|
qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
|
|
(u8)QE_CR_PROTOCOL_ETHERNET, 0);
|
|
|
|
/* Wait for command to complete */
|
|
do {
|
|
ucce = in_be32(&uf_regs->ucce);
|
|
} while (!(ucce & UCCE_GRA));
|
|
|
|
uec->grace_stopped_tx = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_graceful_stop_rx(struct uec_priv *uec)
|
|
{
|
|
u32 cecr_subblock;
|
|
u8 ack;
|
|
|
|
if (!uec->p_rx_glbl_pram) {
|
|
printf("%s: No init rx global parameter\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Clear acknowledge bit */
|
|
ack = uec->p_rx_glbl_pram->rxgstpack;
|
|
ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX;
|
|
uec->p_rx_glbl_pram->rxgstpack = ack;
|
|
|
|
/* Keep issuing cmd and checking ack bit until it is asserted */
|
|
do {
|
|
/* Issue host command */
|
|
cecr_subblock =
|
|
ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
|
|
qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
|
|
(u8)QE_CR_PROTOCOL_ETHERNET, 0);
|
|
ack = uec->p_rx_glbl_pram->rxgstpack;
|
|
} while (!(ack & GRACEFUL_STOP_ACKNOWLEDGE_RX));
|
|
|
|
uec->grace_stopped_rx = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_stop(struct uec_priv *uec, comm_dir_e mode)
|
|
{
|
|
/* check if the UCC number is in range. */
|
|
if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
|
|
printf("%s: ucc_num out of range.\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
/* Stop any transmissions */
|
|
if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx)
|
|
uec_graceful_stop_tx(uec);
|
|
|
|
/* Stop any receptions */
|
|
if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx)
|
|
uec_graceful_stop_rx(uec);
|
|
|
|
/* Disable the UCC fast */
|
|
ucc_fast_disable(uec->uccf, mode);
|
|
|
|
/* Disable the MAC */
|
|
uec_mac_disable(uec, mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void qe_uec_stop(struct udevice *dev)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
struct uec_priv *uec = priv->uec;
|
|
|
|
uec_stop(uec, COMM_DIR_RX_AND_TX);
|
|
}
|
|
|
|
static int qe_uec_set_hwaddr(struct udevice *dev)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct uec_priv *uec = priv->uec;
|
|
uec_t *uec_regs = uec->uec_regs;
|
|
uchar *mac = pdata->enetaddr;
|
|
u32 mac_addr1;
|
|
u32 mac_addr2;
|
|
|
|
/*
|
|
* if a station address of 0x12345678ABCD, perform a write to
|
|
* MACSTNADDR1 of 0xCDAB7856,
|
|
* MACSTNADDR2 of 0x34120000
|
|
*/
|
|
|
|
mac_addr1 = (mac[5] << 24) | (mac[4] << 16) |
|
|
(mac[3] << 8) | (mac[2]);
|
|
out_be32(&uec_regs->macstnaddr1, mac_addr1);
|
|
|
|
mac_addr2 = ((mac[1] << 24) | (mac[0] << 16)) & 0xffff0000;
|
|
out_be32(&uec_regs->macstnaddr2, mac_addr2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qe_uec_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
if (packet)
|
|
free(packet);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops qe_uec_eth_ops = {
|
|
.start = qe_uec_start,
|
|
.send = qe_uec_send,
|
|
.recv = qe_uec_recv,
|
|
.free_pkt = qe_uec_free_pkt,
|
|
.stop = qe_uec_stop,
|
|
.write_hwaddr = qe_uec_set_hwaddr,
|
|
};
|
|
|
|
static int uec_convert_threads_num(enum uec_num_of_threads threads_num,
|
|
int *threads_num_ret)
|
|
{
|
|
int num_threads_numerica;
|
|
|
|
switch (threads_num) {
|
|
case UEC_NUM_OF_THREADS_1:
|
|
num_threads_numerica = 1;
|
|
break;
|
|
case UEC_NUM_OF_THREADS_2:
|
|
num_threads_numerica = 2;
|
|
break;
|
|
case UEC_NUM_OF_THREADS_4:
|
|
num_threads_numerica = 4;
|
|
break;
|
|
case UEC_NUM_OF_THREADS_6:
|
|
num_threads_numerica = 6;
|
|
break;
|
|
case UEC_NUM_OF_THREADS_8:
|
|
num_threads_numerica = 8;
|
|
break;
|
|
default:
|
|
printf("%s: Bad number of threads value.",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*threads_num_ret = num_threads_numerica;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void uec_init_tx_parameter(struct uec_priv *uec, int num_threads_tx)
|
|
{
|
|
struct uec_inf *uec_info;
|
|
u32 end_bd;
|
|
u8 bmrx = 0;
|
|
int i;
|
|
|
|
uec_info = uec->uec_info;
|
|
|
|
/* Alloc global Tx parameter RAM page */
|
|
uec->tx_glbl_pram_offset =
|
|
qe_muram_alloc(sizeof(struct uec_tx_global_pram),
|
|
UEC_TX_GLOBAL_PRAM_ALIGNMENT);
|
|
uec->p_tx_glbl_pram = (struct uec_tx_global_pram *)
|
|
qe_muram_addr(uec->tx_glbl_pram_offset);
|
|
|
|
/* Zero the global Tx prameter RAM */
|
|
memset(uec->p_tx_glbl_pram, 0, sizeof(struct uec_tx_global_pram));
|
|
|
|
/* Init global Tx parameter RAM */
|
|
|
|
/* TEMODER, RMON statistics disable, one Tx queue */
|
|
out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE);
|
|
|
|
/* SQPTR */
|
|
uec->send_q_mem_reg_offset =
|
|
qe_muram_alloc(sizeof(struct uec_send_queue_qd),
|
|
UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
|
|
uec->p_send_q_mem_reg = (struct uec_send_queue_mem_region *)
|
|
qe_muram_addr(uec->send_q_mem_reg_offset);
|
|
out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset);
|
|
|
|
/* Setup the table with TxBDs ring */
|
|
end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1)
|
|
* SIZEOFBD;
|
|
out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base,
|
|
(u32)(uec->p_tx_bd_ring));
|
|
out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address,
|
|
end_bd);
|
|
|
|
/* Scheduler Base Pointer, we have only one Tx queue, no need it */
|
|
out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0);
|
|
|
|
/* TxRMON Base Pointer, TxRMON disable, we don't need it */
|
|
out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0);
|
|
|
|
/* TSTATE, global snooping, big endian, the CSB bus selected */
|
|
bmrx = BMR_INIT_VALUE;
|
|
out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT));
|
|
|
|
/* IPH_Offset */
|
|
for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++)
|
|
out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0);
|
|
|
|
/* VTAG table */
|
|
for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++)
|
|
out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0);
|
|
|
|
/* TQPTR */
|
|
uec->thread_dat_tx_offset =
|
|
qe_muram_alloc(num_threads_tx *
|
|
sizeof(struct uec_thread_data_tx) +
|
|
32 * (num_threads_tx == 1),
|
|
UEC_THREAD_DATA_ALIGNMENT);
|
|
|
|
uec->p_thread_data_tx = (struct uec_thread_data_tx *)
|
|
qe_muram_addr(uec->thread_dat_tx_offset);
|
|
out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset);
|
|
}
|
|
|
|
static void uec_init_rx_parameter(struct uec_priv *uec, int num_threads_rx)
|
|
{
|
|
u8 bmrx = 0;
|
|
int i;
|
|
struct uec_82xx_add_filtering_pram *p_af_pram;
|
|
|
|
/* Allocate global Rx parameter RAM page */
|
|
uec->rx_glbl_pram_offset =
|
|
qe_muram_alloc(sizeof(struct uec_rx_global_pram),
|
|
UEC_RX_GLOBAL_PRAM_ALIGNMENT);
|
|
uec->p_rx_glbl_pram = (struct uec_rx_global_pram *)
|
|
qe_muram_addr(uec->rx_glbl_pram_offset);
|
|
|
|
/* Zero Global Rx parameter RAM */
|
|
memset(uec->p_rx_glbl_pram, 0, sizeof(struct uec_rx_global_pram));
|
|
|
|
/* Init global Rx parameter RAM */
|
|
/*
|
|
* REMODER, Extended feature mode disable, VLAN disable,
|
|
* LossLess flow control disable, Receive firmware statisic disable,
|
|
* Extended address parsing mode disable, One Rx queues,
|
|
* Dynamic maximum/minimum frame length disable, IP checksum check
|
|
* disable, IP address alignment disable
|
|
*/
|
|
out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE);
|
|
|
|
/* RQPTR */
|
|
uec->thread_dat_rx_offset =
|
|
qe_muram_alloc(num_threads_rx *
|
|
sizeof(struct uec_thread_data_rx),
|
|
UEC_THREAD_DATA_ALIGNMENT);
|
|
uec->p_thread_data_rx = (struct uec_thread_data_rx *)
|
|
qe_muram_addr(uec->thread_dat_rx_offset);
|
|
out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset);
|
|
|
|
/* Type_or_Len */
|
|
out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072);
|
|
|
|
/* RxRMON base pointer, we don't need it */
|
|
out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0);
|
|
|
|
/* IntCoalescingPTR, we don't need it, no interrupt */
|
|
out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0);
|
|
|
|
/* RSTATE, global snooping, big endian, the CSB bus selected */
|
|
bmrx = BMR_INIT_VALUE;
|
|
out_8(&uec->p_rx_glbl_pram->rstate, bmrx);
|
|
|
|
/* MRBLR */
|
|
out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN);
|
|
|
|
/* RBDQPTR */
|
|
uec->rx_bd_qs_tbl_offset =
|
|
qe_muram_alloc(sizeof(struct uec_rx_bd_queues_entry) +
|
|
sizeof(struct uec_rx_pref_bds),
|
|
UEC_RX_BD_QUEUES_ALIGNMENT);
|
|
uec->p_rx_bd_qs_tbl = (struct uec_rx_bd_queues_entry *)
|
|
qe_muram_addr(uec->rx_bd_qs_tbl_offset);
|
|
|
|
/* Zero it */
|
|
memset(uec->p_rx_bd_qs_tbl, 0, sizeof(struct uec_rx_bd_queues_entry) +
|
|
sizeof(struct uec_rx_pref_bds));
|
|
out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset);
|
|
out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr,
|
|
(u32)uec->p_rx_bd_ring);
|
|
|
|
/* MFLR */
|
|
out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN);
|
|
/* MINFLR */
|
|
out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN);
|
|
/* MAXD1 */
|
|
out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN);
|
|
/* MAXD2 */
|
|
out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN);
|
|
/* ECAM_PTR */
|
|
out_be32(&uec->p_rx_glbl_pram->ecamptr, 0);
|
|
/* L2QT */
|
|
out_be32(&uec->p_rx_glbl_pram->l2qt, 0);
|
|
/* L3QT */
|
|
for (i = 0; i < 8; i++)
|
|
out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0);
|
|
|
|
/* VLAN_TYPE */
|
|
out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100);
|
|
/* TCI */
|
|
out_be16(&uec->p_rx_glbl_pram->vlantci, 0);
|
|
|
|
/* Clear PQ2 style address filtering hash table */
|
|
p_af_pram = (struct uec_82xx_add_filtering_pram *)
|
|
uec->p_rx_glbl_pram->addressfiltering;
|
|
|
|
p_af_pram->iaddr_h = 0;
|
|
p_af_pram->iaddr_l = 0;
|
|
p_af_pram->gaddr_h = 0;
|
|
p_af_pram->gaddr_l = 0;
|
|
}
|
|
|
|
static int uec_issue_init_enet_rxtx_cmd(struct uec_priv *uec,
|
|
int thread_tx, int thread_rx)
|
|
{
|
|
struct uec_init_cmd_pram *p_init_enet_param;
|
|
u32 init_enet_param_offset;
|
|
struct uec_inf *uec_info;
|
|
struct ucc_fast_inf *uf_info;
|
|
int i;
|
|
int snum;
|
|
u32 off;
|
|
u32 entry_val;
|
|
u32 command;
|
|
u32 cecr_subblock;
|
|
|
|
uec_info = uec->uec_info;
|
|
uf_info = &uec_info->uf_info;
|
|
|
|
/* Allocate init enet command parameter */
|
|
uec->init_enet_param_offset =
|
|
qe_muram_alloc(sizeof(struct uec_init_cmd_pram), 4);
|
|
init_enet_param_offset = uec->init_enet_param_offset;
|
|
uec->p_init_enet_param = (struct uec_init_cmd_pram *)
|
|
qe_muram_addr(uec->init_enet_param_offset);
|
|
|
|
/* Zero init enet command struct */
|
|
memset((void *)uec->p_init_enet_param, 0,
|
|
sizeof(struct uec_init_cmd_pram));
|
|
|
|
/* Init the command struct */
|
|
p_init_enet_param = uec->p_init_enet_param;
|
|
p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0;
|
|
p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1;
|
|
p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2;
|
|
p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3;
|
|
p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4;
|
|
p_init_enet_param->largestexternallookupkeysize = 0;
|
|
|
|
p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx)
|
|
<< ENET_INIT_PARAM_RGF_SHIFT;
|
|
p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx)
|
|
<< ENET_INIT_PARAM_TGF_SHIFT;
|
|
|
|
/* Init Rx global parameter pointer */
|
|
p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset |
|
|
(u32)uec_info->risc_rx;
|
|
|
|
/* Init Rx threads */
|
|
for (i = 0; i < (thread_rx + 1); i++) {
|
|
snum = qe_get_snum();
|
|
if (snum < 0) {
|
|
printf("%s can not get snum\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (i == 0) {
|
|
off = 0;
|
|
} else {
|
|
off = qe_muram_alloc(sizeof(struct uec_thread_rx_pram),
|
|
UEC_THREAD_RX_PRAM_ALIGNMENT);
|
|
}
|
|
|
|
entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
|
|
off | (u32)uec_info->risc_rx;
|
|
p_init_enet_param->rxthread[i] = entry_val;
|
|
}
|
|
|
|
/* Init Tx global parameter pointer */
|
|
p_init_enet_param->txglobal = uec->tx_glbl_pram_offset |
|
|
(u32)uec_info->risc_tx;
|
|
|
|
/* Init Tx threads */
|
|
for (i = 0; i < thread_tx; i++) {
|
|
snum = qe_get_snum();
|
|
if (snum < 0) {
|
|
printf("%s can not get snum\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
off = qe_muram_alloc(sizeof(struct uec_thread_tx_pram),
|
|
UEC_THREAD_TX_PRAM_ALIGNMENT);
|
|
|
|
entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
|
|
off | (u32)uec_info->risc_tx;
|
|
p_init_enet_param->txthread[i] = entry_val;
|
|
}
|
|
|
|
__asm__ __volatile__("sync");
|
|
|
|
/* Issue QE command */
|
|
command = QE_INIT_TX_RX;
|
|
cecr_subblock = ucc_fast_get_qe_cr_subblock(uf_info->ucc_num);
|
|
qe_issue_cmd(command, cecr_subblock, (u8)QE_CR_PROTOCOL_ETHERNET,
|
|
init_enet_param_offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_startup(struct udevice *dev)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
struct uec_priv *uec = priv->uec;
|
|
struct uec_inf *uec_info;
|
|
struct ucc_fast_inf *uf_info;
|
|
struct ucc_fast_priv *uccf;
|
|
ucc_fast_t *uf_regs;
|
|
uec_t *uec_regs;
|
|
int num_threads_tx;
|
|
int num_threads_rx;
|
|
u32 utbipar;
|
|
u32 length;
|
|
u32 align;
|
|
struct buffer_descriptor *bd;
|
|
u8 *buf;
|
|
int i;
|
|
|
|
uec_info = uec->uec_info;
|
|
uf_info = &uec_info->uf_info;
|
|
|
|
/* Check if Rx BD ring len is illegal */
|
|
if (uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN ||
|
|
uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT) {
|
|
printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check if Tx BD ring len is illegal */
|
|
if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) {
|
|
printf("%s: Tx BD ring length must not be smaller than 2.\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check if MRBLR is illegal */
|
|
if (MAX_RXBUF_LEN == 0 || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) {
|
|
printf("%s: max rx buffer length must be mutliple of 128.\n",
|
|
__func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Both Rx and Tx are stopped */
|
|
uec->grace_stopped_rx = 1;
|
|
uec->grace_stopped_tx = 1;
|
|
|
|
/* Init UCC fast */
|
|
if (ucc_fast_init(uf_info, &uccf)) {
|
|
printf("%s: failed to init ucc fast\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Save uccf */
|
|
uec->uccf = uccf;
|
|
|
|
/* Convert the Tx threads number */
|
|
if (uec_convert_threads_num(uec_info->num_threads_tx,
|
|
&num_threads_tx))
|
|
return -EINVAL;
|
|
|
|
/* Convert the Rx threads number */
|
|
if (uec_convert_threads_num(uec_info->num_threads_rx,
|
|
&num_threads_rx))
|
|
return -EINVAL;
|
|
|
|
uf_regs = uccf->uf_regs;
|
|
|
|
/* UEC register is following UCC fast registers */
|
|
uec_regs = (uec_t *)(&uf_regs->ucc_eth);
|
|
|
|
/* Save the UEC register pointer to UEC private struct */
|
|
uec->uec_regs = uec_regs;
|
|
|
|
/* Init UPSMR, enable hardware statistics (UCC) */
|
|
out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE);
|
|
|
|
/* Init MACCFG1, flow control disable, disable Tx and Rx */
|
|
out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE);
|
|
|
|
/* Init MACCFG2, length check, MAC PAD and CRC enable */
|
|
out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
|
|
|
|
/* Setup UTBIPAR */
|
|
utbipar = in_be32(&uec_regs->utbipar);
|
|
utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
|
|
|
|
/* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC.
|
|
* This frees up the remaining SMI addresses for use.
|
|
*/
|
|
utbipar |= CONFIG_UTBIPAR_INIT_TBIPA << UTBIPAR_PHY_ADDRESS_SHIFT;
|
|
out_be32(&uec_regs->utbipar, utbipar);
|
|
|
|
/* Allocate Tx BDs */
|
|
length = ((uec_info->tx_bd_ring_len * SIZEOFBD) /
|
|
UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) *
|
|
UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
|
|
if ((uec_info->tx_bd_ring_len * SIZEOFBD) %
|
|
UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT)
|
|
length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
|
|
|
|
align = UEC_TX_BD_RING_ALIGNMENT;
|
|
uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align));
|
|
if (uec->tx_bd_ring_offset != 0)
|
|
uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align)
|
|
& ~(align - 1));
|
|
|
|
/* Zero all of Tx BDs */
|
|
memset((void *)(uec->tx_bd_ring_offset), 0, length + align);
|
|
|
|
/* Allocate Rx BDs */
|
|
length = uec_info->rx_bd_ring_len * SIZEOFBD;
|
|
align = UEC_RX_BD_RING_ALIGNMENT;
|
|
uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align)));
|
|
if (uec->rx_bd_ring_offset != 0)
|
|
uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align)
|
|
& ~(align - 1));
|
|
|
|
/* Zero all of Rx BDs */
|
|
memset((void *)(uec->rx_bd_ring_offset), 0, length + align);
|
|
|
|
/* Allocate Rx buffer */
|
|
length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN;
|
|
align = UEC_RX_DATA_BUF_ALIGNMENT;
|
|
uec->rx_buf_offset = (u32)malloc(length + align);
|
|
if (uec->rx_buf_offset != 0)
|
|
uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align)
|
|
& ~(align - 1));
|
|
|
|
/* Zero all of the Rx buffer */
|
|
memset((void *)(uec->rx_buf_offset), 0, length + align);
|
|
|
|
/* Init TxBD ring */
|
|
bd = (struct buffer_descriptor *)uec->p_tx_bd_ring;
|
|
uec->tx_bd = bd;
|
|
|
|
for (i = 0; i < uec_info->tx_bd_ring_len; i++) {
|
|
BD_DATA_CLEAR(bd);
|
|
BD_STATUS_SET(bd, 0);
|
|
BD_LENGTH_SET(bd, 0);
|
|
bd++;
|
|
}
|
|
BD_STATUS_SET((--bd), TX_BD_WRAP);
|
|
|
|
/* Init RxBD ring */
|
|
bd = (struct buffer_descriptor *)uec->p_rx_bd_ring;
|
|
uec->rx_bd = bd;
|
|
buf = uec->p_rx_buf;
|
|
for (i = 0; i < uec_info->rx_bd_ring_len; i++) {
|
|
BD_DATA_SET(bd, buf);
|
|
BD_LENGTH_SET(bd, 0);
|
|
BD_STATUS_SET(bd, RX_BD_EMPTY);
|
|
buf += MAX_RXBUF_LEN;
|
|
bd++;
|
|
}
|
|
BD_STATUS_SET((--bd), RX_BD_WRAP | RX_BD_EMPTY);
|
|
|
|
/* Init global Tx parameter RAM */
|
|
uec_init_tx_parameter(uec, num_threads_tx);
|
|
|
|
/* Init global Rx parameter RAM */
|
|
uec_init_rx_parameter(uec, num_threads_rx);
|
|
|
|
/* Init ethernet Tx and Rx parameter command */
|
|
if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx,
|
|
num_threads_rx)) {
|
|
printf("%s issue init enet cmd failed\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Convert a string to a QE clock source enum
|
|
*
|
|
* This function takes a string, typically from a property in the device
|
|
* tree, and returns the corresponding "enum qe_clock" value.
|
|
*/
|
|
enum qe_clock qe_clock_source(const char *source)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (strcasecmp(source, "none") == 0)
|
|
return QE_CLK_NONE;
|
|
|
|
if (strncasecmp(source, "brg", 3) == 0) {
|
|
i = simple_strtoul(source + 3, NULL, 10);
|
|
if (i >= 1 && i <= 16)
|
|
return (QE_BRG1 - 1) + i;
|
|
else
|
|
return QE_CLK_DUMMY;
|
|
}
|
|
|
|
if (strncasecmp(source, "clk", 3) == 0) {
|
|
i = simple_strtoul(source + 3, NULL, 10);
|
|
if (i >= 1 && i <= 24)
|
|
return (QE_CLK1 - 1) + i;
|
|
else
|
|
return QE_CLK_DUMMY;
|
|
}
|
|
|
|
return QE_CLK_DUMMY;
|
|
}
|
|
|
|
static void qe_uec_set_eth_type(struct udevice *dev)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
struct uec_priv *uec = priv->uec;
|
|
struct uec_inf *uec_info = uec->uec_info;
|
|
struct ucc_fast_inf *uf_info = &uec_info->uf_info;
|
|
|
|
switch (uec_info->enet_interface_type) {
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_TBI:
|
|
case PHY_INTERFACE_MODE_RTBI:
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
uf_info->eth_type = GIGA_ETH;
|
|
break;
|
|
default:
|
|
uf_info->eth_type = FAST_ETH;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int qe_uec_set_uec_info(struct udevice *dev)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct uec_priv *uec = priv->uec;
|
|
struct uec_inf *uec_info;
|
|
struct ucc_fast_inf *uf_info;
|
|
const char *s;
|
|
int ret;
|
|
u32 val;
|
|
|
|
uec_info = (struct uec_inf *)malloc(sizeof(struct uec_inf));
|
|
if (!uec_info)
|
|
return -ENOMEM;
|
|
|
|
uf_info = &uec_info->uf_info;
|
|
|
|
ret = dev_read_u32(dev, "cell-index", &val);
|
|
if (ret) {
|
|
ret = dev_read_u32(dev, "device-id", &val);
|
|
if (ret) {
|
|
pr_err("no cell-index nor device-id found!");
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
uf_info->ucc_num = val - 1;
|
|
if (uf_info->ucc_num < 0 || uf_info->ucc_num > 7) {
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
ret = dev_read_string_index(dev, "rx-clock-name", 0, &s);
|
|
if (!ret) {
|
|
uf_info->rx_clock = qe_clock_source(s);
|
|
if (uf_info->rx_clock < QE_CLK_NONE ||
|
|
uf_info->rx_clock > QE_CLK24) {
|
|
pr_err("invalid rx-clock-name property\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
} else {
|
|
ret = dev_read_u32(dev, "rx-clock", &val);
|
|
if (ret) {
|
|
/*
|
|
* If both rx-clock-name and rx-clock are missing,
|
|
* we want to tell people to use rx-clock-name.
|
|
*/
|
|
pr_err("missing rx-clock-name property\n");
|
|
goto out;
|
|
}
|
|
if (val < QE_CLK_NONE || val > QE_CLK24) {
|
|
pr_err("invalid rx-clock property\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
uf_info->rx_clock = val;
|
|
}
|
|
|
|
ret = dev_read_string_index(dev, "tx-clock-name", 0, &s);
|
|
if (!ret) {
|
|
uf_info->tx_clock = qe_clock_source(s);
|
|
if (uf_info->tx_clock < QE_CLK_NONE ||
|
|
uf_info->tx_clock > QE_CLK24) {
|
|
pr_err("invalid tx-clock-name property\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
} else {
|
|
ret = dev_read_u32(dev, "tx-clock", &val);
|
|
if (ret) {
|
|
pr_err("missing tx-clock-name property\n");
|
|
goto out;
|
|
}
|
|
if (val < QE_CLK_NONE || val > QE_CLK24) {
|
|
pr_err("invalid tx-clock property\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
uf_info->tx_clock = val;
|
|
}
|
|
|
|
uec_info->num_threads_tx = UEC_NUM_OF_THREADS_1;
|
|
uec_info->num_threads_rx = UEC_NUM_OF_THREADS_1;
|
|
uec_info->risc_tx = QE_RISC_ALLOCATION_RISC1_AND_RISC2;
|
|
uec_info->risc_rx = QE_RISC_ALLOCATION_RISC1_AND_RISC2;
|
|
uec_info->tx_bd_ring_len = 16;
|
|
uec_info->rx_bd_ring_len = 16;
|
|
#if (MAX_QE_RISC == 4)
|
|
uec_info->risc_tx = QE_RISC_ALLOCATION_FOUR_RISCS;
|
|
uec_info->risc_rx = QE_RISC_ALLOCATION_FOUR_RISCS;
|
|
#endif
|
|
|
|
uec_info->enet_interface_type = pdata->phy_interface;
|
|
|
|
uec->uec_info = uec_info;
|
|
qe_uec_set_eth_type(dev);
|
|
|
|
return 0;
|
|
out:
|
|
free(uec_info);
|
|
return ret;
|
|
}
|
|
|
|
static int qe_uec_probe(struct udevice *dev)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct uec_priv *uec;
|
|
int ret;
|
|
|
|
/* Allocate the UEC private struct */
|
|
uec = (struct uec_priv *)malloc(sizeof(struct uec_priv));
|
|
if (!uec)
|
|
return -ENOMEM;
|
|
|
|
memset(uec, 0, sizeof(struct uec_priv));
|
|
priv->uec = uec;
|
|
uec->uec_regs = (uec_t *)pdata->iobase;
|
|
|
|
/* setup uec info struct */
|
|
ret = qe_uec_set_uec_info(dev);
|
|
if (ret) {
|
|
free(uec);
|
|
return ret;
|
|
}
|
|
|
|
ret = uec_startup(dev);
|
|
if (ret) {
|
|
free(uec->uec_info);
|
|
free(uec);
|
|
return ret;
|
|
}
|
|
|
|
priv->phydev = dm_eth_phy_connect(dev);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Remove the driver from an interface:
|
|
* - free up allocated memory
|
|
*/
|
|
static int qe_uec_remove(struct udevice *dev)
|
|
{
|
|
struct qe_uec_priv *priv = dev_get_priv(dev);
|
|
|
|
free(priv->uec);
|
|
return 0;
|
|
}
|
|
|
|
static int qe_uec_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
const char *phy_mode;
|
|
|
|
pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
|
|
|
|
pdata->phy_interface = -1;
|
|
phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
|
|
"phy-connection-type", NULL);
|
|
if (phy_mode)
|
|
pdata->phy_interface = phy_get_interface_by_name(phy_mode);
|
|
if (pdata->phy_interface == -1) {
|
|
debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id qe_uec_ids[] = {
|
|
{ .compatible = QE_UEC_DRIVER_NAME },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(eth_qe_uec) = {
|
|
.name = QE_UEC_DRIVER_NAME,
|
|
.id = UCLASS_ETH,
|
|
.of_match = qe_uec_ids,
|
|
.of_to_plat = qe_uec_of_to_plat,
|
|
.probe = qe_uec_probe,
|
|
.remove = qe_uec_remove,
|
|
.ops = &qe_uec_eth_ops,
|
|
.priv_auto = sizeof(struct qe_uec_priv),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
};
|