mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-22 03:03:05 +00:00
285 lines
6.9 KiB
C
285 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
|
|
* (C) Copyright 2018 Neil Armstrong <narmstrong@baylibre.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <net.h>
|
|
#include <asm/arch/boot.h>
|
|
#include <asm/arch/eth.h>
|
|
#include <asm/arch/g12a.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/meson-vpu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/armv8/mmu.h>
|
|
#include <linux/sizes.h>
|
|
#include <usb.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <asm/arch/usb.h>
|
|
#include <usb/dwc2_udc.h>
|
|
#include <phy.h>
|
|
#include <clk.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int meson_get_boot_device(void)
|
|
{
|
|
return readl(G12A_AO_SEC_GP_CFG0) & G12A_AO_BOOT_DEVICE;
|
|
}
|
|
|
|
/* Configure the reserved memory zones exported by the secure registers
|
|
* into EFI and DTB reserved memory entries.
|
|
*/
|
|
void meson_init_reserved_memory(void *fdt)
|
|
{
|
|
u64 bl31_size, bl31_start;
|
|
u64 bl32_size, bl32_start;
|
|
u32 reg;
|
|
|
|
/*
|
|
* Get ARM Trusted Firmware reserved memory zones in :
|
|
* - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0
|
|
* - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL
|
|
* - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
|
|
*/
|
|
reg = readl(G12A_AO_SEC_GP_CFG3);
|
|
|
|
bl31_size = ((reg & G12A_AO_BL31_RSVMEM_SIZE_MASK)
|
|
>> G12A_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
|
|
bl32_size = (reg & G12A_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
|
|
|
|
bl31_start = readl(G12A_AO_SEC_GP_CFG5);
|
|
bl32_start = readl(G12A_AO_SEC_GP_CFG4);
|
|
|
|
/* Add BL31 reserved zone */
|
|
if (bl31_start && bl31_size)
|
|
meson_board_add_reserved_memory(fdt, bl31_start, bl31_size);
|
|
|
|
/* Add BL32 reserved zone */
|
|
if (bl32_start && bl32_size)
|
|
meson_board_add_reserved_memory(fdt, bl32_start, bl32_size);
|
|
|
|
#if defined(CONFIG_VIDEO_MESON)
|
|
meson_vpu_rsv_fb(fdt);
|
|
#endif
|
|
}
|
|
|
|
phys_size_t get_effective_memsize(void)
|
|
{
|
|
/* Size is reported in MiB, convert it in bytes */
|
|
return min(((readl(G12A_AO_SEC_GP_CFG0) & G12A_AO_MEM_SIZE_MASK)
|
|
>> G12A_AO_MEM_SIZE_SHIFT) * SZ_1M, 0xf5000000);
|
|
}
|
|
|
|
static struct mm_region g12a_mem_map[] = {
|
|
{
|
|
.virt = 0x0UL,
|
|
.phys = 0x0UL,
|
|
.size = 0xf5000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_INNER_SHARE
|
|
}, {
|
|
.virt = 0xf5000000UL,
|
|
.phys = 0xf5000000UL,
|
|
.size = 0x0b000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = g12a_mem_map;
|
|
|
|
static void g12a_enable_external_mdio(void)
|
|
{
|
|
writel(0x0, ETH_PHY_CNTL2);
|
|
}
|
|
|
|
static void g12a_enable_internal_mdio(void)
|
|
{
|
|
/* Fire up the PHY PLL */
|
|
writel(0x29c0040a, ETH_PLL_CNTL0);
|
|
writel(0x927e0000, ETH_PLL_CNTL1);
|
|
writel(0xac5f49e5, ETH_PLL_CNTL2);
|
|
writel(0x00000000, ETH_PLL_CNTL3);
|
|
writel(0x00000000, ETH_PLL_CNTL4);
|
|
writel(0x20200000, ETH_PLL_CNTL5);
|
|
writel(0x0000c002, ETH_PLL_CNTL6);
|
|
writel(0x00000023, ETH_PLL_CNTL7);
|
|
writel(0x39c0040a, ETH_PLL_CNTL0);
|
|
writel(0x19c0040a, ETH_PLL_CNTL0);
|
|
|
|
/* Select the internal MDIO */
|
|
writel(0x33000180, ETH_PHY_CNTL0);
|
|
writel(0x00074043, ETH_PHY_CNTL1);
|
|
writel(0x00000260, ETH_PHY_CNTL2);
|
|
}
|
|
|
|
/* Configure the Ethernet MAC with the requested interface mode
|
|
* with some optional flags.
|
|
*/
|
|
void meson_eth_init(phy_interface_t mode, unsigned int flags)
|
|
{
|
|
switch (mode) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
/* Set RGMII mode */
|
|
setbits_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RGMII |
|
|
G12A_ETH_REG_0_TX_PHASE(1) |
|
|
G12A_ETH_REG_0_TX_RATIO(4) |
|
|
G12A_ETH_REG_0_PHY_CLK_EN |
|
|
G12A_ETH_REG_0_CLK_EN);
|
|
g12a_enable_external_mdio();
|
|
break;
|
|
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
/* Set RMII mode */
|
|
out_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RMII |
|
|
G12A_ETH_REG_0_INVERT_RMII_CLK |
|
|
G12A_ETH_REG_0_CLK_EN);
|
|
|
|
/* Use G12A RMII Internal PHY */
|
|
if (flags & MESON_USE_INTERNAL_RMII_PHY)
|
|
g12a_enable_internal_mdio();
|
|
else
|
|
g12a_enable_external_mdio();
|
|
|
|
break;
|
|
|
|
default:
|
|
printf("Invalid Ethernet interface mode\n");
|
|
return;
|
|
}
|
|
|
|
/* Enable power gate */
|
|
clrbits_le32(G12A_MEM_PD_REG_0, G12A_MEM_PD_REG_0_ETH_MASK);
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(USB_DWC3_MESON_G12A) && \
|
|
CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
|
|
static struct dwc2_plat_otg_data meson_g12a_dwc2_data;
|
|
|
|
int board_usb_init(int index, enum usb_init_type init)
|
|
{
|
|
struct fdtdec_phandle_args args;
|
|
const void *blob = gd->fdt_blob;
|
|
int node, dwc2_node;
|
|
struct udevice *dev, *clk_dev;
|
|
struct clk clk;
|
|
int ret;
|
|
|
|
/* find the usb glue node */
|
|
node = fdt_node_offset_by_compatible(blob, -1,
|
|
"amlogic,meson-g12a-usb-ctrl");
|
|
if (node < 0) {
|
|
debug("Not found usb-control node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!fdtdec_get_is_enabled(blob, node)) {
|
|
debug("usb is disabled in the device tree\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
|
|
if (ret) {
|
|
debug("Not found usb-control device\n");
|
|
return ret;
|
|
}
|
|
|
|
/* find the dwc2 node */
|
|
dwc2_node = fdt_node_offset_by_compatible(blob, node,
|
|
"amlogic,meson-g12a-usb");
|
|
if (dwc2_node < 0) {
|
|
debug("Not found dwc2 node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!fdtdec_get_is_enabled(blob, dwc2_node)) {
|
|
debug("dwc2 is disabled in the device tree\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
meson_g12a_dwc2_data.regs_otg = fdtdec_get_addr(blob, dwc2_node, "reg");
|
|
if (meson_g12a_dwc2_data.regs_otg == FDT_ADDR_T_NONE) {
|
|
debug("usbotg: can't get base address\n");
|
|
return -ENODATA;
|
|
}
|
|
|
|
/* Enable clock */
|
|
ret = fdtdec_parse_phandle_with_args(blob, dwc2_node, "clocks",
|
|
"#clock-cells", 0, 0, &args);
|
|
if (ret) {
|
|
debug("usbotg has no clocks defined in the device tree\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &clk_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (args.args_count != 1) {
|
|
debug("Can't find clock ID in the device tree\n");
|
|
return -ENODATA;
|
|
}
|
|
|
|
clk.dev = clk_dev;
|
|
clk.id = args.args[0];
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret) {
|
|
debug("Failed to enable usbotg clock\n");
|
|
return ret;
|
|
}
|
|
|
|
meson_g12a_dwc2_data.rx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
|
|
"g-rx-fifo-size", 0);
|
|
meson_g12a_dwc2_data.np_tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
|
|
"g-np-tx-fifo-size", 0);
|
|
meson_g12a_dwc2_data.tx_fifo_sz = fdtdec_get_int(blob, dwc2_node,
|
|
"g-tx-fifo-size", 0);
|
|
|
|
/* Switch to peripheral mode */
|
|
ret = dwc3_meson_g12a_force_mode(dev, USB_DR_MODE_PERIPHERAL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return dwc2_udc_probe(&meson_g12a_dwc2_data);
|
|
}
|
|
|
|
int board_usb_cleanup(int index, enum usb_init_type init)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
struct udevice *dev;
|
|
int node;
|
|
int ret;
|
|
|
|
/* find the usb glue node */
|
|
node = fdt_node_offset_by_compatible(blob, -1,
|
|
"amlogic,meson-g12a-usb-ctrl");
|
|
if (node < 0)
|
|
return -ENODEV;
|
|
|
|
if (!fdtdec_get_is_enabled(blob, node))
|
|
return -ENODEV;
|
|
|
|
ret = uclass_get_device_by_of_offset(UCLASS_SIMPLE_BUS, node, &dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Switch to OTG mode */
|
|
ret = dwc3_meson_g12a_force_mode(dev, USB_DR_MODE_HOST);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|