mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 19:43:33 +00:00
61c88ace4b
Device tree alignment with kernel v5.10-rc1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
96 lines
1.9 KiB
Text
96 lines
1.9 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "stm32f746.dtsi"
|
|
#include "stm32f746-pinctrl.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "STMicroelectronics STM32F746-DISCO board";
|
|
compatible = "st,stm32f746-disco", "st,stm32f746";
|
|
|
|
chosen {
|
|
bootargs = "root=/dev/ram";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@c0000000 {
|
|
device_type = "memory";
|
|
reg = <0xC0000000 0x800000>;
|
|
};
|
|
|
|
aliases {
|
|
serial0 = &usart1;
|
|
};
|
|
|
|
usbotg_hs_phy: usb-phy {
|
|
#phy-cells = <0>;
|
|
compatible = "usb-nop-xceiv";
|
|
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
|
|
clock-names = "main_clk";
|
|
};
|
|
|
|
/* This turns on vbus for otg fs for host mode (dwc2) */
|
|
vcc5v_otg_fs: vcc5v-otg-fs-regulator {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&gpiod 5 0>;
|
|
regulator-name = "vcc5_host1";
|
|
regulator-always-on;
|
|
};
|
|
|
|
mmc_vcard: mmc_vcard {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "mmc_vcard";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
&clk_hse {
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-0 = <&i2c1_pins_b>;
|
|
pinctrl-names = "default";
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio1 {
|
|
status = "okay";
|
|
vmmc-supply = <&mmc_vcard>;
|
|
cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "opendrain";
|
|
pinctrl-0 = <&sdio_pins_a>;
|
|
pinctrl-1 = <&sdio_pins_od_a>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
&usart1 {
|
|
pinctrl-0 = <&usart1_pins_b>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_fs {
|
|
dr_mode = "host";
|
|
pinctrl-0 = <&usbotg_fs_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_hs {
|
|
dr_mode = "host";
|
|
phys = <&usbotg_hs_phy>;
|
|
phy-names = "usb2-phy";
|
|
pinctrl-0 = <&usbotg_hs_pins_b>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|